Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
24 inch almond concealed bracket is a 1/4 inch steel workstation and countertop bracket from the Pro Value Series that supports heavy shelving or tops while staying hidden. The 24 inch length gives substantial support area, which helps distribute weight along the wall for a solid feel under load. The almond finish provides a light, neutral color option that blends with many closet, garage, or workstation schemes, keeping the support visually quiet. As a workhorse in the Workstation and Countertop Brackets class, this bracket is suited to jobs where strength and a concealed support layout are both important. The concealed design keeps welds on the reverse, so the visible side stays clean when the installation is complete.
This concealed bracket mounts directly to wall studs, giving a solid structural connection for workstations, shelving, or countertops. Direct stud mounting ties the 1/4 inch steel bracket to the framing, which improves load transfer and reduces deflection compared to non-structural mounting points. The bracket is designed to work with 3/8 inch x 4 inch carriage bolts, hex nuts, and flat washers, so the through-bolt connection clamps the steel tightly to the stud. That fastener interface helps keep the bracket firmly seated under load, which matters when supporting spans that approach the over 1,000 lb per pair rating.
This Pro Value Series concealed bracket is classified under Workstation and Countertop Brackets, so it is suited to fixed installations supporting tops or shelves. The 24 inch length gives reach under deeper work surfaces, which is useful for garage benches or utility counters that need support further from the wall. In closet or garage organization layouts, the almond finish offers a softer tone compared to black or gray, which can help match lighter panels or walls while still using the same structural system. Because the bracket mounts directly to wall studs, it serves best where framing is accessible, such as exposed stud walls, finished walls with known stud locations, or new-build installations. The concealed format keeps the supporting steel largely out of sight once tops or shelves are fitted over it, which maintains a clear underside for working or storage.
The 1/4 inch steel material provides a consistent, known thickness, which helps installers plan bracket spacing for predictable performance across a run of workstations or shelves. All welds located on the reverse side mean the face remains flat for tight contact with mating surfaces, which supports accurate alignment along a wall. Using 3/8 inch x 4 inch carriage bolts, hex nuts, and flat washers creates a through-bolted connection that resists pull-out, giving more confidence when loads approach the over 1,000 lb per pair rating. Mounting directly to wall studs simplifies layout decisions, since each bracket registers to structural framing rather than relying on hollow-wall fasteners. The combination of stud-mounted installation, heavy 1/4 inch steel, and concealed welds helps produce repeatable, clean-looking results across multiple stations or bays in the same project.
The concealed bracket is categorized as a Workstation and Countertop Bracket, so it suits fixed tops, benches, and shelving where hidden support and high load capacity are needed.
Mounting the bracket directly to wall studs ties loads into the framing, which improves structural support and helps the pair achieve its over 1,000 lb load rating.
The over 1,000 lb per pair load limit means properly installed pairs can support very heavy static loads, important for dense storage or thick worktops.
All welds on the reverse keep the visible face smooth, which helps finished countertops or shelves sit flat and preserves a clean underside appearance.
The bracket is specified to work with 3/8 inch x 4 inch carriage bolts, hex nuts, and flat washers, creating a clamped connection between bracket and stud.
The almond finish offers a light, neutral tone among the four color options, helping coordinate with lighter walls or shelving in closets, garages, or work areas.
The B08-0CH24-7K4 concealed bracket pairs 1/4 inch steel construction with a 24 inch reach and an over 1,000 lb per pair load limit, giving solid support for workstations, shelving, or countertops. With direct wall-stud mounting, 3/8 inch x 4 inch carriage bolt connections, and all welds on the reverse, it delivers a concealed, clean-faced bracket ready for demanding projects where strength and a hidden support layout are both priorities.
Sold In: 2 Each
