Knape and Vogt SCB 14-3/8" Chrome Bottom Mount Waste Pullout with 2-20 Quart White Bins Soft-Close, SCB15-2-20WH

Knape And Vogt Chrome Bottom Mount Waste Pullout

Knape and Vogt SCB 14-3/8 chrome bottom mount waste pullout is a double trash pull-out designed for cabinet installations where two 20 quart white bins are needed on a single slide assembly. The KV FYSCB Series double trash pull-out uses heavy duty, full extension ball bearing slides with Soft-Close technology, so the unit travels the full length of the slide and then pulls the load gently shut for quieter operation in daily kitchen use. A 1 inch over-travel feature moves the waste bins slightly beyond the cabinet face, making the front edges of the bins easier to reach when emptying or swapping liners. The specialized wire management system holds the bins securely in place, keeping each 20 quart bin seated on the frame during repeated opening and closing in kitchen or bath cabinet environments.

Key Details That Support Daily Cabinet Use

• Heavy duty, full extension ball bearing slides with Soft-Close technology carry the pull-out smoothly to full extension, which helps access both 20 quart bins without reaching deep into the cabinet interior.
• The 1 inch over-travel capability extends the waste bins slightly past the cabinet front, giving extra clearance at the rim of each bin so material can be dumped or lifted out without the cabinet frame interfering.
• A specialized wire management system holds bins securely in place on the frame, which helps prevent shifting during use and supports consistent alignment when the pull-out closes against the cabinet front.
• The system uses two 20 quart white waste bins, providing separated capacity for trash and another waste stream while keeping both containers on one bottom mount assembly in the same cabinet opening.
• Easy installation with only four screws into heavy-duty mounting straps allows the pull-out assembly to be fastened to the cabinet bottom using the integral straps, which streamlines the mounting step for installers.

Bottom Mount Waste Pullout Installation Details

This bottom mount trash pull-out mounts to the cabinet using heavy-duty mounting straps, with installation accomplished using four screws through the straps into the cabinet floor area. The full extension ball bearing slides set the travel path of the frame so the two 20 quart white bins move straight out of the cabinet opening. An easy to attach handle gives a front gripping point once installed on the frame, supporting a consistent pull path. Door mount bracket kits FYPDMKTWH or FYPDMKTPT are required for installation when the cabinet door will be connected to the slide assembly, so the existing door can move with the pull-out rather than opening on separate hinges.

Using This Double Trash Pull-Out In Cabinets

Where This Double 20 Quart Pull-Out Fits Best

This KV FYSCB Series double trash pull-out is part of the Bottom Mount Trash Pullouts product class, so it is suited for cabinet interiors where mounting to the cabinet floor with straps is preferred over side mounting. The 14-3/8 inch chrome frame dimension supports applications where a compact double 20 quart bin layout is needed inside a kitchen or bath cabinet. Two white 20 quart bins provide defined capacity in smaller base cabinet spaces, allowing trash and another waste stream to sit side by side on one pull-out. The chrome frame and wire management system keep the bins seated as the heavy duty full extension slides move the load, which is valuable in higher-use kitchen locations where the pull-out is cycled frequently during daily work.

Why The Soft-Close Slides And Brackets Matter

The heavy duty full extension ball bearing slides with Soft-Close technology support a maximum of 30 lb per bin, with total load not to exceed 80 lb, so the pull-out can carry typical bagged waste loads while the slides control movement. Full extension travel lets the front and rear portions of each 20 quart bin clear the cabinet face frame, which simplifies liner changes and reduces awkward lifting. The 1 inch over-travel adds extra reach past the cabinet front, which helps when emptying heavier bags that need more room to clear the cabinet edge. Door mount bracket kits FYPDMKTWH or FYPDMKTPT are required for installation when connecting a door to the pull-out, giving the assembly a fixed relationship between door and frame during operation. The easy to attach handle further stabilizes user grip on the moving frame, working with the Soft-Close slides to bring the double-bin assembly back into the cabinet in a controlled, predictable motion.

Common Questions About This KV Trash Pull-Out

Choose This KV Pull-Out For Managed Waste

The SCB15-2-20WH double trash pull-out from Knape and Vogt pairs two 20 quart white bins with heavy duty, full extension Soft-Close slides, giving a defined, smooth-travel waste station in a bottom mount format. The specialized wire management system and chrome frame hold the bins securely as the slides move through their full extension and 1 inch over-travel, supporting repeatable operation in kitchen or bath cabinets. With four-screw installation through heavy-duty mounting straps and optional door mount bracket kits FYPDMKTWH or FYPDMKTPT, this pull-out offers a clear, structured way to set up separated waste handling inside a cabinet opening.