Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rakks EH Series 12 inch flush mount bracket is a workstation and countertop bracket designed to support counters while keeping the area below open and accessible, which helps when a clear work zone or legroom is needed under a surface. The bracket uses an L-shaped vertical leg that is screwed to the side of the stud, so the load is carried back into the wall structure rather than relying on surface-mount fasteners alone. For applications requiring nearly invisible support, the design allows drywall to be installed around the bracket, hiding the vertical support so only the horizontal arm remains visible at the finished wall face. The 14 inch depth reflects overall depth before mounting, giving a clear reference when laying out rough framing and bracket position. A 430 lbs rating defines the load the bracket is designed to support, which helps when planning heavier counters or work surfaces.
The 14 inch overall depth before mounting describes the size of the bracket from the stud side to the front of the arm, which is useful when locating the bracket within the wall cavity during rough framing. Once drywall is in place, the arm will protrude 12 inch from outside of finished drywall, giving a clear reference for where the countertop or work surface can be set relative to the wall face. The L-shaped vertical leg that is screwed to the side of the stud positions the load along the stud side, which supports counters without projecting visible structural members into the room. With a 430 lbs support rating, the bracket is suited for applications where substantial loads are expected on the counter span it supports.
Rakks counter support brackets keep work areas open and accessible, which suits workstations, countertops, and similar surfaces where clear space below the top is important. The flush mount construction with an L-shaped vertical leg that is screwed to the side of the stud places the structural component inside the wall, so finished areas keep their clearance while still gaining support from the framing. After installation of the bracket, drywall is installed around the bracket hiding the vertical support, which makes the bracket practical in visible spaces where exposed steel supports would conflict with the design. The arm will protrude 12 inch from outside of finished drywall, which lines up well with many standard depth counter or shelf layouts that sit close to the wall. A 430 lbs support rating makes the bracket relevant wherever robust support is needed along a wall-mounted counter run or similar horizontal surface. The black finish aligns with installations where darker hardware is preferred at the exposed arm.
The 14 inch depth reflecting overall depth before mounting provides a consistent reference for framing and bracket spacing, which simplifies repeating the same layout along a run of studs for multiple supports. Because the bracket uses an L-shaped vertical leg that is screwed to the side of the stud, each bracket engages the same stud face, which helps produce predictable structural behavior across all supports. After installation of the bracket, drywall is installed around the bracket hiding the vertical support, so finished walls along a counter line present the same clean appearance even where multiple brackets are used. Aluminum faceplates with adhesive backing create a finished installation by covering exposed bracket surfaces, which gives a uniform look from bracket to bracket without separate finishing steps. The arm will protrude 12 inch from outside of finished drywall, giving installers a stable dimension when setting front edges of counters or worktops along a wall. The 430 lbs rating defines the capacity of the bracket, which helps when spacing brackets along heavier work surfaces to keep loading within that design range.
The Rakks EH Series 12 inch flush mount bracket is a workstation and countertop bracket, so it is intended to support counters or similar horizontal work surfaces at a wall.
The Rakks EH-1212FM-B bracket arm will protrude 12 inch from outside of finished drywall, helping define the usable depth for the supported counter or work surface.
The Rakks counter support bracket uses an L-shaped vertical leg that is screwed to the side of the stud, so the load is tied directly into the wall framing.
The 14 inch depth reflects the overall depth of the bracket before mounting, which is the front-to-back size used when planning its position relative to the stud and drywall.
The Rakks EH-1212FM-B flush mount bracket is described with a 430 lbs rating, setting expectations for the load it is designed to support along a counter span.
The Rakks counter support bracket installs with its L-shaped vertical leg inside the wall, and drywall is installed around the bracket hiding the vertical support from view.
Choosing the Rakks EH Series 12 inch flush mount bracket, black finish, EH-1212FM-B, provides a workstation and countertop bracket that keeps work areas open and accessible while delivering a 430 lbs support rating. The L-shaped vertical leg that is screwed to the side of the stud places support inside the wall, and drywall installed around the bracket hiding the vertical support maintains a clean finished appearance. With a 14 inch overall depth before mounting and a 12 inch arm protruding from outside of finished drywall, layout for counter depth and bracket spacing can follow clear dimensions for consistent installations.
Sold In: 1 Each
