Pro 1.5W LED Splash Proof Tape Clear Plastic Covering Over the Tape - Pro Value Series L-PT15W-SP-5R-60

Pro 1.5W LED Splash Proof Tape Lighting

Pro 1.5W LED Splash Proof Tape is a 12V LED tape lighting run rated at 1.5 watts per 12 inches, so you get predictable light output per foot for planning even illumination along cabinets, displays, or work areas. The 5000K color temperature defines a neutral cool white appearance, which supports detailed work where color clarity and visibility matter. A clear plastic covering over the tape provides splash proof protection, which helps when lighting is routed near sinks, counters, or other areas where incidental moisture may occur. The tape length of 16.4 feet gives one continuous run for longer installations, reducing splices along toe kicks, shelves, or valances. A beam spread of 100 degrees projects light broadly from each section, which reduces hot spots and helps produce smoother, more uniform coverage on adjacent surfaces.

Key LED Tape Details For Project Planning

• The 1.5 watts per 12 inches rating defines power use per segment, which helps when sizing drivers and power supplies across the 16.4 foot run for dependable operation on larger cabinet or display layouts.
• The 12V requirement sets the low-voltage system this tape is designed for, which matters when coordinating with existing wiring, selecting matching drivers, and keeping runs consistent with typical undercabinet lighting setups.
• The 5000K color temperature pins down the light appearance as cool white, which helps align this tape with other task lighting where a similar tone is needed across a kitchen, shop, or commercial workspace.
• The 25,000 hour bulb life rating describes expected LED operating life, which supports long-term installations where frequent service interruptions on built-in cabinetry or millwork are difficult or costly.
• The 16.4 foot length, at 3/8 inch width and 5/64 inch height, describes a low-profile strip that fits into tight channels or under narrow lips while still covering extended cabinet or display runs in one continuous line.
• The tape can be cut every 2 inches, which allows sections to be trimmed to fit specific cabinet bays, shelving spans, or display niches while still following the manufacturer-defined cut marks.

LED Tape Fit, Cutting, And Power Components

This Pro Value Series LED tape has a size of 16.4 feet long by 3/8 inch wide by 5/64 inch high, so it tucks into shallow recesses and slim channels without significantly changing clearances around cabinet doors or drawers. The ability to cut the tape every 2 inches means runs can be tailored closely to cabinet widths or niche dimensions, limiting dark gaps or overhang segments at the ends. The tape operates on 12V, aligning with common low-voltage lighting layouts in woodworking and casework projects. A 79 inch lead cord, item SZL-PTPCL-79IN-1, is a required component for connecting the tape to the rest of the system, which centralizes the handoff from the strip to drivers or power supplies over a workable distance.

LED Tape Use Cases And System Configuration

Where This Pro Value Series LED Tape Fits Best

This LED tape belongs to the Pro Value Series LED Tape Lighting class, so it is suited to applications where continuous linear light is integrated into cabinetry, shelving, or architectural details. The splash proof design, achieved by the clear plastic covering over the tape, supports use around areas that may experience minor splashes, such as counters or display edges near sinks or drink stations. The 100 degree beam spread helps when the tape is mounted near the front of a cabinet or under a shelf, because the wide distribution sends light across both the back wall and work surface for more complete coverage. With a 16.4 foot length, one run can span multiple adjoining cabinets or a long display case, which is useful when designing straight, uninterrupted lines of light along upper or lower runs.

Why The Power And Control Details Matter

This LED tape requires 12V power and is rated at 1.5 watts per 12 inches, so calculating total load across the 16.4 foot length is straightforward when pairing it with a driver or power supply. When dimming from a wall dimmer, a dimmable driver is a required component, using item RSL-DCE30D-CON-1 or RSL-DCE60D-CON-1 together with SZL-PRODIVAWH1 or SZL-PROSKYWH-1OR, which defines a path for integrating line-voltage wall dimmer control into the low-voltage tape system. When the installation does not use a wall dimmer, a power supply is the required component, and can be matched with item SZL-PRO-15ELT-1, SZL-PRO-30ELT-1, or SZL-PRO-60ELT-1 depending on system design. The 25,000 hour bulb life rating supports long-term setups, reducing the frequency of servicing concealed runs behind finished panels. A 1 year warranty backs the tape, giving defined support parameters for projects that specify Pro Value Series lighting.

Common Questions About Pro 1.5W LED Tape Use

Selecting This LED Tape For Your Next Run

The Pro 1.5W LED Splash Proof Tape combines 12V operation, 1.5 watts per 12 inches, and a 5000K cool white output in a low-profile 16.4 foot strip, so it aligns well with cabinet, display, and millwork layouts. The clear plastic splash proof covering, 25,000 hour bulb life, and 100 degree beam spread support long-term, even illumination in demanding shop or commercial environments. With defined cut points every 2 inches and clearly specified lead cord, driver, and power supply components, this Pro Value Series tape is ready to be integrated into your next linear lighting run.