
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
9 inch extended concealed bracket from the Pro Value Series is a workstation and countertop bracket designed to carry substantial loads while staying out of sight. The bracket is made from 1/4 inch steel, so the support arm resists bending under demanding shelf, counter, or work surface applications. An upper extension above the support arm adds extra bearing area, which helps transfer load back to the structure for stronger support. All welds are placed on the reverse side of the bracket, keeping the visible face cleaner for jobs where appearance matters alongside strength. The white finish allows the bracket to blend with light-colored walls, casework, or closet systems, so the focus stays on the surface, not the support.
The Pro Value Series concealed bracket is supplied with 3/8 inch by 4 inch carriage bolts, hex nuts, and flat washers, so the mounting interface is based on through-bolted steel hardware rather than light anchors. This bolt size and length allow the bracket to be drawn tightly against supporting structure, helping the 1/4 inch steel section and upper extension work together to carry over 1,000 lb per pair when correctly paired with suitable framing. With welds located on the reverse, the installer works with a smooth front edge while the structural joints remain protected on the hidden side.
This white extended concealed bracket belongs to the Workstation and Countertop Brackets group, placing it in projects that call for strong support under counters, benches, or deep shelving. The 9 inch extension length suits surfaces that require substantial projection while still keeping the supporting steel tucked back from the edge for a cleaner look. Because the load capacity is over 1,000 lb per pair, the bracket pairs are suited to installations that must carry heavy materials or equipment on the supported surface. The white finish helps the bracket disappear under light-colored tops, so it works well in closets, offices, and utility spaces where a bright, neutral support is preferred.
The 1/4 inch steel construction of this bracket provides a consistent, predictable stiffness from one installation to the next, reducing unwanted flex in worktops and shelves. The upper extension above the support arm gives the bracket additional bearing height against the mounting surface, which helps distribute load and supports repeatable strength performance across multiple brackets along a run. By placing all welds on the reverse side, the manufacturer keeps the front face smooth, which simplifies layout lines and alignment along finished walls or cabinets. The specified load limit of over 1,000 lb per pair sets a clear performance expectation when bracket pairs are used as part of a structural support layout. The supplied 3/8 inch by 4 inch carriage bolts, hex nuts, and flat washers create a standardized bolting method, which promotes consistent clamping force and bracket alignment across similar installations.
The 9 inch extended concealed bracket is made from 1/4 inch steel, which provides a rigid support arm for workstation, countertop, or shelving loads that demand strong structural support.
The Pro Value Series concealed bracket has a load limit over 1,000 lb per pair, so bracket pairs can support heavy countertops, work surfaces, or shelves in demanding applications.
This workstation and countertop bracket has a white finish, allowing it to blend with white walls, cabinetry, or closet systems where a low-visibility support is preferred.
The upper extension above the support arm increases bearing height against the structure, improving strength when supporting heavy counters or shelves along the wall.
All welds on the reverse side keep the visible face smooth, which helps achieve a cleaner appearance and easier visual alignment in finished interior installations.
This concealed bracket uses 3/8 inch by 4 inch carriage bolts with hex nuts and flat washers, creating a strong through-bolted connection to suitable supporting structure.
The 9 inch extended concealed bracket from the Pro Value Series combines 1/4 inch steel, an upper extension above the support arm, and a load limit over 1,000 lb per pair to handle demanding workstation and countertop jobs. The white finish suits light interiors, while reverse-side welds keep the visible face clean for finished spaces. When a project calls for a concealed support that pairs strong through-bolted mounting with a discreet appearance, this 9 inch extended concealed bracket delivers a straightforward solution.
Sold In: 2 Each