Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rakks 18 inch flush mount bracket is a workstation and countertop bracket designed for applications requiring nearly invisible support. The bracket uses an L-shaped vertical leg that is screwed to the side of the stud, so the load is carried directly into the framing where installers need strength. After installation of the bracket, drywall is installed around the bracket hiding the vertical support, which leaves a clean look while the structure remains buried in the wall. The 20 in depth reflects overall depth before mounting, giving planners a clear starting dimension during layout. Once installed, the arm will protrude 18 in from outside of finished drywall, so shelf or countertop depth can be matched to that working projection.
The 20 in depth reflects overall depth before mounting, so during framing the installer can position the bracket to capture that full length within the stud bay. When the bracket is set and secured, drywall is installed around the bracket hiding the vertical support, which lets the wall finish run flat while still integrating the concealed hardware. After the wall is finished, the arm will protrude 18 in from outside of finished drywall, giving a known, repeatable support depth for shelves, counters, or work surfaces. The bracket uses an L-shaped vertical leg that is screwed to the side of the stud, tying the horizontal arm directly into the stud plane for a straightforward alignment process.
This product is part of the Workstation and Countertop Brackets product class, so it is suited to shelf, closet, and garage organization as well as general shelving and accessories layouts. The bracket uses an L-shaped vertical leg that is screwed to the side of the stud, which means it occupies the stud bay and works behind drywall in typical wood-framed or similar wall constructions. For applications requiring nearly invisible support, drywall is installed around the bracket hiding the vertical support, so the visible portion is just the projecting arm ready to receive a shelf or work surface. The 20 in depth reflects overall depth before mounting, which helps align this bracket with deeper worktops or storage shelves in planning drawings.
The arm will protrude 18 in from outside of finished drywall, giving installers a fixed dimension that simplifies repeating bracket locations along a run of shelving or a long workstation. Because the 20 in depth reflects overall depth before mounting, installers can position the bracket so the concealed length is fully captured in the wall, promoting consistent embedment from bracket to bracket. The bracket is specified in the SAP description as supporting 300 lbs, so within that reference capacity it can serve heavier-duty shelf or countertop applications without changing the visible minimalist appearance. For applications requiring nearly invisible support, hiding the vertical support behind drywall keeps the finished room free of exposed brackets while preserving the load path into the stud. Being a Rakks EH Series bracket with manufacturer part number EH-1818FM-A, it aligns with projects that standardize on this series for repeat layouts across multiple rooms, helping maintain consistent detailing.
The Rakks EH-1818FM-A bracket has a 20 in depth that reflects overall depth before mounting, so planning and framing can use this full dimension when locating studs and clearances.
The arm of this flush mount support will protrude 18 in from outside of finished drywall, giving a clear working projection for sizing shelves, countertops, or work surfaces.
The bracket uses an L-shaped vertical leg that is screwed to the side of the stud, so the vertical component fastens directly into the stud face inside the wall.
The SAP description specifies 300 lbs for this flush mount support, giving specifiers a numeric reference when selecting it for heavier workstation, shelf, or countertop applications.
For applications requiring nearly invisible support, drywall is installed around the bracket hiding the vertical support, leaving only the projecting arm exposed in the finished space.
This Rakks EH Series bracket is classified under workstation and countertop brackets and shelf, closet and garage organization, fitting projects that need concealed support for horizontal surfaces.
This Rakks EH Series 18 inch flush mount bracket from Rangine Corp/Rakks combines an L-shaped vertical leg screwed to the side of the stud with a 20 in overall depth and 18 in arm projection from finished drywall, plus a 300 lbs reference rating. For shelf, closet, garage, workstation, or countertop layouts where nearly invisible support and clear planning dimensions are important, this EH-1818FM-A bracket stocked by Wurth Baer Supply offers a defined geometry and load reference that can be repeated across your project.
Sold In: 1 Each
