Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
12 x 12 gray concealed bracket gives a 12 inch by 12 inch support footprint in a low-visibility form, so shelving, workstations, or countertops sit on solid steel structure while keeping hardware out of sight. Pro Value Series classification ties this bracket into a workstation and countertop bracket family, which helps align it with shop benches, utility tops, or heavy-duty shelves where consistent hardware choices matter across a project. The gray finish adds a neutral appearance that blends into many wall or cabinet layouts, which keeps the focus on the surface instead of the support. Manufacturer part B08-0CH12-GK4 identifies this exact configuration for repeat orders, so replacements or additional locations can match previous installs. Workstation and countertop brackets category placement connects this part directly to serious load-bearing tasks, so it fits situations where structural support is a primary requirement.
Mounts directly to wall studs means this bracket is intended to fasten into framing members, so layout work centers on locating stud positions before setting bracket spacing. 3/8 inch by 4 inch carriage bolts used with hex nuts and flat washers provide a through-bolt style connection, so the installer drills matching holes and clamps the bracket tightly to the stud for a solid seat. Load limit over 1,000 lb per pair gives a clear capacity reference, so the number of brackets across a run can be planned to match anticipated weight from tops, equipment, or stored material. The 12 inch by 12 inch size lets the horizontal leg reach under common countertop and shelf depths, while the vertical leg aligns along the stud face, which helps keep layout straightforward in typical framed walls.
Workstation and countertop brackets classification places this 12 x 12 gray concealed bracket squarely in heavy-use environments, so it suits shop benches, utility counters, or garage work surfaces that see significant static loads. Load limit over 1,000 lb per pair signals that properly spaced pairs can support dense materials or equipment, which matters when planning long runs of shelving or continuous tops. Mounts directly to wall studs ties the support into structural framing, so the bracket can serve as the primary support for wall-hung work surfaces rather than light-duty secondary bracing. The 1/4 inch steel material gives each arm a substantial cross-section, which helps when long-term deflection control is important under heavy stored items or thick tops. Available gray finish provides a neutral, professional appearance, so the bracket can work in both residential storage areas and light commercial workrooms.
All welds on reverse for easy, clean install means the visible faces of the bracket arrive free from exposed weld beads, so the installer can mount and paint or touch up with minimal surface preparation. 3/8 inch by 4 inch carriage bolts, used with hex nuts and flat washers, form a consistent fastening set, so each bracket in a run locks to the studs in the same way, which aids repeatability of alignment. Mounts directly to wall studs keeps the installation sequence simple: locate studs, mark vertical centers, drill for the 3/8 inch bolts, then set brackets in a straight line for leveling the top. The 12 inch by 12 inch geometry gives predictable projection and height, so multiple brackets can be laid out at equal spacing while maintaining a continuous support plane for countertops or shelves. Load limit over 1,000 lb per pair provides a clear engineering-style figure, so field layouts can be standardized once a spacing pattern proves effective for a given type of surface.
The 12 x 12 gray concealed bracket uses 1/4 inch steel, which provides a thick section that resists bending and helps support heavy countertops or shelves in workstation layouts.
The concealed bracket mounts directly to wall studs, so the vertical leg fastens into framing members and transfers shelf or countertop loads into the wall structure.
The bracket uses 3/8 inch by 4 inch carriage bolts with hex nuts and flat washers, creating a through-bolted connection that clamps the bracket securely to the stud.
A pair of these concealed brackets has a load limit over 1,000 lb, which supports planning for heavy work surfaces or dense shelving when spacing brackets along a wall.
The welds are on the reverse side, so the exposed faces stay smooth, which helps achieve a clean appearance and reduces finish work after the brackets are mounted.
This 12 x 12 gray concealed bracket is identified by manufacturer part number B08-0CH12-GK4, which simplifies reordering or matching brackets across additional installations.
The 12 x 12 gray concealed bracket from the Pro Value Series combines 1/4 inch steel construction with a load limit over 1,000 lb per pair, so it suits demanding workstation and countertop projects. Mounting directly to wall studs with 3/8 inch by 4 inch carriage bolts, hex nuts, and flat washers gives each bracket a solid structural connection for deep shelves or work surfaces. All welds on the reverse help deliver a clean, professional face on exposed installations, while the gray finish works well in many shop or storage settings. When a project calls for concealed-style support with heavy load capacity, this B08-0CH12-GK4 bracket offers a consistent specification to build around.
Sold In: 2 Each
