Pro 1.5W LED Tape - Pro Value Series L-PT15W-3R-60

Pro 1.5W LED Tape For Cabinet Lighting Runs

Pro 1.5W LED Tape is a 12V LED tape lighting run rated at 1.5 watts per 12 inches, so each foot delivers planned light output while keeping power loads predictable on a low-voltage system. The tape delivers a 3000K color temperature, which produces a warm white appearance that suits residential and commercial millwork where a softer tone is preferred. The LED tape is supplied on a 16.4 foot roll, giving a continuous length for longer straight runs or multiple shorter cuts on one job. A 100 degree beam spread distributes light broadly along the mounting surface, which helps reduce hot spots on cabinets, shelves, or displays. The tape is rated for a bulb life of 25,000 hours, which supports long-term installations where access behind cabinets or fixtures is limited. The series is backed by a 1 year warranty, reflecting its defined service expectation.

Key LED Tape Details That Support Your Layout

• The 1.5 watts per 12 inch rating sets a known power draw per segment, which helps when sizing drivers and laying out multiple runs on a shared low-voltage circuit.
• The 12V rating matches common low-voltage systems, so the tape works within standard cabinet and display lighting plans that use dedicated 12V supplies.
• The 3000K light color provides a warm white tone, which suits kitchens, casework, and retail displays where a softer, less blue light is often preferred.
• The 16.4 foot length on a single roll allows longer continuous runs, which helps reduce cut points and potential shadow gaps along cabinet or shelving runs.
• The 100 degree beam spread sends light over a wide area, which supports more even illumination across counters, shelves, and interior cabinet surfaces.
• The 25,000 hour bulb life rating supports extended use in permanently mounted applications where frequent lamp changes would be disruptive.

LED Tape Mounting And Power Component Setup

This Pro Value Series LED tape uses a 12V system, so it is designed to be powered through low-voltage components rather than directly from line voltage. The tape can be cut every 2 inches, which allows the installer to trim segments closely to cabinet or shelf dimensions for a clean fit. A 79 inch lead cord, item SZL-PTPCL-79IN-1, is required with this tape, so each run can be connected back to the power side using a defined cord length. When dimming from a wall dimmer, a dimmable driver is required, identified as RSL-DCE30D-CON-1 or RSL-DCE60D-CON-1 together with control components SZL-PRODIVAWH1 or SZL-PROSKYWH-1OR, which creates a system where wall control and driver are matched. When lighting is not dimmed from a wall dimmer, a power supply such as SZL-PRO-15ELT-1, SZL-PRO-30ELT-1, or SZL-PRO-60ELT-1 is required, so the tape runs on a dedicated 12V supply sized to the load.

Using Pro Value Series Tape In Real Projects

Where This 12V LED Tape Fits Best

This LED tape is classified under LED Tape Lighting, so it is aligned with undercabinet, toe-kick, and display applications where linear light is required along woodwork or fixtures. The 3/8 inch width keeps the tape compact, which suits tight channels or the underside of cabinet faces where profile depth is limited. The 5/64 inch height keeps the strip low profile against mounting surfaces, helping it sit discreetly along trim or casework. A 3000K color point supports uses where warmer light is chosen to complement wood tones, laminates, and solid surfaces in kitchens or commercial interiors. The 16.4 foot roll length allows installers to cover longer runs such as continuous upper cabinets or extended display shelving using one product code. LED tape in this class is suited to projects supplied by Wurth Baer Supply that focus on cabinetry and woodworking installations.

Details That Help Achieve Consistent Lighting Results

The 1.5 watts per 12 inch power draw provides a predictable load, which simplifies selecting between the SZL-PRO-15ELT-1, SZL-PRO-30ELT-1, and SZL-PRO-60ELT-1 power supplies so the driver capacity aligns with total tape length. The ability to cut the tape every 2 inches helps installations end precisely near cabinet edges or recesses, reducing dark gaps and overhangs. A 100 degree beam spread distributes light broadly from each LED, supporting smoother wash effects on backsplashes, shelves, or display panels without concentrating light into narrow bands. The 25,000 hour bulb life rating is relevant on built-in cabinetry where tape is concealed, because it supports extended service intervals on fixed millwork projects. When dimming from a wall dimmer, matching the tape with RSL-DCE30D-CON-1 or RSL-DCE60D-CON-1 and the SZL-PRODIVAWH1 or SZL-PROSKYWH-1OR components keeps control and power elements within one coordinated system. The 79 inch lead cord SZL-PTPCL-79IN-1 connects the tape run back to these power components, giving a defined distance from the lit area to drivers or supplies.

Common Questions About Pro 1.5W LED Tape Use

Choose This 12V LED Tape For Defined Runs

The Pro 1.5W LED Tape provides a 16.4 foot, 12V linear lighting option with 1.5 watts per 12 inches and a 3000K warm white output, aligning power load and color for cabinet and display work. The ability to cut every 2 inches, combined with a 100 degree beam spread, helps achieve even coverage along detailed millwork. With specified lead cord, dimmable driver, and power supply options, this tape integrates into organized low-voltage layouts. Select this Pro Value Series model L-PT15W-3R-60 when a defined 12V LED tape lighting solution is needed for woodworking and cabinet projects.