Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
workstation bracket 15x21 primed pair describes a set of rigid, heavy duty Pro Value Series workstation and countertop brackets that support demanding surfaces in shops, garages, and stations. The 1,000 lb per pair load rating turns the 1/8 inch steel construction into dependable support for substantial countertops, benches, or storage shelves where deflection control matters. The 15x21 size matches the SAP description, so installers know they are working with the specified bracket footprint for layout and planning. Being part of the Workstation and Countertop Brackets product class connects these brackets directly to workbenches, workstations, garage storage, ADA stations, and computer stations, so the support role is clear before mounting holes are laid out. The primed finish on this size prepares the steel for topcoat finishing steps, which helps coordinate brackets with surrounding cabinetry or wall colors on the same job.
These workstation and countertop brackets use multiple mounting 1/4 inch hole locations to fasten to their supporting structure, so layout steps can be organized around predictable fastening points. The repeated hole pattern makes it straightforward to mark and drill into studs or framing behind drywall or sheathing while keeping each pair aligned. The 3 inch by 3 inch - 45 degree notch on the six larger sizes provides a defined space where a wall cleat and wire run can pass, which simplifies combining bracket support with a ledger or routed electrical path. Since these brackets are sold in pairs only, each planning step can be based on matched right and left pieces, which keeps bracket spacing and orientation consistent across a full run of supports.
These Pro Value Series workstation and countertop brackets are identified for use in workbenches, workstations, garage storage, ADA stations, and computer stations, so their role spans both residential and commercial-style layouts. In a workbench or workstation, the 1,000 lb per pair load rating supports dense tools or equipment across a supported span, which lets fabricators and installers design deeper tops without shifting to floor legs at every position. In garage storage, the same rating and 1/8 inch steel construction let these brackets carry heavy bins or supplies, so wall space can be converted into robust shelving. For ADA stations and computer stations, the rigid support from 1/8 inch steel helps maintain stable surfaces at set heights, which matters when clearances and reach ranges are planned around the bracket geometry.
The workstation bracket 15x21 primed pair designation and Manufacturer Part # 2/PK 72531 76 114 give installers a specific reference when matching to drawings or replacing existing supports, so repeat work on similar stations stays consistent. The reversible design makes the brackets versatile and easy to use, because a single bracket profile can serve as either a right or left when oriented appropriately, simplifying planning for mirrored layouts on both sides of a workstation or computer station. Packaged in equal quantities of rights and lefts means that bracket runs can be designed so each side of a surface uses a mirrored pair, keeping load paths and aesthetics balanced along the installation. The 3 inch by 3 inch - 45 degree notch on the six larger sizes creates a repeatable clearance profile for a wall cleat and wire run, so once one station is laid out successfully, the same measurements can be reused on additional workbenches or garage storage runs. Stainless steel bracket options, described as genuine 304 series stainless steel with a natural brushed finish and 12 gauge non-magnetic construction in sizes listed below, provide an alternate material choice within the same family when jobs call for that specification.
These Pro Value Series workstation and countertop brackets have a load rating of 1,000 lb per pair, so each matched pair can support substantial countertops, benches, or shelves in workbench and workstation layouts.
The multiple mounting 1/4 inch hole locations give several fastening options, so brackets can be aligned with studs or other structure while distributing load across more fasteners.
The 3 inch by 3 inch - 45 degree notch on the six larger sizes allows clearance for a wall cleat and wire run, so structural ledgers and electrical paths can share the same wall area.
These brackets are described for use in workbenches, workstations, garage storage, ADA stations, and computer stations, so they cover a range of shop and storage applications.
The brackets use 1/8 inch steel and are available in four colors: Black, White, Almond, and Gray. Stainless steel versions in genuine 304 series with natural brushed finish are also described.
The reversible design is packaged in equal quantities of rights and lefts, so mirrored bracket layouts can be built with paired supports on each side of a surface.
The 1000 lb per pair workstation bracket rating, 1/8 inch steel construction, and 15x21 primed pair sizing position this Pro Value Series part for demanding workbench, workstation, garage storage, ADA station, and computer station projects. The multiple mounting 1/4 inch hole locations and reversible design simplify layout around existing framing or wiring, while the 3 inch by 3 inch - 45 degree notch on the six larger sizes supports coordinated wall cleat and wire runs. Pair these job-focused details with the four available colors or related stainless steel options to match structural and visual requirements across similar installations.
Sold In: 1 Pair
