Hickory Hardware self-close variable overlay hinge gives you a semi-concealed face-mount solution that closes the door for you, which helps cabinets feel finished without adding extra closing hardware. This hinge is identified as product P139-26, so matching it on spec sheets or during reorders stays straightforward on multi-cabinet jobs. Being part of a surface face mounted collection means the hinge mounts directly on the cabinet surface, so you work from the face frame without cutting complex mortises. The variable overlay design allows the door edge to shift relative to the face frame, which helps you dial in reveals when cabinet openings are slightly out of square. A non-self-closing description in the SAP text highlights that catalog systems may use legacy wording, while the web description confirms the self-close function that pulls the door shut at the end of travel.
This surface face mounted hinge uses a screw-on attachment, so you fasten it directly with threaded fasteners instead of press-in components, which suits typical woodworking tools on site or in the shop. The specified 8-32 x 1 inch screw size defines the thread and length used for mounting, which lets you plan pilot hole sizing and depth on face frames and doors. With semi-concealed construction, part of the hinge remains visible on the cabinet face, which helps with visual alignment because you can read the hinge lines relative to door edges during installation. The self-close function built into this hinge means the closing action is driven by the hinge itself, which can reduce the need for separate closing devices on standard cabinet doors.
This semi-concealed hinge is classified under semi-concealed face-frame hinges and face mount hinges, which aligns it with typical face-frame cabinet construction in kitchens, bathrooms, and shop storage. Because it mounts on the surface of the frame, you work directly off the cabinet face, which is practical when retrofitting older cabinets that were not drilled for cup hinges. The variable overlay capability referenced in the product name provides flexibility in how far the door overlays the face frame, which helps when matching existing reveals across a run of cabinets. The hinge length of 2-13/16 inches and width of 1-13/16 inches create a compact footprint, which suits narrow rails and stiles where large hardware would crowd the frame. With a projection of 7/16 inch, door travel stays relatively close to the frame edge, which can matter around corners, inside returns, or when cabinets sit near walls.
The center-to-center measurement of 7/16 inch lets you base drilling jigs and templates on a known dimension, which speeds layout when building multiple doors with the same hinge pattern. Using 8-32 x 1 inch screws gives a consistent thread standard across installations, which simplifies stocking fasteners and reduces confusion during service work or later adjustments. The polished chrome finish ties visually to other polished chrome hardware, which helps keep a consistent hardware line across knobs, pulls, and hinges on the same project. Steel construction means the hinge body and arms are formed from steel, which supports smooth operation under typical cabinet door loads. The self-close function in this Hickory Hardware hinge pulls the door shut at the end of its swing, which helps doors sit in the closed position without needing magnetic catches. Being a surface face mounted, semi-concealed design, this hinge leaves part of the mechanism visible, which gives a clear reference point if you need to tweak door position or replace hinges later using the same mounting pattern.
The Hickory Hardware self-close variable overlay hinge is categorized as a semi-concealed face-frame, face mount hinge, which suits cabinet designs that use face frames rather than frameless construction.
The surface face mounted design places the hinge on the cabinet surface, which allows installers to work directly from the face frame without routing cups or deep mortises in the door.
The 7/16 inch projection defines how far the hinge moves the door out from the frame, which helps manage clearances near walls, adjacent doors, or interior pull-outs.
The 7/16 inch center-to-center spacing sets the distance between key mounting points, which supports accurate drilling layouts and reuse of jigs for multiple cabinet doors.
The P139-26 hinge is made from steel with a polished chrome finish, which provides a sturdy metal body and a bright, reflective look on exposed semi-concealed applications.
This surface face mounted hinge is specified with 8-32 x 1 inch screws, which guides pilot hole sizing and fastener selection for mounting to doors and face frames.
The Hickory Hardware self-close variable overlay hinge in polished chrome ties together surface face mounted installation, steel construction, and a semi-concealed look, which suits many face-frame cabinet projects. With defined dimensions for length, width, projection, and center-to-center spacing, this P139-26 hinge gives clear layout points when planning door overlays and drilling patterns. For cabinet work that benefits from a self-closing action and visible polished chrome hardware, this face mount hinge offers a consistent specification you can repeat across multiple openings.