Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Domestics Bliss pull 96mm brushed nickel identifies a Berenson Domestic Bliss Series cabinet pull with a 3-3/4 inch (96 mm) center to center dimension, so it works wherever that standard drill pattern is laid out on doors or drawer fronts. The pull is described with a total length of 4-1/2 inches, which gives clear coverage across typical residential or light commercial cabinet face widths. A projection of 1-3/8 inches sets the handle out from the fascia, providing finger clearance for a solid grip on everyday cabinet openings. The stated width of 5/8 inch defines the front profile, so installers can visualize how much visual weight this pull adds to a stile or rail. Material is specified as zinc, which provides a stable base metal for interior decorative hardware applications. The finish is listed as brushed nickel, giving a muted metallic look that coordinates with many contemporary hinge and fixture finishes.
The 3-3/4 inch (96 mm) center to center dimension on this Berenson Domestic Bliss Series pull sets precise screw locations, which simplifies layout when drilling new fronts or aligning with existing bored holes. With an overall length of 4-1/2 inches, the pull spans slightly beyond the hole pattern, so the attachment points remain concealed behind the bar in finished installations. The 1-3/8 inch projection defines how far the grip stands off the cabinet face, influencing both knuckle clearance and how deep drawers can be relative to nearby doors or trim. A 5/8 inch width controls edge distance from stile or rail margins, helping keep the hardware centered on narrow frames without overwhelming smaller fronts.
This Berenson Domestic Bliss Series pull is described with a 3-3/4 inch (96 mm) center to center sizing, which pairs well with cabinets bored on the widely used 96 mm standard, from kitchen wall units to bath vanities. The 4-1/2 inch overall length lets the pull sit proportionally on both medium-width drawers and standard cabinet doors, so runs of fronts can share a consistent hardware look. A projection of 1-3/8 inches sets the gripping surface away from the fascia, which helps when doors sit near adjacent walls, tall panels, or appliance faces where clearance matters. The 5/8 inch width offers a narrow bar that reads clean on face frames and full-overlay fronts, keeping lines simple when hardware is repeated across many openings. With zinc specified as the material and brushed nickel specified as the finish, this pull aligns visually with other brushed nickel decorative hardware elements in the same space.
The defined 96 mm (3-3/4 inch) center to center measurement on this pull supports repeatable drilling patterns, so installers can use the same template location across a full bank of doors and drawers without layout changes. Because the total length is listed as 4-1/2 inches, there is predictable overhang beyond the mounting holes, which helps line up hardware relative to rail edges or drawer top lines for uniform sightlines. The 1-3/8 inch projection influences how stacked drawers clear vertical pulls on nearby doors, giving a known stand-off dimension when planning tight reveals. A 5/8 inch width provides a consistent bar thickness, so hands feel the same grip edge on every cabinet front outfitted with this piece. The combination of zinc construction and brushed nickel finish delivers a single material-and-finish specification, which simplifies matching this pull with other Berenson Domestic Bliss components specified with the same finish language.
The Berenson Domestic Bliss Series pull has a center to center measurement of 3-3/4 inches (96 mm), which matches drilling patterns laid out on that common cabinet hardware spacing.
The 2339-1BPN-P pull length is specified as 4-1/2 inches, so it extends beyond the mounting holes to give a full handhold across standard drawer and door widths.
The Domestic Bliss brushed nickel zinc pull has a projection of 1-3/8 inches, setting the grip forward from the cabinet face for finger clearance and everyday access.
The pull width is listed as 5/8 inch, giving a slim bar profile that keeps the hardware visually light while still offering a defined edge to grasp.
The Berenson Domestic Bliss pull is described as zinc material with a brushed nickel finish, pairing an interior hardware base metal with a muted metallic appearance.
This pull is identified by manufacturer part number 2339-1BPN-P, which distinguishes this 96 mm center to center brushed nickel model within the Domestic Bliss Series.
The Berenson Domestic Bliss Series 2339-1BPN-P pull gives a defined 3-3/4 inch (96 mm) center to center size, so it fits layouts based on that common spacing in kitchens, baths, and casework runs. With a 4-1/2 inch overall length, 1-3/8 inch projection, and 5/8 inch width, the handle profile is clearly specified for planning sightlines and clearances. The zinc construction and brushed nickel finish are stated, so the pull aligns with projects designed around brushed nickel decorative hardware from Wurth Baer Supply.
Sold In: 1 Each
