Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
18 inch extended concealed bracket from the Pro Value Series uses 1/4 inch steel to create a rigid support arm, which helps carry substantial loads in workstation, countertop, shelving, closet, or garage applications where strength is critical. The black finish provides a dark, low-visibility appearance, which helps the bracket blend beneath tops or against darker surfaces for a cleaner finished look in exposed installations. An upper extension above the support arm increases the vertical bearing surface, which helps transfer load into the structure and supports heavy tops with less flex under weight. All welds are located on the reverse side, which creates a smooth face on the visible side of the bracket and helps produce a clean, professional installation when the bracket is exposed below a surface. Rated load limit is over 1,000 lb per pair, which supports demanding projects that require substantial capacity.
The bracket uses 3/8 inch by 4 inch carriage bolts, hex nuts, and flat washers for mounting, which creates a through-bolted connection that tightens against the structure for secure clamping. Carriage bolts provide a square shoulder under the head, which helps resist rotation while tightening and simplifies assembly from one side during installation. The 4 inch bolt length offers reach through typical structural members, which supports mounting to framing, supports, or similar substrates with room for washers and nuts. With all welds on the reverse, the installer works with a flat front surface against the supported top, which reduces irregular contact points and helps the bracket sit flush to the underside for consistent bearing.
This workstation and countertop bracket is positioned for shelf, closet, and garage organization, which aligns it with storage runs and utility work areas that need strong concealed support. The extended 18 inch reach suits deeper countertops or work surfaces, which helps carry the load closer to the front edge and supports stable use along the full depth. Over 1,000 lb per pair of load capacity supports heavy-duty layouts, which is useful where tools, materials, or dense stored items concentrate weight in specific areas. The upper extension above the support arm provides superior strength by increasing vertical engagement, which supports installation against studs, rails, or structural members while keeping the support largely hidden under the surface. The black finish fits many garage and shop environments, which coordinates with darker cabinetry or frames commonly used in utility spaces.
The 1/4 inch steel bracket body provides a robust base for welding, which helps the upper extension and arm behave as a single, solid component under load. Keeping all welds on the reverse side contributes to visual quality, which supports open installations where underside details remain visible to end users. The concealed style of the bracket supports tops and shelves from beneath without front obstructions, which helps maintain clear knee space at workstations or open access on shelving. The rated load limit over 1,000 lb per pair provides a clear capacity benchmark, which supports planning bracket spacing along a run so the structure matches expected loading patterns. Mounting with 3/8 inch by 4 inch carriage bolts, hex nuts, and flat washers creates a repeatable fastening method, which supports consistent clamp force and alignment across multiple brackets on the same project. The Pro Value Series designation connects this part to a focused line of workstation and countertop brackets, which can support standardized hardware selection across multiple installation sites or rooms.
The 18 inch extended concealed bracket uses 1/4 inch steel, which provides a thick, rigid structure to support substantial loads in workstation, countertop, or shelving applications.
The Pro Value Series concealed bracket has a load limit over 1,000 lb per pair, which supports heavy countertops, work surfaces, or storage shelves under demanding conditions.
The bracket uses 3/8 inch by 4 inch carriage bolts, hex nuts, and flat washers, which create a through-bolted connection for secure clamping to structural members.
The upper extension above the support arm increases vertical bearing area, which helps transfer more load into the mounting surface for superior strength under heavy tops.
All welds placed on the reverse keep the front face smooth, which improves appearance in visible installations and helps the bracket sit flat against supported surfaces.
The 18 inch extended length reaches further under tops or shelves, which helps support deeper work surfaces and provides coverage closer to the front edge.
The 18 inch extended concealed bracket in black finish from the Pro Value Series combines 1/4 inch steel construction, an upper extension above the support arm, and a load limit over 1,000 lb per pair to handle demanding support roles. Using 3/8 inch by 4 inch carriage bolts, hex nuts, and flat washers, the bracket fastens securely to structural members so countertops, shelves, or work surfaces gain strong, discreet support. Specify this concealed bracket when a dark finish, high capacity rating, and clean underside profile with all welds on the reverse align with project requirements for workstation, closet, or garage organization layouts.
Sold In: 2 Each
