Pro 1.5W LED Tape - Pro Value Series L-PT15W-5R-60

Pro 1.5W LED Tape For Task Lighting

Pro 1.5W LED Tape delivers 1.5 watts per 12 inches at 12V, providing a predictable light load per foot so layouts can be planned around available driver capacity and circuit runs without guesswork during installation. The 5000K color temperature creates a neutral, bright white appearance that supports clear visibility on work surfaces and in cabinet interiors where color clarity and detail matter. The tape uses a 100 degree beam spread, which throws light broadly along the mounting surface to reduce harsh hotspots and help create more even illumination across shelves, toe kicks, or display areas. The 16.4 foot length on each roll offers continuous coverage for longer runs, so fewer splices are needed when lighting extended cabinet banks or counters. The tape operates at 12V, aligning with common low-voltage lighting setups used in shop, kitchen, and display projects.

Key LED Tape Details That Support Your Project

• The 16.4 foot roll length gives a single continuous run for many cabinet, counter, or display applications, reducing cut points and simplifying layout on straight or gently turning installations.
• Power consumption of 1.5 watts per 12 inches provides a clear watt-per-foot number, so total load can be calculated easily when pairing this tape with appropriate drivers or power supplies.
• The 5000K color temperature creates a bright, neutral white light that supports accurate viewing of materials, finishes, and workpieces in shop or cabinetry settings.
• A 100 degree beam spread distributes light broadly from the mounting surface, helping minimize pronounced hot spots and supporting more even illumination along the length of the tape.
• The bulb life rated at 25,000 hours provides a long service interval in typical cabinet and task lighting use, which limits the need for frequent replacements once installed.
• Overall size of 16.4 feet long by 3/8 inch wide by 5/64 inch high keeps the tape low profile, allowing concealed installation in tight channels or under cabinet lips.
• The tape can be cut every 2 inches, which allows sections to be trimmed closer to exact cabinet or shelf dimensions without leaving large unlit gaps at the ends.

LED Tape Mounting, Cutting, And Power Setup

This Pro Value Series LED tape is sized at 3/8 inch wide by 5/64 inch high, so it fits into narrow runs where minimal visual impact is important once mounted along cabinets or shelving. The tape is designed to be cut every 2 inches, which lets installers tailor lengths to actual field measurements while still following the specified cut points. With a power draw of 1.5 watts per 12 inches at 12V, each run can be matched to an appropriate power supply or driver based on its total length. A 79 inch lead cord, sold separately as item SZL-PTPCL-79IN-1, serves as a required component, giving a defined connection interface from the tape to the chosen driver or power supply. For dimming from a wall dimmer, a dimmable driver such as item RSL-DCE30D-CON-1 or RSL-DCE60D-CON-1 and SZL-PRODIVAWH1 or SZL-PROSKYWH-1OR is specified as required components, establishing a clear path for integrating this tape into wall-controlled lighting zones.

Using Pro Value Series LED Tape In Real Projects

Where This 12V LED Tape Fits Best

The Pro Value Series LED tape, identified by manufacturer part L-PT15W-5R-60, is a 12V solution that suits cabinet, shelving, and display environments needing low-profile linear light. The 16.4 foot length supports continuous runs under upper cabinets, along toe kicks, or across longer display cases without frequent joins. With 1.5 watts per 12 inches, the tape offers moderate light output suitable for task or accent use where controlled power consumption is important across multiple runs. The 5000K color temperature supports areas where a bright, neutral tone is preferred, such as work counters or retail shelving. The 100 degree beam spread helps the tape perform in locations where light needs to wash surfaces rather than produce narrow spots, providing broad coverage along backsplashes or case interiors. Its 3/8 inch width and 5/64 inch height help it sit discreetly in shallow channels or behind trim, keeping the focus on the illuminated surface instead of the light source.

Details That Support Reliable, Repeatable Results

The ability to cut this LED tape every 2 inches allows installers to align lengths with cabinet modules, shelves, and niche dimensions, which helps maintain consistent light coverage and tidy terminations at each section. A specified bulb life of 25,000 hours means once the tape is installed in finished millwork, it is designed for extended service before replacement is needed, which is important when access becomes more difficult after casework is in place. The explicit wattage of 1.5 watts per 12 inches at 12V simplifies power planning, as total wattage for each run can be calculated directly from the measured length. Required components are defined: the 79 inch lead cord SZL-PTPCL-79IN-1 connects the tape to power, while dimmable drivers RSL-DCE30D-CON-1 or RSL-DCE60D-CON-1 with SZL-PRODIVAWH1 or SZL-PROSKYWH-1OR are specified when dimming from a wall dimmer, and power supplies SZL-PRO-15ELT-1, SZL-PRO-30ELT-1, or SZL-PRO-60ELT-1 are specified when not using a wall dimmer. These clearly listed components define how the tape integrates into low-voltage lighting systems.

Common Questions About Pro 1.5W LED Tape Use

Selecting This LED Tape For Your Next Run

The Pro 1.5W LED Tape from the Pro Value Series combines a 16.4 foot length, 12V operation, 1.5 watts per 12 inches, and 5000K output to support cabinet, shelf, and display lighting layouts. Its low profile 3/8 inch by 5/64 inch size and 100 degree beam spread help it integrate cleanly while delivering broad illumination. With a 25,000 hour bulb life and defined required components for power and dimming, this tape offers a clearly specified path from layout to energized installation. Put it to work where consistent, neutral white linear lighting is needed across cabinetry or work areas.