
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Clamex P-14 interlocking connector is a detachable Lamello P-System fitting designed for fast, form-locking joints in wood components. The connector uses a form-locking anchor that engages the P-System groove, creating a positive mechanical connection that resists pull-out in service. Each connector measures 64mm x 27mm x 9.7mm, giving installers a compact joint solution that still offers a substantial bearing surface across the joint. The connector is made from fiberglass reinforced plastic and die cast zinc, pairing a tough housing with a rigid locking element that supports repeatable assembly and disassembly. Because this Clamex P fastener is detachable, components can be separated again without cutting or destroying the joint. For shops producing cabinets, casework, or furniture, the fastener allows parts to ship flat and then assemble quickly at the destination, supporting efficient transport and on-site work.
The Clamex P-14 interlocking connector is part of the Lamello P-System, so installation relies on the correct P-System groove geometry for the form-locking anchor to seat. This system requires the P-System groove, which defines the unique undercut profile that the connector engages. The groove can be produced using the Zeta P2 cutter, which is designed to machine the P-System undercut in one pass to match the connector body. Alternatively, a CNC can machine the P-System groove, which lets production shops integrate Clamex P-14 into nested-based or point-to-point workflows. Because the connector installs in seconds without tools and does not require screws or glue, the workflow consists mainly of machining the groove, inserting the connector, and then drawing the parts together, which is efficient for batch runs and on-site assembly.
The Clamex P-14 interlocking connector is described as a Lamello P-System fitting in the Fasteners and Dowels & Biscuits category, so it functions in a role similar to a specialized biscuit for joining panel components. Its 64mm x 27mm x 9.7mm size makes it suitable wherever a slim, concealed connector is required along an edge or surface. Because it is detachable, it is well-suited to applications where furniture, casework, or other assemblies benefit from knock-down capability while still using precise machined grooves. The requirement for a P-System groove, produced with either a Zeta P2 cutter or a CNC, places this connector in professional or advanced shop environments where controlled machining is standard. In these settings, the form-locking anchor provides a consistent mechanical lock that can be repeated across many joints in a production run.
The Clamex P fastener operates as a form-locking anchor, so the connector engages the P-System groove profile rather than relying on friction, which helps deliver predictable alignment from one assembly to the next. Because it installs in seconds without tools, assembly time is driven more by machining quality than by hand operations, which suits production workflows. The construction from fiberglass reinforced plastic and die cast zinc means the housing and locking element are stable under repeated use, which supports multiple assembly and disassembly cycles without changing parts. Since the system does not require screws or glue for installation, joints reach their final holding condition as soon as the connector is engaged, which is useful when assembled units need to be handled, transported on site, or adjusted the same day. By allowing parts to ship flat and then assemble quickly at the end destination, the connector supports jobs where large components must travel through tight access or be staged before final installation.
The Clamex P-14 interlocking connector is a detachable Lamello P-System fitting that uses a form-locking anchor, providing a mechanical joint that can be opened and closed when assemblies need to be moved.
The Clamex P fastener installs in seconds without tools because it locks into the pre-machined P-System groove, so assembly relies on the groove geometry instead of on-site drilling or screw-driving.
The Clamex P-14 connector is made with fiberglass reinforced plastic and die cast zinc, combining a tough body with a rigid locking element for repeated joint engagement in wood components.
The Clamex P-14 requires the P-System groove because its form-locking anchor is shaped to engage that specific undercut profile, creating the positive mechanical lock that defines the system.
The P-System groove for Clamex P-14 can be achieved using the Zeta P2 cutter or a CNC, so both portable and CNC-based machining workflows can prepare the correct groove.
The Clamex P-14 connector measures 64mm x 27mm x 9.7mm, providing a low-profile, elongated connection area that fits well into panel edges or surfaces where space is limited.
The Clamex P-14 interlocking connector gives shops a detachable Lamello P-System fitting that installs in seconds without tools or glue, which supports fast assembly and rework when layouts change. Its fiberglass reinforced plastic and die cast zinc construction offers a robust, reusable connection around the P-System groove. For projects that benefit from parts shipping flat and assembling at the destination, this connector helps tie machining precision to on-site speed. Use this Clamex P fastener when a form-locking anchor and repeatable P-System groove installation align with your cabinet, furniture, or casework workflow.
Sold In: 1 Box