
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Pro 3W LED Tape delivers 3 watts per 12 inches at 12 volts, providing a consistent output that suits task and accent lighting where predictable light levels help keep projects uniform from section to section. The 5000K color temperature produces a neutral daylight-style tone that supports clear visibility along counters, work surfaces, or display shelving. A bulb life of 25,000 hours keeps maintenance intervals spread out over long-term installations where access is limited. The tape roll measures 16.4 feet long, giving enough length for continuous runs in kitchens, offices, and casework without frequent splices. At 3/8 inch width and 5/64 inch height, the low-profile format fits tight channels and under-cabinet spaces where clearance is limited. A 100 degree beam spread throws light broadly along the mounting surface so the run appears even instead of creating narrow hotspots.
This LED tape operates at 12 volts, so each run works within low-voltage wiring practices that are common in under-cabinet and display lighting. The tape can be cut every 1 inch, allowing installers to trim sections to exact cabinet or niche dimensions while keeping electrical design based on predictable increments. A 79 inch lead cord, item SZL-PTPCL-79IN-1, is a required component, providing a defined connection length from tape to driver or power supply. When dimming from a wall dimmer, a dimmable driver is required, using item RSL-DCE30D-CON-1 or RSL-DCE60D-CON-1 in combination with SZL-PRODIVAWH1 or SZL-PROSKYWH-1OR, which structures the system around matched control components. If the installation is not dimmed from a wall dimmer, a power supply using SZL-PRO-15ELT-1, SZL-PRO-30ELT-1, or SZL-PRO-60ELT-1 is required so the tape receives the correct 12 volt feed.
This LED tape belongs to the Pro Value Series LED tape lighting class, positioning it for cabinet, display, and casework applications where continuous linear light is preferred. The 100 degree beam spread distributes light broadly across backsplashes, shelves, and interiors, helping reduce shadow lines under upper cabinets or within tall pantry units. With 3 watts per 12 inches, each section outputs defined power, which supports runs where designers want a balanced level from one cabinet bay to the next. The 5000K color temperature is suited to work zones that benefit from a neutral tone, such as shop displays or residential kitchens, where material colors need to read accurately. The slim 3/8 inch by 5/64 inch profile fits neatly into routed channels in wood, aluminum extrusions, or under cabinet lips so the fixture stays hidden while the work surface receives uniform light.
The 16.4 foot roll format gives a predictable maximum run length from a single piece, which simplifies design when dividing larger projects into multiple circuits and drivers. Being able to cut every 1 inch lets installers tailor sections to custom cabinet widths, improving fit at end panels and inside reveals without relying on excess coiled tape. Operating at 12 volts aligns this tape with common low-voltage power supplies, so item SZL-PRO-15ELT-1, SZL-PRO-30ELT-1, or SZL-PRO-60ELT-1 can be selected around known load calculations based on the 3 watts per 12 inches rating. When dimming from a wall dimmer, matching the tape with dimmable drivers RSL-DCE30D-CON-1 or RSL-DCE60D-CON-1 plus SZL-PRODIVAWH1 or SZL-PROSKYWH-1OR keeps the control system consistent from job to job. The 25,000 hour bulb life supports longer service intervals in built-in cabinetry, which reduces the frequency of revisiting finished millwork. The 1 year warranty adds a defined support period that aligns with many project punch-list timelines.
Pro 3W LED Tape uses 3 watts per 12 inches at 12 volts, which helps plan driver and power supply capacity based on run length and keeps the system within low-voltage ranges.
The LED tape is supplied as a 16.4 foot roll, allowing extended runs along cabinets or shelving before needing to transition to another length or circuit.
Pro 3W LED Tape can be cut every 1 inch, supporting precise fits in custom cabinetry or displays where exact terminations at panels or uprights are important.
The tape operates at 5000K color temperature, giving a neutral daylight-style output that helps maintain color clarity on counters, products, and materials.
When dimming from a wall dimmer, this tape uses dimmable drivers RSL-DCE30D-CON-1 or RSL-DCE60D-CON-1 with SZL-PRODIVAWH1 or SZL-PROSKYWH-1OR to complete the dimming setup.
For non-dimmed installations, this LED tape uses power supplies SZL-PRO-15ELT-1, SZL-PRO-30ELT-1, or SZL-PRO-60ELT-1 to provide the required 12 volt power.
Pro 3W LED Tape from the Pro Value Series combines a 16.4 foot roll, 3 watts per 12 inches power rating, and 12 volt operation to support well-planned cabinet and display lighting layouts. The 5000K output, 100 degree beam spread, and 25,000 hour bulb life provide consistent performance across long-term installations. With cut points every 1 inch and a defined set of required components, this tape integrates into projects with clear expectations on power, control, and fit. Select this model when you want LED tape that aligns directly with item-numbered drivers, power supplies, and lead cords for repeatable project standards.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | SZL-RNDTD-NI-1 Mfr# L-RNDTD-NI-1 | R152 60W Round Touch Dimmer, 2-3/8", Nickel | ||||
Sold in: 1 Each | SZL-PWIRE25-RB-1 Mfr# L-PWIRE25-RB-1 | 300" Roll 18 Gauge Linking Wire, Red/Black | ||||
Sold in: 1 Each | SZL-RNDDS-NI-1 Mfr# L-RNDDS-NI-1 | Door Sensor Switch 60 Watts, Round - Pro Value Series L-RNDDS-NI-1 | ||||
Sold in: 1 Each | SZL-ROTDIM-BL-1 Mfr# L-ROTDIM-BL-1 | Rotary Dimmer 48 Watts - Pro Value Series L-ROTDIM-BL-1 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RSL-DCE30D-CON-1 Mfr# L-DCE30D-CON-1 | T611 30W Dimmable LED Power Supply with Mounting Block, 6-1/8", Black | ||||
Sold in: 1 Each | RSL-DCE60D-CON-1 Mfr# L-DCE60D-CON-1 | 60W Hardwire Power Supply, 6-11/16", Black |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | SZL-PTCON-48IN-1 Mfr# L-PTCON-48IN-1 | R143 Linking Wire, 48", White |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | SZL-EXTCON-3IN-1 Mfr# L-EXTCON-3IN-1 | R157 Extension Cord, 3" | ||||
Sold in: 1 Each | SZL-EXTCON-48IN-1 Mfr# L-EXTCON-48IN-1 | R161 Extension Cord, 48" |