Clamex P-14 interlocking connector is a detachable furniture fitting based on the P-System anchorage, so installers get a repeatable connection designed for furniture assemblies. The connector uses a lever connection, which creates the mechanical engagement that holds the joint together in service. Its size of 64mm x 27mm x 9.7mm defines how it nests in the workpiece, helping layout and machining decisions on edge or panel joints. The form-locking P-System anchorage provides fast and powerful anchorage in the work piece without tools, which streamlines assembly steps at the bench or on site. Because Clamex P needs neither glue nor screw, it supports dry assembly workflows where clamping and curing time would slow production. The 6 mm openings for hexagonal keys provide access for actuation while keeping visible holes small on finished furniture surfaces.
The Clamex P detachable furniture fitting relies on the P-System anchorage in the work piece, so the connector locks into a form-fitting cavity rather than depending on loose fasteners. This form-locking anchorage creates the powerful hold that supports furniture assemblies under load. Extremely fast insertion of the connectors without tools helps speed production when multiple joints repeat along a cabinet run or shelving unit. Because Clamex P needs neither glue nor screw, the installer engages the lever connection to secure the joint instead of applying adhesive, which reduces cleanup around edges and corners. The small 6 mm openings for hexagonal keys give access to the lever mechanism, so tightening and releasing the connection stays controlled from the outside face. Versatility for all angles and joining situations supports angled, mitred, or straight joints using the same connector concept.
Clamex P-14 is described as a detachable furniture fitting, so it is oriented to furniture projects where components benefit from being assembled and taken apart. The ability to join either detachable or glued furniture mitres means the same connector concept can support knock-down joints or permanent mitred corners, depending on project requirements. Its classification under fasteners and biscuits shows that it functions in place of traditional wood biscuits or similar hidden joinery components in the panel edge. The form-locking P-System anchorage allows fast insertion into the work piece without tools, which is valuable when repetitive joints are required along cabinet carcasses, shelves, or furniture frames. Because Clamex P needs neither glue nor screw, the joint is established mechanically, which keeps joints dry during fitting and supports staged assembly approaches. Versatility for all angles and joining situations allows one connector style to be applied across varying casework geometries.
The P-System anchorage in Clamex P-14 creates a form-locking connection in a prepared cavity, so once the cavity is machined to the correct shape, the connector locates consistently from piece to piece. This consistency helps maintain alignment across cabinet runs and furniture assemblies where multiple joints must line up. The extremely fast insertion of the connectors without tools simplifies feeding parts through an assembly line or on-site fitup because each connector seats directly into the P-System anchorage. The lever used for connection provides a defined actuation step; engaging the lever draws the interlocking parts together within the work piece, which can help pull joints tight. The small 6 mm openings for hexagonal keys allow the lever to be operated from the outside, so joints can be tightened or released after the panels are positioned. Since Clamex P needs neither glue nor screw, installers avoid variations that come from adhesive quantity, curing conditions, or screw torque, which supports repeatable joint behavior over multiple builds.
Clamex P-14 is a detachable furniture fitting based on the P-System anchorage, so it functions as an interlocking connector for assembling furniture components.
The form-locking P-System anchorage creates fast and powerful anchorage in the work piece without tools, giving joints mechanical strength without separate fasteners.
Clamex P needs neither glue nor screw, so the lever connection provides the holding force, which keeps the workflow focused on mechanical engagement instead of adhesive curing.
Clamex P-14 uses a lever connected through small 6 mm openings for hexagonal keys, so the joint is engaged or released from the outside surface using the hex key.
Clamex P can serve to join either detachable or glued furniture mitres, supporting both knock-down joints and permanent corner assemblies.
Clamex P offers versatility for all angles and joining situations, so one connector style adapts to straight, angled, or mitred furniture joints.
Choosing the Lamello Clamex P-14 interlocking connector brings a detachable furniture fitting that relies on P-System anchorage and a lever connection to secure joints. Its glue-free and screw-free operation supports mechanical furniture assemblies where dry fitting, mitres, and varied angles are important. The small 6 mm hexagonal key openings offer discreet access for tightening or releasing joints after positioning. With its role as a fastener in the biscuits category, this connector gives woodworking professionals a precise, repeatable way to build furniture projects using mechanical engagement. Specify Clamex P-14 when a detachable furniture fitting with tool-free P-System anchorage aligns with the joining approach for your next build.
Sold In: 1 Box