Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Domestic Bliss pull gives you a 5-1/16 inch (128 mm) center to center handle that lines up with standard drilling, so you can lay out cabinet fronts or replace existing pulls using familiar measurements. The pull is part of the Domestic Bliss collection, which keeps style consistent across multiple doors and drawers on the same job. Its zinc construction provides a solid cabinet handle body while keeping weight manageable when used on multiple fronts. The modern brushed gold finish delivers a contemporary brushed look that supports design plans calling for warm metallic tones without a mirror gloss. Overall length of 5-3/4 inches sets the hand grip span, giving fingers clearance across typical drawer widths. A projection of 1-3/8 inches stands the pull off the face frame, providing grab space for hands when opening doors or drawers in tight run layouts.
This Berenson Corporation handle uses a 5-1/16 inch (128 mm) center to center dimension, so drill points fall 128 mm apart when laying out mounting holes. That spacing aligns with common cabinet hardware standards, which helps when matching existing fronts bored at that measurement. The 5-3/4 inch length gives you a clear sense of how much rail space the pull will occupy across a stile or drawer front. With a 1-3/8 inch projection, the hardware stands off the surface enough to grip around the bar, which supports everyday opening and closing without fingers crowding the panel face. The 5/8 inch width defines the front profile, so the pull reads as a streamlined modern bar across both framed and frameless cabinet designs.
The Domestic Bliss collection identity ties this pull to a coordinated hardware family, which matters when pairing multiple handles in a kitchen, bath, or millwork project that needs consistent style. With a 5-1/16 inch (128 mm) center to center setup, the pull suits cabinet doors and drawers drilled to that common spacing, allowing runs of fronts to share the same hardware line. Overall length of 5-3/4 inches keeps the handle scaled for standard base and wall cabinets, helping it sit comfortably on both narrow doors and medium-width drawers. The modern brushed gold finish supports design plans that call for a warm metallic accent, so hardware can act as a consistent visual element against painted or wood fronts. Zinc construction supports repeated daily use at the grip point, which is important on busy doors and drawers in high-use areas.
The defined 5-1/16 inch (128 mm) center to center measurement allows installers to use fixed drilling templates, which cuts layout time and helps keep pulls straight across long cabinet runs. A 1-3/8 inch projection means the bar stands out a predictable distance, so door and drawer fronts open with room for fingers between the pull and the cabinet face. The 5/8 inch width gives a slim cross-section, helping the pull sit neatly on narrow rails while still providing tactile feedback when grasped. The 5-3/4 inch overall length provides an easy reference when planning edge clearances near adjacent fronts or walls. The modern brushed gold finish remains constant across each piece in this style, which helps keep color and sheen uniform when multiple pulls are mounted side by side. Zinc material construction keeps the piece consistently formed, supporting uniform alignment when several pulls are installed in visual groups.
The Berenson Domestic Bliss Series pull has a 5-1/16 inch (128 mm) center to center, 5-3/4 inch overall length, 1-3/8 inch projection, and 5/8 inch width, which define its fit and hand clearance.
The 5-1/16 inch (128 mm) center to center spacing matches common cabinet boring patterns, supporting straightforward drilling and alignment across doors and drawers using that standard.
The 2347-1MDB-P pull is made from zinc, which provides a solid cabinet handle body while keeping weight manageable on multi-front installations.
This pull has a modern brushed gold finish, giving it a warm brushed metallic look that coordinates with contemporary cabinet designs using gold-tone hardware.
The Berenson Domestic Bliss pull has a 1-3/8 inch projection, which sets the distance from the cabinet face and creates working finger clearance behind the handle.
This Berenson Corporation zinc handle is classified under decorative hardware and moldings as a handle and pull, suited for cabinet doors and drawers.
The Domestic Bliss Series 5-1/16 inch (128 mm) center to center modern brushed gold pull from Berenson Corporation combines a defined drilling pattern with a 5-3/4 inch overall length that fits many cabinet fronts. Zinc construction and a 1-3/8 inch projection give a solid-feeling grip with practical clearance on doors and drawers. When a project calls for a modern brushed gold look in a coordinated collection, this handle offers known measurements and a consistent finish that support clean, repeatable cabinet hardware layouts.
Sold In: 1 Each
