SurfPrep 100 grit sanding sheet uses modified open-coat aluminum oxide grain to cut material while shedding dust between particles, which helps maintain a more consistent scratch pattern across the 3-2/3 inch by 7 inch surface during sanding. The sacrificial stearate coating on this SurfPrep sheet minimizes loading of fines onto the abrasive, which lets each sheet stay productive longer before performance drops off in cabinet and woodworking applications. The aluminum oxide grain is bonded to a film backing, which holds the abrasive flat for even contact and contributes to a uniform finish when you are preparing parts between coating steps. The no hole face design leaves the full area available for sanding, which supports full-contact passes when you are leveling surfaces. The hook and loop backing engages compatible pads quickly, supporting fast sheet changes during staged grit sequences.
This SurfPrep aluminum oxide on film sanding sheet uses hook and loop backing, which lets it attach to hook-compatible sanding pads by pressing the sheet onto the pad face for a secure hold. The no hole layout means alignment is driven only by the pad outline, so positioning the 3-2/3 inch by 7 inch sheet is straightforward when you are working through multiple grit changes. The film backing keeps the sheet flexible enough to conform to flat and slightly contoured pad faces while staying dimensionally stable, which supports predictable tracking along workpieces. With 100 grit, this sheet fits well into sanding sequences where you need a balance between material removal and surface refinement before moving to finer abrasives.
The SurfPrep aluminum oxide film sheet at 3-2/3 inches by 7 inches fits sanding pads built around this rectangular footprint, which makes it useful on flat components such as cabinet parts, rails, and stiles that match the pad width. The no hole hook and loop design keeps the full abrasive face available for contact on solid surfaces, which helps when you are leveling joints or smoothing broad faces between coats. The modified open-coat aluminum oxide grain clears dust more easily than tightly packed grain, which benefits sanding on materials that tend to load, helping maintain an even cut across the workpiece. The 100 grit rating positions this sheet for intermediate sanding steps where you need to refine prior scratches while still removing minor imperfections.
The film backing on this SurfPrep hook and loop sanding sheet keeps the abrasive layer well supported, which helps the sheet ride flat across the pad and produce a more uniform finish on repeated passes. The tear resistant backing resists splitting when the sheet is pulled from hook pads or dragged across edges, which supports longer working life and fewer mid-task changes. The sacrificial stearate coating is designed to take on loading instead of the cutting grain, which slows down clogging and lets the aluminum oxide continue to bite into the surface. This combination of film backing, stearate coating, and modified open-coat grain is aimed at keeping cut rate and finish quality stable over more workpieces, which is valuable in production sanding where consistency matters from part to part.
This SurfPrep sheet uses modified open-coat aluminum oxide grain on a film backing, which provides cutting action with a flat, stable base for consistent finish sanding.
The sacrificial stearate coating minimizes loading on the abrasive surface, which helps the sheet maintain its cut and extend working life over more sanding passes.
The sheet is 100 grit and measures 3-2/3 inches by 7 inches, which suits many rectangular sanding pads used on cabinet and woodworking components.
The hook and loop backing lets the sheet attach quickly to compatible pads, which supports fast sheet changes when stepping through grit sequences or replacing worn sheets.
The film backing provides a durable, flat support layer, which helps the aluminum oxide grain stay in uniform contact with the work surface for even sanding results.
The modified open-coat aluminum oxide grain pattern reduces clogging with dust, which keeps the abrasive cutting and supports consistent performance on multiple parts.
The SurfPrep 100 grit no hole hook and loop aluminum oxide on film sanding sheet SP3X7HLF120 combines modified open-coat grain, sacrificial stearate coating, and a tear resistant film backing to support consistent cutting and finish quality. The 3-2/3 inch by 7 inch size and hook and loop attachment align with rectangular sanding pads commonly used in cabinet and woodworking shops. For jobs that call for a 100 grit film-backed sheet that balances cut rate with surface refinement, this SurfPrep option from Wurth Baer Supply is built to keep sanding productivity steady across repeated parts.
Sold In: 1 Box