CompX National Pin Tumbler Deadbolt Lock, Surface Mount with 1-5/8" Cylinder, Keyed Alike 107 Code

CompX National Deadbolt Lock For Drawers

CompX National pin tumbler deadbolt lock gives drawers a dedicated locking point, so the bolt secures directly into the strike and helps resist casual prying in everyday shop and cabinet use. This surface mount deadbolt lock installs on the drawer, which keeps the body accessible from the inside of the case for layout and service. The 1-5/8 inch cylinder length is sized for typical drawer fronts, so the key head remains reachable while the lock body stays behind the panel. A satin chrome finish provides a clean, neutral look that suits many commercial and residential projects where visible hardware needs to stay understated. The lock is keyed alike to 107 code, so multiple units with that code operate from the same key, simplifying key management where several drawers use the same lock number.

Key Deadbolt Details For Job Planning

• The pin tumbler deadbolt design drives a solid bolt into the mating strike, which provides a positive stop point for the drawer and adds security at the lock point in typical cabinet installations.
• Surface mount construction allows the lock body to sit on the drawer surface, which avoids complex mortising and helps speed layout when retrofitting existing casework.
• The 1-5/8 inch cylinder length positions the key head forward of the drawer front, which keeps key access practical while the locking body remains inside the drawer for protection.
• The required 57/64 inch diameter hole for the cylinder gives a precise boring target, which helps drilling crews use standard bits and maintain consistent alignment across multiple drawers.
• ANSI/BHMA certified Grade 2 A156.11 rating means the lock meets a published performance standard, which helps specifiers match it to projects that call out that specific grade.
• Stock keying in the 107 keyed alike code allows multiple locks ordered in that code to share a key, which reduces the number of keys needed at the jobsite or facility.

Surface Mount Drawer Lock Installation Focus

This surface mount deadbolt lock is built for drawer applications where the lock mounts directly to the drawer body, keeping work straightforward for installers used to face boring. The required 57/64 inch diameter hole for the cylinder gives a clear drilling dimension, so production teams can set up jigs or stops around that size. The 1-5/8 inch cylinder length works with typical drawer front thickness ranges, helping the cylinder reach through the front while leaving enough body depth for the bolt housing. With key removal possible in both locked and unlocked positions, crews can move keys out of the way during the rest of the cabinet install, reducing handling while cases are being set and trimmed.

Using This Deadbolt Lock In Real Projects

Where This Satin Chrome Drawer Lock Fits

This drawer lock, described as a drawer lock with satin chrome finish, suits projects where the cylinder face remains visible on the drawer front and needs a neutral tone. Being in the deadbolt locks class, it uses a bolt action that seats into the supplied strike plate C2009-14A, so the drawer engages a defined pocket in the cabinet frame or rail. The surface mount design makes it a match for new work or retrofit drawers where there is interior access for fastening. Its category as a lock and latch component positions it for use in commercial millwork, shop fixtures, or built-in residential cabinets that require a keyed drawer location. Because it is keyed alike to 107 code, multiple drawers using this same code can be set up to operate on a single key pattern, which is useful in areas where a limited set of users needs access.

Details That Support Repeatable Lock Installations

The manufacturer part number C8180-107-26D identifies a specific combination of surface mount body, 1-5/8 inch cylinder, satin chrome finish, and keyed alike 107 code, which helps purchasing and field teams match replacements to existing installations without reworking bores. Requiring a 57/64 inch cylinder hole standardizes the boring step, letting installers use the same hole size across drawers to keep face alignment consistent. The pin tumbler mechanism engages only when the key operates the lock, and the fact that the key is removable in both locked and unlocked positions means drawers can be left open or closed without a key hanging from the cylinder, aiding day-to-day use in offices or shops. ANSI/BHMA Grade 2 A156.11 certification signals that the lock is built to a defined test standard, which helps spec-driven projects align this model with other Grade 2 door and cabinet hardware on the same job. Reference to the NLC2017 trim ring series for cases where a trim ring is required provides a matching trim option when a project calls for a finished collar around the cylinder on the drawer front.

Common Questions About This Drawer Deadbolt Lock

Choose This Deadbolt Lock For Keyed Drawers

This CompX National pin tumbler deadbolt lock with 1-5/8 inch cylinder, satin chrome finish, and 57/64 inch required cylinder hole gives a defined, repeatable setup for locking drawers. The keyed alike 107 code and ANSI/BHMA Grade 2 A156.11 rating align it with projects needing consistent keying and a recognized performance grade. Selecting the C8180-107-26D model ties your order directly to those specifications, helping field crews match bores, finishes, and keying patterns across all drawers on the job.