
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Pro 1.5W LED Splash Proof Tape delivers 1.5 watts per 12 inch segment at 12 V, so installers can plan load and power supply sizing accurately on longer runs. The 3000K light output keeps the tape in a warm white range, which suits residential and commercial millwork where softer task or accent lighting is preferred. A clear plastic covering over the tape provides splash protection, helping the LEDs handle typical moisture-prone areas around counters or work surfaces. The tape length of 16.4 feet per roll lets you cover common cabinet and shelving runs in one piece, which reduces splices along the run. With a rated bulb life of 25,000 hours, the tape supports long-term installations where access for changeout is limited. A 100 degree beam spread helps the light wash evenly across surfaces, which is useful for continuous undercabinet or display applications.
This LED tape uses a 12 V system, so every installation ties back to low-voltage layout planning and dedicated LED power components. The product requires a 79 inch lead cord, item SZL-PTPCL-79IN-1, which connects the tape to downstream control or power hardware and gives enough length to route wiring into cabinets or utility spaces. For jobs using a wall dimmer, a dimmable driver is specified as a required component, with options RSL-DCE30D-CON-1 or RSL-DCE60D-CON-1 paired with SZL-PRODIVAWH1 or SZL-PROSKYWH-1, giving flexibility to match driver capacity and wall control style to the lighting load. For non-dimmed installations, the tape uses a dedicated power supply, with choices SZL-PRO-15ELT-1, SZL-PRO-30ELT-1, or SZL-PRO-60ELT-1, so the installer can select a supply sized to the total wattage of connected tape runs.
This Pro Value Series LED tape is designed around a 16.4 foot length, which matches many continuous undercabinet, toe-kick, or display shelf runs, allowing a single strip to handle typical spans in kitchens or commercial casework. The ability to cut the tape every 2 inches means each run can be trimmed to match cabinet widths, staggered shelves, or segmented niches while keeping the light continuous. With splash proof protection from the clear plastic covering, the tape supports installs around counters, backsplashes, and other locations where water spray or cleaning moisture is expected. The 3000K color temperature keeps lighting consistent with warm ambient sources often used in residential and hospitality work, which helps maintain color uniformity across the space. Its 100 degree beam spread works well where fixtures are hidden but need to throw light across deeper counters or display areas, delivering edge-to-edge coverage along the working surface.
The defined draw of 1.5 watts per 12 inch section allows installers to calculate total load by counting segments, which leads directly to selecting the correct Pro Value Series power supply or dimmable driver from the listed options. The 12 V low-voltage format keeps component selection aligned with the specified drivers RSL-DCE30D-CON-1 or RSL-DCE60D-CON-1 and power supplies SZL-PRO-15ELT-1, SZL-PRO-30ELT-1, or SZL-PRO-60ELT-1, which supports standardized layouts across multiple projects. Being able to shorten the tape every 2 inches simplifies repeatable cutting templates for cabinet shops, so the same measurements can be replicated across a run of identical casework. The 25,000 hour bulb life rating supports long-term performance in built-in installations, which reduces service calls after cabinetry or fixtures are completed. The 79 inch lead cord requirement defines the transition point from visible millwork into concealed wiring zones, helping designers and installers coordinate access holes and chase locations.
The Pro 1.5W LED Splash Proof Tape is 16.4 feet long, which lets installers cover typical cabinet or display runs in a single strip for smoother, continuous lighting.
The LED tape can be cut every 2 inches, allowing cabinetmakers and electricians to size each run precisely to cabinet widths or shelf spans without large offcuts.
The tape operates at 12 V and draws 1.5 watts per 12 inches, so total wattage is calculated by run length and matched to the specified Pro Value Series power supplies or drivers.
This LED tape uses a required 79 inch lead cord, item SZL-PTPCL-79IN-1, which connects the strip to drivers or power supplies and provides routing distance into hidden wiring areas.
For wall dimmer control, the tape uses dimmable drivers RSL-DCE30D-CON-1 or RSL-DCE60D-CON-1 together with wall components SZL-PRODIVAWH1 or SZL-PROSKYWH-1 for integrated dimming.
The tape has a 100 degree beam spread, which helps create an even wash of light along counters, shelves, or display areas when mounted in continuous runs.
The Pro 1.5W LED Splash Proof Tape gives cabinet shops and electricians a 12 V, 3000K solution with 1.5 watts per 12 inch section, a 16.4 foot length, and cut points every 2 inches. The splash proof clear plastic covering, 100 degree beam spread, and 25,000 hour bulb life suit built-in undercabinet, display, and similar millwork applications. Pairing the tape with the specified 79 inch lead cord, dimmable drivers, or power supplies from the Pro Value Series lets you standardize components across projects. Use this tape when you need a defined, low-voltage LED strip that is sized and specified for repeat cabinet and display lighting layouts.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | SZL-PTCON-48IN-1 Mfr# L-PTCON-48IN-1 | R143 Linking Wire, 48", White |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RSL-DCE60D-CON-1 Mfr# L-DCE60D-CON-1 | 60W Hardwire Power Supply, 6-11/16", Black | ||||
Sold in: 1 Each | RSL-DCE30D-CON-1 Mfr# L-DCE30D-CON-1 | T611 30W Dimmable LED Power Supply with Mounting Block, 6-1/8", Black |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | SZL-PWIRE25-RB-1 Mfr# L-PWIRE25-RB-1 | 300" Roll 18 Gauge Linking Wire, Red/Black | ||||
Sold in: 1 Each | SZL-RNDTD-NI-1 Mfr# L-RNDTD-NI-1 | R152 60W Round Touch Dimmer, 2-3/8", Nickel | ||||
Sold in: 1 Each | SZL-ROTDIM-BL-1 Mfr# L-ROTDIM-BL-1 | Rotary Dimmer 48 Watts - Pro Value Series L-ROTDIM-BL-1 | ||||
Sold in: 1 Each | SZL-RNDDS-NI-1 Mfr# L-RNDDS-NI-1 | Door Sensor Switch 60 Watts, Round - Pro Value Series L-RNDDS-NI-1 |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | SZL-EXTCON-3IN-1 Mfr# L-EXTCON-3IN-1 | R157 Extension Cord, 3" | ||||
Sold in: 1 Each | SZL-EXTCON-48IN-1 Mfr# L-EXTCON-48IN-1 | R161 Extension Cord, 48" |