Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rakks EH Series 18 surface mount bracket is a workstation and countertop bracket designed to support counters in work areas. This Rakks counter support bracket is built to keep work areas open and accessible, so tradespeople can work beneath or around the counter without bulky legs in the way. Rated for 450 lbs, it provides heavy duty support for counters up to 30 inches deep, giving solid bearing for dense tops and busy workstations. The 18 inch by 18 inch geometry works well where a right-angle support is needed along walls or casework. Manufactured from easy-to-recycle structural aluminum, it offers strength with relatively low weight, which helps during layout and mounting on walls or framing. The mill finish provides a straightforward, job-ready surface suited to back-of-house, shop, or utility environments where function and support capacity matter most.
This Rakks EH Series 18 inch by 18 inch surface mount bracket is sized as a right-angle support for counters up to 30 inches deep, so it can sit back from the front edge while still carrying the load. Being a workstation and countertop bracket, it is intended to mount along a supporting surface to carry the counter above, which makes it useful under wall-hung runs or workstation sections where floor space needs to stay clear. Its 450 lbs capacity per bracket gives clear guidance when spacing brackets along the run, which helps installers align support points to studs, blocking, or other structural members. Structural aluminum construction means the bracket remains rigid under expected loads, maintaining counter alignment during regular use. The mill finish surface works well in environments where the bracket may remain visible but does not require a decorative coated appearance.
The Rakks EH Series 18 inch surface mount bracket functions as a workstation and countertop bracket for shelf, closet, and garage organization, so it suits storage counters, shop benches, and utility tops along walls. Its ability to keep work areas open and accessible supports layouts where wheelchairs, stools, or rolling carts need to move beneath the counter. Heavy duty support for counters up to 30 inches deep means it pairs well with common laminate, wood, or composite tops sized within that depth, giving flexibility across different rooms in the same project. The 18 by 18 geometry works in corners, mid-span locations, or at terminations where a right-angle support plate is practical. Structural aluminum construction keeps it suitable for woodworking and shop environments supplied by Wurth Baer Supply, aligning with other cabinet hardware and surfacing materials on the job.
The Rakks counter support bracket rating of 450 lbs per EH-1818 bracket provides a clear load figure, which helps installers plan bracket intervals to keep counters level under equipment and daily use. Because these Rakks counter support brackets are manufactured from structural aluminum, they resist flexing under working loads, helping maintain tight joints at backsplashes or adjacent tops. The easy-to-recycle aluminum means offcuts or retired brackets move directly into metal recycling streams, supporting shop waste routines without special handling. A mill finish surface removes the need to manage painted layers during drilling or minor field adjustments, so installers can cut or modify contact areas without dealing with coating damage. Serving as a workstation and countertop bracket within the shelving and accessories category, this EH-1818 part integrates into broader storage and work area planning, supporting both counters and organization systems supplied through Wurth Baer Supply.
The EH-1818 is a Rakks EH Series 18 inch surface mount workstation and countertop bracket, so it is intended to support counters and work surfaces along a mounting surface.
This Rakks counter support bracket is rated at 450 lbs, which allows it to carry substantial countertop and workstation loads when spaced appropriately along a run.
The EH-1818 provides heavy duty support for counters up to 30 inches deep, so it suits many standard countertop depths used in shops and work areas.
The Rakks EH Series bracket is manufactured from structural aluminum, giving it strength with relatively low weight and allowing straightforward metal recycling after service life.
This EH-1818 bracket has a mill finish, which means the aluminum surface is bare and suitable for functional installations in shops, utility areas, or back-of-house counters.
This workstation and countertop bracket is used wherever counters need support while keeping the work area open and accessible, such as benches, service tops, or utility counters.
The Rakks EH Series 18 surface mount bracket gives a defined 450 lbs capacity and support for counters up to 30 inches deep, so it fits demanding workstation and countertop layouts. Structural aluminum construction and mill finish create a practical, job-ready bracket for shops and commercial spaces. Sourcing this EH-1818 counter support from Wurth Baer Supply aligns it with other shelving and accessories used in woodworking and organization projects, helping keep your work areas open while providing reliable counter support.
Sold In: 1 Each
