24" x 29" Heavy Duty Workstation Bracket, Gray Finish (1 Pair)

24 x 29 Heavy Duty Workstation Bracket Use

24 x 29 heavy duty workstation bracket describes a Pro Value Series steel support that carries work surfaces, so a single pair can hold substantial workstation, counter, or shelf loads without relying on additional support structures.

The 1/8 inch steel construction provides a solid, rigid arm, which helps workbenches and counters stay stable under tools, equipment, or storage bins during regular use.

A gray finish identifies this version for projects where a neutral, utility appearance suits garage storage, workstations, or shop counters, helping it blend with common shop colors and other gray-framed systems.

This product is classified as workstation and countertop brackets, so it is intended to support horizontal surfaces in workbenches, ADA stations, computer stations, and similar task areas that need dependable structural support.

The product is sold as a pair, so every purchase provides matched supports for a single span, which simplifies planning for workbench or counter layouts that are built around paired bracket spacing.

The manufacturer part number 2/PK 72531 86 163 identifies this specific 24 x 29 gray model, allowing straightforward reordering when adding more matching stations within the same shop or facility.

Key Workstation Bracket Details For Projects

• A load rating at 1,000 lb per pair means a properly supported work surface can carry very heavy items, which matters when building workbenches, garage storage, or ADA and computer stations that routinely see demanding loads.
• The 1/8 inch steel material resists bending under typical countertop or bench span loads, helping the bracket keep surfaces level across the run and reducing flex that can affect tools, fixtures, or stored items.
• Multiple mounting 1/4 inch hole locations give several fastening points along the bracket, allowing installers to place fasteners where wall framing or substrate is strongest, which supports secure anchoring for loaded stations.
• The reversible design lets the bracket be installed in either orientation, providing flexibility when working around wall obstructions, cleats, or wire paths while still using the same part across different station layouts.
• The six larger sizes have a 3 x 3 - 45 degree notch that allows wall cleat and wire run clearance, so cleats or conduit can pass through that zone instead of forcing the bracket to shift off the preferred mounting position.
• Availability in four colors - Black, White, Almond, and Gray - lets projects match bracket color to surrounding cabinetry, shelving, or equipment finishes, keeping a consistent look across workbenches and storage runs.

Mounting And Layout Details For This Bracket

Multiple mounting 1/4 inch hole locations along the bracket arm and vertical leg provide preset fastening points, so installers can align screws with framing or backing without drilling the steel, which saves setup time on repetitive station builds.

The 3 x 3 - 45 degree notch on the six larger sizes creates a fixed clearance zone near the corner, letting a wall cleat or wire run pass through the bracket footprint, which simplifies combining structural cleats with cable routing.

The reversible design means the same bracket can be flipped to orient that notched area or arm in the most convenient direction, helping layouts adapt to left-hand or right-hand obstacles while keeping a consistent part number throughout the project.

The 24 x 29 inch size defines the bracket projection and rise, so installers can plan bench depth and vertical leg length around this geometry, coordinating with cabinet depths, ADA clearances, or equipment footprints that rely on a fixed work surface dimension.

Using Pro Value Workstation Brackets In Real Jobs

Where This Workstation Bracket Is Applied

The web description notes use in workbenches, workstations, garage storage, ADA stations, and computer stations, so this 24 x 29 heavy duty workstation bracket suits a range of horizontal work surfaces in shops, garages, and commercial environments.

The 1,000 lb per pair load rating supports heavy bench tops used for assembly, repair, or tool staging, allowing solid-core tops or dense materials without overloading the bracket pair in typical span configurations.

For garage storage, the 1/8 inch steel arms carry deep shelves or countertops that hold bins, toolboxes, or supplies, so the bracket can support storage zones that sit under or beside larger workbench surfaces.

ADA stations benefit from the bracketed support because the open underside around the 24 x 29 geometry can be used to maintain knee and toe clearance while still providing the load rating needed for accessible counters and equipment stations.

Computer stations can use the same bracket type to carry wide tops that hold monitors and peripherals, and the 3 x 3 - 45 degree notch on larger sizes offers a fixed path for cable runs alongside any wall cleats supporting the station.

The Pro Value Series branding ties this workstation and countertop bracket into a broader family within Wurth Baer Supply, which helps standardize support hardware across different bench types, storage runs, and technical stations within one facility.

Details That Support Consistent Installation Results

The load rating at 1,000 lb per pair provides a clear design capacity, so planners can size spans and choose top materials knowing what each pair of brackets is intended to support in steady service.

The 1/8 inch steel construction gives each bracket a predictable stiffness, which helps maintain level work surfaces across multiple brackets, reducing alignment issues when joining long countertops or bench runs.

Multiple mounting 1/4 inch hole locations along the bracket mean every installation follows a repeatable screw pattern, which aids consistency between stations and speeds layout when marking walls or backing.

The reversible design ensures that left-hand and right-hand positions use the same part, simplifying inventory and allowing installers to rotate a bracket in the field when clearances or conduit runs differ from the plan.

The 3 x 3 - 45 degree notch on the six larger sizes defines a standard clearance cutout, so electricians and carpenters can coordinate that space for wall cleats or wire runs without custom cutting steel or shifting bracket spacing.

The availability of four finishes - Black, White, Almond, and Gray - allows visual standardization across a project, so new stations can match existing colors when expanding workbenches, garage storage rows, or computer work areas.

Packaged in equal quantities of rights and lefts ensures that a pair-based layout always has a balanced set of orientations, which is useful when bracketing both sides of a work surface or repeating mirrored stations along a wall.

The classification as workstation and countertop brackets signals that these supports are intended for fixed, horizontal surfaces, guiding their use toward stable benches and counters rather than lighter-duty shelving roles.

Buyer Questions On This Workstation Bracket

Choose This Bracket For Heavy Work Surfaces

The 24 x 29 heavy duty workstation bracket in gray from the Pro Value Series combines a 1,000 lb per pair rating with 1/8 inch steel arms and multiple 1/4 inch mounting hole locations, giving installers a strong support option for demanding work surfaces.

With use documented across workbenches, workstations, garage storage, ADA stations, and computer stations, this workstation and countertop bracket suits projects that need consistent, steel-based support geometry.

The reversible design, 3 x 3 - 45 degree notch on the six larger sizes, and four available colors provide flexible layout and appearance choices, making this bracket a practical selection when planning heavy-duty benches and counters.