
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
concealed bracket with upper extension almond describes a concealed support built from 1/4 inch steel that carries shelving and countertop loads while staying out of sight, which helps create clean workstations and counters with structure hidden behind the surface. This bracket belongs to the Pro Value Series workstation and countertop brackets, so it is intended for shelving, closet, garage, and countertop organization where reliable support is a priority. The bracket is finished in an almond color, giving installers a neutral tone that blends with many laminate, painted, or light wood surfaces for a coordinated appearance. The design is classified as a concealed bracket, which means the visible hardware is minimized along the run, supporting projects where open metal arms would conflict with the desired look. Because all welds are located on the reverse side, the visible face remains smooth, helping finished jobs present as continuous, uninterrupted support rather than exposed weld points.
This workstation and countertop bracket uses a concealed support layout, so the steel structure tucks behind shelving or countertops to keep the face line clear while still carrying load. The bracket uses 3/8 inch by 4 inch carriage bolts, together with hex nuts and flat washers, providing a through-bolted connection that clamps the steel firmly, which helps resist loosening under repeated load cycles. All welds are placed on the reverse side of the bracket, so the installer can orient the smooth face outward for a clean presentation without grinding or additional finishing. The load rating of over 1,000 lb per pair means bracket placement can be planned for heavy-span applications where countertops, benches, or storage shelves must hold significant weight along the wall. The product belongs to the Workstation and Countertop Brackets class, aligning its installation with fixed, wall-mounted support layouts typical in shop and residential work areas.
This bracket is listed under Shelf, Closet & Garage Organization and Shelving & Accessories, so it is intended for runs of shelving and counters in storage and work areas where vertical loads can be substantial. The 1/4 inch steel construction gives each support the stiffness needed for workstations and countertops, so heavy materials can rest on the surface without the arm flexing excessively. The almond finish offers a light, neutral tone that coordinates with common closet panels, garage cabinetry, and light counters, helping the metal blend with surrounding components. With a stated load limit over 1,000 lb per pair, this Pro Value Series concealed bracket fits heavy-duty environments such as tool benches or deep storage shelves that must carry dense items along the wall. The concealed configuration supports layouts where the visual line below the shelf or countertop needs to stay clear while still depending on robust steel to transfer weight into the structure.
The upper extension above the support arm adds a vertical segment that braces the main arm from above, which helps reduce twisting or sagging when countertops or shelves are heavily loaded. Because all welds are located on the reverse side, the outward-facing edges remain smooth, decreasing finishing steps during repeat installations across multiple stations. The 3/8 inch by 4 inch carriage bolts, paired with hex nuts and flat washers, create a stable clamping system, so loads are distributed across the contact points rather than concentrating on a single area. As part of the Pro Value Series workstation and countertop brackets, this concealed unit can be specified by Manufacturer Part # B08-ECH09-7K4, allowing installers to standardize on one configuration when building out rows of benches or shelves. The combination of concealed layout, upper extension strength, and over 1,000 lb per pair capacity supports consistent performance from job to job in similar wall conditions.
The bracket is categorized under Shelf, Closet & Garage Organization and Workstation and Countertop Brackets, so it is suited to shelving, closets, garages, and counters that require strong wall-mounted support.
The Pro Value Series concealed bracket has a stated load limit of over 1,000 lb per pair, which supports heavy shelving or countertop applications where substantial weight is expected along the span.
The concealed bracket is made from 1/4 inch steel, providing a rigid structure that resists bending under load in workstation, closet, or garage shelving installations.
The upper extension above the support arm provides superior strength by adding extra bracing, helping the bracket handle higher loads and reducing arm deflection in service.
All welds are on the reverse side so the visible face stays smooth, helping installers present a clean, finished look on exposed shelving or countertop runs.
This concealed bracket uses 3/8 inch by 4 inch carriage bolts with hex nuts and flat washers, forming a secure through-bolted connection for workstation and countertop support.
The Pro Value Series concealed bracket with upper extension in almond combines 1/4 inch steel construction with a load limit over 1,000 lb per pair, delivering concealed support for shelving, closets, garages, and countertops. The upper extension above the support arm and reverse-side welds contribute to both strength and a smooth visible face, which helps finished projects present clean lines while still depending on robust steel structure. With defined fasteners using 3/8 inch by 4 inch carriage bolts, hex nuts, and flat washers, this workstation and countertop bracket offers a repeatable configuration for runs of heavy-duty shelving and counters. Specify Manufacturer Part # B08-ECH09-7K4 when a concealed almond support is required for demanding wall-mounted storage or work surfaces.
Sold In: 2 Each