Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rakks EH Series 9 surface mount bracket is a workstation and countertop bracket designed to support counters and work surfaces. The bracket is part of the Rakks EH Series, which identifies it as a counter support style used for work areas that need open space below for legs or equipment. It is rated at 650 lbs, so it carries heavy countertop loads in workstations where strength is critical. The bracket supports counters up to 30 inches deep, so it serves typical countertop depths in commercial, shop, or utility layouts. It is classified as a workstation and countertop bracket, so it suits installations where a counter must handle active use instead of light-duty display loads. The product is manufactured by Rangine Corp/Rakks, so it aligns with other Rakks counter support components in projects that standardize on that line.
The EH-1209W/P surface mount bracket is identified as a surface mount design, so it attaches directly to the supporting structure instead of recessing into it. That mounting style benefits projects where existing walls or frames must remain intact. The bracket is specified to support counters up to 30 inches deep, which guides bracket placement relative to front edges so the depth range stays within the intended support envelope. Its 650 lbs capacity sets expectations for how many brackets are used along a run when planning support spacing. As a workstation and countertop bracket, it is suited to mounting beneath work surfaces where clear space under the counter must be preserved for accessibility and ergonomic legroom.
The Rakks EH Series 9 surface mount bracket is described as keeping work areas open and accessible, so it supports counters without blocking the space beneath with cabinet boxes or legs. That open area is helpful in workstations where users need to move freely or roll equipment under the surface. The product is stated to improve handicapped accessibility, so the unobstructed underside supports designs that allow wheelchair access. Supporting counters up to 30 inches deep means the bracket works with standard-depth worktops in labs, shops, or service areas that need clearance underneath. Because it is a counter support bracket in the workstation and countertop bracket class, it fits installations where the work surface is a primary working zone rather than decorative shelving.
The 650 lbs rating is a key detail because it defines how the counter support bracket behaves under substantial static or active loads on work surfaces. That capacity matters where equipment, materials, or concentrated loads regularly rest on the countertop. The bracket is manufactured from structural aluminum, so it uses a material chosen for strength in a manageable weight, which helps during handling and positioning at installation. Structural aluminum is also described as easy-to-recycle, so it supports projects where material lifecycle and recyclability are part of the specification. The off-white/prime finish identified in the product name provides a neutral appearance that blends into many interiors, which helps counters visually integrate into workspaces without drawing attention to the support hardware. As part of the Rakks EH Series, the bracket follows a defined product line that supports repeatable selection across multiple stations in the same project.
The Rakks counter support bracket is used in workstation and countertop installations where counters up to 30 inches deep need structural support while keeping the area beneath open.
The EH-1209W/P surface mount bracket supports counters up to 30 inches deep, so it fits standard countertop depths in many work, shop, or service layouts.
The bracket is rated at 650 lbs, giving it heavy duty capacity for counters that regularly carry equipment, materials, or concentrated loads in active work areas.
The workstation and countertop bracket is manufactured from structural aluminum, providing strength in a lighter material that is also described as easy-to-recycle for material lifecycle planning.
The counter support bracket keeps work areas open and accessible and is described as improving handicapped accessibility by supporting counters without bulky supports underneath.
The EH-1209W/P surface mount bracket has an off-white/prime finish, giving it a neutral appearance that works with many countertop and workspace color schemes.
The Rakks EH Series 9 surface mount bracket, off-white/prime finish, delivers a defined 650 lbs rating for counters up to 30 inches deep, so it supports heavy duty workstation and countertop layouts. Its role as a counter support bracket that keeps work areas open and accessible aligns well with projects that prioritize legroom and handicapped accessibility beneath the work surface. Manufactured from structural aluminum, it fits installations where strength, recyclability, and a neutral off-white appearance all factor into hardware selection for new workstations or counter retrofits.
Sold In: 1 Each
