Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
CompX National pin tumbler deadbolt lock gives a drawer installation a keyed control point using a surface mount body and a 1-5/8 inch cylinder. This deadbolt lock works as a drawer lock in satin chrome, so the hardware provides a finished look while the deadbolt function secures the front. The design uses pin tumbler keying, which supports consistent operation during frequent daily use in cabinet or casework drawers. As a surface mount deadbolt lock, it mounts on the drawer, allowing the keyed cylinder to present through the front and engage the strike location. The keyed alike 915 code configuration keeps multiple locks on the same key number, which simplifies key management in shops or commercial projects where the same operator needs access across several drawers.
This CompX National drawer lock uses a surface mount configuration, so the body attaches to the drawer while the 1-5/8 inch cylinder projects through the bored 57/64 inch hole in the drawer front. Using the specified hole diameter keeps the cylinder aligned, which helps the deadbolt engage the strike location smoothly when the key turns. The key-operated deadbolt requires the key to move the bolt into or out of the locked position, and because the key is removable in both locked and unlocked positions, a user can lock a drawer and remove the key, or unlock it and store the key elsewhere.
This CompX National pin tumbler deadbolt lock is designed as a drawer lock in satin chrome, so it suits casework or cabinet drawers where a keyed deadbolt is needed rather than a simple latch. The surface mount design keeps the working lock body inside the drawer while the cylinder passes through the front panel, which helps maintain a clean exterior appearance. The 57/64 inch cylinder hole requirement matches the specified 1-5/8 inch cylinder, so installers can standardize drilling operations across multiple drawers in a run. With stock KA keyed alike 915 code options available, multiple locks can share the 915 key number, which benefits installations where one key should operate every secured drawer in an office, retail counter, or shop fixture.
The ANSI/BHMA Grade 2 A156.11 certification on this deadbolt lock provides a defined performance level for the lock assembly, which supports its use in projects where drawers see repeated daily locking cycles. Because the key is required to engage the lock and is removable in both locked and unlocked positions, the locking routine stays predictable: a user turns the key to throw or retract the deadbolt, then either retains or pockets the key as needed. The keyed alike and keyed different stock keying options allow planners to decide whether multiple locks share a key or operate on separate key numbers, which can reduce rework on site by aligning hardware ordering with the intended key control scheme before installation. The manufacturer part number C8180-915-26D identifies this exact satin chrome surface mount configuration, helping buyers match specifications across drawings, schedules, and reorders when the same drawer lock is needed again.
The C8180-915-26D is a CompX National pin tumbler deadbolt lock designed as a surface mount drawer lock in satin chrome, which provides a keyed deadbolt function for drawer fronts.
The CompX National pin tumbler deadbolt lock requires a 57/64 inch diameter hole for the cylinder, so boring that size in the drawer front positions the 1-5/8 inch cylinder correctly.
The CompX National drawer lock has a 1-5/8 inch cylinder, which lets the keyed portion extend through the drawer front while the lock body remains surface mounted inside.
The deadbolt lock requires the key to engage the lock, and the key is removable in both locked and unlocked positions, allowing flexible key handling during normal use.
This CompX National deadbolt lock is ANSI/BHMA certified Grade 2 A156.11, which aligns the product with a recognized deadbolt performance standard for demanding applications.
Stock keying on this lock includes KA keyed alike to a specified key number and KD keyed different across various lock numbers, supporting different key control setups.
The CompX National pin tumbler deadbolt lock with 1-5/8 inch cylinder in satin chrome gives drawer projects a defined keyed control point, supported by ANSI/BHMA Grade 2 A156.11 performance. The 57/64 inch cylinder hole requirement, surface mount layout, and keyed alike 915 code option help installers and project planners match drilling, layout, and keying plans to a consistent, documented lock model.
Sold In: 1 Each
