Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Rakks EH Series 24 inch flush mount bracket gives a nearly invisible support solution for shelves, workstations, and countertops where clean lines matter. This workstation and countertop bracket uses a flush mount design, so the hardware disappears visually once installed. The bracket is in the Workstation and Countertop Brackets product class, which positions it for projects demanding sturdy structural support in a minimal footprint. The clear anodized finish on the bracket creates a neutral, professional look that pairs well with a wide range of surface materials in shops, offices, and residential spaces. A 26 inch depth reflects the overall depth before mounting, defining the design envelope during layout. The arm then protrudes 24 inches from the outside of finished drywall, which sets a clear working dimension when sizing tops, shelves, or counters over the support.
This Rakks EH Series flush mount bracket is defined by a 26 inch depth before mounting, so it is sized for deeper shelves, counters, or work surfaces that benefit from hidden supports. Once framed and hung, drywall is installed around the L-shaped vertical leg, and the arm will protrude 24 inches from the outside of finished drywall. That 24 inch projection sets the working span for the supported surface, which is a common depth for many countertop and workbench layouts. The bracket is screwed to the side of the stud, so it ties into structural framing rather than relying on face-mount wall finishes, giving the support a direct load path. This side-of-stud mounting style is especially useful when planning ahead during framing or remodeling work.
The Rakks EH Series 24 inch flush mount bracket is part of the Shelf, Closet & Garage Organization and Shelving & Accessories category, so it suits storage and work surface projects along framed walls. In workstations and countertop applications, the nearly invisible support design allows clear knee space and unobstructed access beneath the surface because the L-shaped vertical leg ends up hidden behind drywall. The arm extending 24 inches from the outside of finished drywall matches common countertop depths, making it practical for run-after-run installations in offices, shops, and utility spaces. Since the bracket is screwed to the side of the stud, it integrates smoothly into stud-wall construction, supporting shelving or counters in closets, garages, or work areas without exposed brackets interrupting the finished look.
Mounting the L-shaped vertical leg to the side of the stud creates a direct structural connection, which supports the 300 lbs capacity described in the product data in a way that aligns with typical wall framing. Anchoring into the stud side rather than relying on face-mounted fasteners helps keep loads in line with structural members, which is especially important along longer runs of countertop or shelving. After installation of the bracket, drywall is installed around the bracket hiding the vertical support, allowing finish trades to treat the wall like a standard surface while still preserving the hidden structural arm. The 26 inch overall depth before mounting gives planners a reference that helps coordinate stud placement, bracket spacing, and drywall openings. Once the wall is finished, the arm will protrude 24 inches from the outside of finished drywall, creating a predictable support projection that simplifies cutting, aligning, and fastening worktops and shelves for consistent overhangs along the entire run.
The Rakks EH Series 24 inch flush mount bracket provides nearly invisible support by hiding its vertical leg behind drywall while leaving a horizontal arm to carry shelves, workstations, or countertops.
The bracket uses an L-shaped vertical leg that is screwed to the side of the stud, so it fastens directly into wall framing and creates a strong structural connection for the horizontal arm.
The Rakks EH Series arm will protrude 24 inches from the outside of finished drywall, giving a defined support depth for typical countertop or deep shelf layouts.
The 26 inch depth reflects the overall depth before mounting, providing a planning dimension that helps coordinate framing, bracket placement, and surface sizing.
The clear anodized finish gives the bracket a neutral, professional look that blends with many surface materials and keeps the exposed arm visually clean in finished spaces.
Aluminum faceplates with adhesive backing are applied to the bracket, creating a more finished installation where the arm is visible beneath the supported surface.
The Rakks EH Series 24 inch flush mount bracket, EH-1824FM-A, is designed for applications requiring nearly invisible support along framed walls. Its L-shaped vertical leg screws to the side of the stud, and drywall is installed around the bracket hiding that vertical member while the arm projects 24 inches from the outside of finished drywall. With a 26 inch overall depth before mounting and a clear anodized finish, this workstation and countertop bracket aligns well with many shelf, closet, garage, and work surface layouts. For projects handled through Wurth Baer Supply, this bracket offers a defined set of dimensions and installation details that support repeatable, clean-looking runs.
Sold In: 1 Each
