Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
18 inch concealed bracket black gives you a hidden steel support for shelves, workstations, or countertops where an open bracket would get in the way. The Pro Value Series design uses 1/4 inch steel, so the arm resists flexing under substantial static loads. The manufacturer rates the load limit over 1,000 lb per pair, which supports heavy counters or deep work surfaces when laid out correctly. An upper extension above the support arm is built into the bracket, so vertical forces are transferred higher into the structure. That geometry increases overall strength in service. All welds are positioned on the reverse side, so the visible face stays smooth once installed against the shelf or deck. That clean side helps finished projects look more like solid floating surfaces instead of bracketed frames.
This Pro Value Series concealed bracket ships with 3/8 inch by 4 inch carriage bolts, hex nuts, and flat washers, so the fastening system is sized to match the bracket rating. The 3/8 inch diameter bolt engages substantial material, helping clamp the steel against studs or structural framing. At 4 inches long, each bolt can pass through the bracket and typical framing thickness to secure from the back side. The carriage bolt head seats into the bracket hole, resisting spin as the hex nut is tightened. Flat washers spread the clamp load, so the high load limit over 1,000 lb per pair is supported by firm contact between bracket and structure. This hardware combination supports a straightforward through-bolt installation workflow in wood-based framing.
This 18 inch concealed bracket black is classified under shelf, closet, and garage organization, as well as shelving and accessories, so it fits naturally into storage and workstation builds. As a workstation and countertop bracket, it is sized for applications where a robust steel arm must sit largely out of sight under a work surface. The 1/4 inch steel section handles concentrated loads often found on benches or shop counters. In closet or garage installations, the concealed form keeps the support tight to the structure while the span carries containers or tools. The black finish lets it recede under dark tops or cabinets, supporting functional layouts without drawing attention to the structure. Paired left-handed and right-handed brackets help support both sides of a work surface or shelf, creating symmetrical support across the width.
The Pro Value Series design with upper extension above the support arm means vertical load is tied deeper into the mounting surface, which supports repeatable performance across multiple installs. Over 1,000 lb per pair load limit gives a clear planning value, so spans can be laid out with a defined capacity when using these brackets in series. All welds placed on the reverse side keep the visible face flat, which helps surfaces sit tight against the steel without rocking. The 3/8 inch by 4 inch carriage bolts, hex nuts, and flat washers create a consistent bolting pattern, so installers can repeat the same drilling and tightening routine across jobs. Being part of the workstation and countertop brackets product class, this bracket is suited to builds where solid-feeling surfaces are important for daily work, while the concealed form maintains an uncluttered underside.
The 18 inch concealed bracket uses 1/4 inch steel, which provides a thick, rigid support arm for shelves, workstations, or countertops that see high static loads in regular use.
The concealed bracket has a load limit over 1,000 lb per pair, giving capacity for heavy countertops, tools, or storage loads when the brackets are mounted into solid structural framing.
The bracket uses an upper extension above the support arm to transfer load higher into the structure, increasing strength and helping counters and shelves feel solid under weight.
The 3/8 inch by 4 inch carriage bolts, hex nuts, and flat washers clamp the 1/4 inch steel bracket to framing, so the connection can support the high rated load per pair.
The bracket has all welds on the reverse so the exposed face stays smooth, allowing tight contact with shelves or countertops and a cleaner finished underside appearance.
This workstation and countertop bracket suits shelf, closet, and garage organization projects where a concealed 18 inch support with over 1,000 lb per pair rating is required.
The Pro Value Series 18 inch concealed bracket black offers 1/4 inch steel construction, an upper extension above the support arm, and a load limit over 1,000 lb per pair. For shelf, closet, garage, or workstation layouts that demand concealed strength, this bracket and its matched left and right configuration provide a defined structural solution. Use its rated capacity, reverse-side welds, and supplied 3/8 inch by 4 inch carriage bolts, hex nuts, and flat washers to plan sturdy, visually clean support in your next countertop or shelving run.
Sold In: 2 Each
