Knape And Vogt SCB Trash Pull-Out For Cabinets

Knape and Vogt SCB bottom mount trash pull-out combines a double waste system with guided slide movement so trash stays organized inside the cabinet instead of sitting loose in the opening. The SCB15-2-35WH model uses the KV FYSCB Series layout, so the frame, slides, and bins work together as a single pull-out unit for everyday use. Two 35 quart white bins provide separate containers, which supports tasks like sorting trash and recyclables while still using one cabinet opening. The specialized wire management system holds bins securely in place, so the cans track with the frame instead of shifting, which helps the pull-out move smoothly. Heavy duty, full extension ball bearing slides with Soft-Close technology move the frame fully out of the cabinet, then pull it closed in a controlled way, which keeps the load supported through the entire stroke.

Key Waste Pull-Out Details That Help On The Job

• KV FYSCB Series double trash pull-out design ties the frame, slides, and two 35 quart white bins together, which keeps the waste system consistent across similar cabinet installations.
• Heavy duty, full extension ball bearing slides with Soft-Close technology support the pull-out through the full opening stroke, which lets the installer access both bins without reaching deep into the cabinet.
• The slides provide 1" over-travel, which carries the bins slightly beyond the cabinet face, giving better clearance for bag changes and helping the user see into the containers.
• A specialized wire management system holds bins securely in place, which keeps the containers seated during use so they track cleanly on the slides and reduce rattling.
• Easy installation with only four screws into heavy-duty mounting straps speeds mounting of the bottom frame, which helps keep layout consistent when repeating this setup across multiple cabinets.
• The handle is easy to attach, giving the user a solid pull point, which transfers force cleanly to the frame and slides during opening and closing.

Bottom Mount Trash Pull-Out Installation Details

This bottom mount trash pull-out uses heavy-duty mounting straps so the frame anchors directly to the cabinet base with four screws, which sets a defined reference point for repeatable placement. The design keeps the weight centered over the slide hardware, which helps the 30 lb maximum per bin rating work within the not to exceed 80 lb of total weight guideline. Heavy duty, full extension ball bearing slides with Soft-Close technology control movement, so once mounted square, the hardware guides the bins in and out on a fixed track. The 1" over-travel puts the two 35 quart white bins slightly forward of the cabinet face, which improves access for lining and bag removal while the frame remains fully supported on the slides.

Using The SCB15-2-35WH Double Trash Pull-Out

Where This Double Waste System Fits Best

The SCB15-2-35WH double trash pull-out is part of the Knape and Vogt FYSCB Series, placing it in the bottom mount trash pullouts category for kitchen and bath cabinet installations. Two 35 quart white bins provide defined capacity inside a single opening, which suits cabinets that need both trash and recycling in one location. The specialized wire management system that holds bins securely in place supports repeated use in busy rooms, because the containers remain captured by the frame instead of drifting as they fill. Heavy duty, full extension ball bearing slides with Soft-Close technology and 1" over-travel move the bins fully beyond the cabinet face, giving clear access even when the cabinet interior is deeper than the door line. Door mount bracket kits FYPDMKTWH or FYPDMKTPT are required for installation, tying the cabinet door directly to the pull-out frame so the door and waste system move together.

Details That Support Smooth, Repeatable Operation

The soft-close heavy duty slides support the waste system through repeated openings by guiding the frame on ball bearings, which helps maintain alignment under the 30 lb maximum per bin rating and not to exceed 80 lb of total weight guideline. Full extension with 1" over-travel brings the 35 quart white bins forward, which reduces interference from face frames or adjacent doors while the user loads or empties the cans. The specialized wire management system that holds bins securely in place keeps each container seated in its pocket, which supports consistent clearances around the slides and reduces lateral movement that could affect tracking. Easy installation with only four screws into heavy-duty mounting straps simplifies setting the frame, which helps installers match locations from cabinet to cabinet. Waste bins are available in white and platinum, which lets the installer coordinate bin color with other interior components when selecting units for a run of cabinets.

Common Questions About This KV Trash Pull-Out

Selecting This FYSCB Series Unit For Your Build

The Knape and Vogt SCB15-2-35WH pairs KV FYSCB Series engineering with two 35 quart white bins, giving a defined double waste setup inside a bottom mount frame. Heavy duty, full extension ball bearing slides with Soft-Close technology and 1" over-travel support daily use while keeping access consistent. The specialized wire management system holds bins securely in place, which helps the pull-out track smoothly after installation. With weight capacity set at 30 lb maximum per bin and not to exceed 80 lb of total weight, this bottom mount trash pull-out aligns well with cabinet projects that need a controlled, cabinet-depth waste solution.