
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Pro 3W LED Tape delivers 3 watts per 12 inches at 12V, providing a predictable light output that helps plan runs and power loads across cabinets, shelving, or display areas. The 3000K color temperature produces a warm appearance that suits residential and commercial interiors where comfortable, neutral light is preferred for working and viewing surfaces. The tape is 16.4 feet long, so longer straight runs can be handled with a single product length, simplifying layout on cases or counters. A 100 degree beam spread throws light broadly across adjacent surfaces, helping reduce hot spots along the run. The tape measures 3/8 inch wide by 5/64 inch high, so it fits into tight channels or under cabinet lips without interfering with door or drawer operation. Rated bulb life of 25,000 hours supports long-term service in regularly used installations.
The Pro 3W LED Tape can be cut every 1 inch, giving installers fine control when fitting the 16.4 foot roll to cabinet, shelving, or niche dimensions. This close cutting interval helps align tape terminations with corners or obstacles, reducing dead zones at the ends of runs. A 79 inch lead cord, item SZL-PTPCL-79IN-1, is required to connect the tape to power, so the working length of the tape can be placed while the cord routes back to the driver or power supply. The 12V rating ties directly to the specified drivers and power supplies, helping keep the low-voltage side consistent across an installation.
This Pro 3W LED Tape from the Pro Value Series is designed as LED tape lighting, so it suits under-cabinet, shelving, and display use where a low-profile strip is needed. The 16.4 foot roll length allows continuous runs along kitchen uppers, long counters, or store fixtures without frequent transitions. With a 100 degree beam spread, the tape can be positioned near the cabinet front to cast light across work surfaces, helping reduce dark areas under wall cabinets. The compact 3/8 inch width and 5/64 inch height let it sit in shallow channels routed into cabinet bottoms or display trim. At 3000K, the color tone aligns with many warm to neutral lamp selections in surrounding fixtures, which helps maintain a unified look in multi-source lighting layouts.
The output of 3 watts per 12 inches gives a simple rule of thumb for calculating power needs on each L-PT3W-3R-60 run, which supports consistent brightness when multiple sections are used in the same room. Because the tape can be cut every 1 inch, installers can tailor each segment closely to cabinet or shelf dimensions, which helps keep terminations out of sight while maintaining even spacing along faces. The required 79 inch lead cord SZL-PTPCL-79IN-1 separates the power connection from the lit portion, allowing drivers or power supplies to be placed in more accessible or ventilated areas. When dimming from a wall dimmer, a dimmable driver such as RSL-DCE30D-CON-1 or RSL-DCE60D-CON-1 with SZL-PRODIVAWH1 or SZL-PROSKYWH-1OR is required, which ties the tape into wall control schemes. If wall dimming is not used, power supplies SZL-PRO-15ELT-1, SZL-PRO-30ELT-1, or SZL-PRO-60ELT-1 match the 12V requirement so that different run lengths can be supported from appropriately sized units.
The Pro 3W LED Tape is specified at 12V, which means it operates on a low-voltage system using the matching drivers or power supplies listed for this product.
The L-PT3W-3R-60 Pro 3W LED Tape roll is 16.4 feet long, allowing extended runs along cabinets, counters, or display cases without frequent joining of shorter strips.
The Pro 3W LED Tape can be cut every 1 inch, which allows installers to match cabinet or shelf dimensions closely while maintaining consistent light coverage.
The Pro 3W LED Tape is rated at 3000K, giving a warm light appearance that coordinates well with many residential and commercial ambient lighting schemes.
The Pro 3W LED Tape has a 100 degree beam spread, which distributes light broadly over work surfaces or displays to reduce spotty areas along the run.
The Pro 3W LED Tape requires a 79 inch lead cord SZL-PTPCL-79IN-1 and either a dimmable driver or a designated power supply, depending on whether wall dimming is used.
The Pro 3W LED Tape from the Pro Value Series combines a 16.4 foot length, 3 watts per 12 inches at 12V, and 3000K output to handle many under-cabinet and display layouts. Its 100 degree beam spread, compact 3/8 inch by 5/64 inch profile, and cut points every 1 inch support precise fit along cabinetry or fixtures. With 25,000 hour bulb life and clearly specified drivers, power supplies, and lead cord, this L-PT3W-3R-60 tape offers a defined solution for low-profile linear lighting runs.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | SZL-EXTCON-3IN-1 Mfr# L-EXTCON-3IN-1 | R157 Extension Cord, 3" | ||||
Sold in: 1 Each | SZL-EXTCON-48IN-1 Mfr# L-EXTCON-48IN-1 | R161 Extension Cord, 48" |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | SZL-PTCON-48IN-1 Mfr# L-PTCON-48IN-1 | R143 Linking Wire, 48", White |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | SZL-RNDTD-NI-1 Mfr# L-RNDTD-NI-1 | R152 60W Round Touch Dimmer, 2-3/8", Nickel | ||||
Sold in: 1 Each | SZL-PWIRE25-RB-1 Mfr# L-PWIRE25-RB-1 | 300" Roll 18 Gauge Linking Wire, Red/Black | ||||
Sold in: 1 Each | SZL-RNDDS-NI-1 Mfr# L-RNDDS-NI-1 | Door Sensor Switch 60 Watts, Round - Pro Value Series L-RNDDS-NI-1 | ||||
Sold in: 1 Each | SZL-ROTDIM-BL-1 Mfr# L-ROTDIM-BL-1 | Rotary Dimmer 48 Watts - Pro Value Series L-ROTDIM-BL-1 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RSL-DCE60D-CON-1 Mfr# L-DCE60D-CON-1 | 60W Hardwire Power Supply, 6-11/16", Black | ||||
Sold in: 1 Each | RSL-DCE30D-CON-1 Mfr# L-DCE30D-CON-1 | T611 30W Dimmable LED Power Supply with Mounting Block, 6-1/8", Black |