24" x 29" Heavy Duty Workstation Bracket, White Finish (1 Pair)

24 x 29 Heavy Duty Workstation Bracket Use

24 x 29 heavy duty workstation bracket describes a Pro Value Series steel support that carries a load rating of 1,000 lb per pair, so it handles substantial countertop, bench, or station loads in typical workbench, workstation, or storage layouts. The white finish provides a clean look that blends into many shop, office, or residential work areas where appearance matters alongside strength. The bracket is classified under workstation and countertop brackets, so it is intended to support horizontal surfaces rather than light shelving. The 1/8 inch steel construction gives a solid structural section for jobs where long-term support of heavy materials, tools, or equipment is expected. This model is sold as a pair, which aligns directly with the 1,000 lb per pair rating so capacity planning can be based on known, tested performance across each installed set.

Workstation Bracket Details That Support Jobs

• 1,000 lb per pair load rating lets the bracket support heavy workbenches, workstations, and similar surfaces, so installers can plan for demanding loads in garages, shops, or commercial stations without oversizing the bracket type.
• 1/8 inch steel construction creates a rigid support arm, so countertops or benches stay stable under use in workbenches, ADA stations, computer stations, and other frequently used installations.
• White finish gives the bracket a neutral appearance, so it fits cleanly under counters or along walls in office, residential, or storage areas where visible hardware needs to be unobtrusive.
• Multiple mounting 1/4 inch hole locations allow flexible positioning on wall framing and the supported surface, so installers can line up fasteners with structure and layout requirements more easily.
• Reversible design lets the same bracket pair work in either orientation, so installers can adapt to wall or layout constraints without switching to a different model or part number.
• Packaged in equal quantities of rights and lefts provides matched opposing supports, so each side of a workstation or countertop can be built symmetrically from the same product line.

Mounting And Bracket Layout For Stable Surfaces

This workstation and countertop bracket uses multiple mounting 1/4 inch hole locations, which gives several possible fastener positions into wall structure and into the supported top, helping the installer tie into studs, wall cleats, or other framing. The six larger sizes in the series have a 3 inch by 3 inch, 45 degree notch for wall cleat and wire run clearance, so when those sizes are selected the cleat or conduit can pass through the notch instead of forcing a layout change. The reversible design means each bracket can be oriented to suit the wall conditions while still keeping the 24 inch by 29 inch geometry, which matters when aligning several brackets in a run of workstations or counters.

Workstation Bracket Performance In Real Applications

Where This Workstation Bracket Is Applied

The Pro Value Series workstation bracket is described for use in workbenches, workstations, garage storage, ADA stations, and computer stations, so it is intended for environments ranging from residential garages to commercial or institutional setups. In workbenches and workstations, the 1,000 lb per pair load rating supports tools or equipment concentrated along the counter span, which is important where point loads such as vises or machines are present. In garage storage applications, the same rating supports heavy totes or supplies along wall-mounted counters. In ADA stations and computer stations, the bracket supports work surfaces while leaving space below, which matters where under-counter clearance is part of the station design.

Why These Bracket Details Support Repeatable Results

The reversible design of this 24 inch by 29 inch heavy duty workstation bracket makes the brackets versatile and easy to use, because one part can be flipped to function on either side of a run, simplifying layout and part stocking across multiple projects. Multiple mounting 1/4 inch hole locations help achieve consistent alignment from station to station, because the installer can use common reference points on the bracket while still hitting structure with fasteners. The 3 inch by 3 inch, 45 degree notch on the six larger sizes in the series allows clearance for wall cleats and wire runs, so when those sizes are used on a project, electrical or support cleats can pass through the same vertical plane rather than forcing offsets. Stainless steel brackets in the same product series are genuine 304 series stainless steel with a natural brushed finish, 12 gauge, non-magnetic, which provides an option in environments where stainless construction and that finish are preferred while keeping a similar functional role.

Common Questions About This Workstation Bracket

Select This Bracket For Demanding Work Surfaces

The 24 x 29 heavy duty workstation bracket from the Pro Value Series combines a 1,000 lb per pair load rating with 1/8 inch steel construction, making it suited to substantial workbenches and counters. Its white finish supports clean-looking garage storage, ADA stations, and computer stations, while multiple mounting 1/4 inch hole locations and a reversible design support straightforward layout across runs of stations. For workstation and countertop projects that match these described uses, this bracket offers a defined structural role and appearance.