Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Hickory Hardware 3/8 inset hinge describes this Belwith Keeler semi-concealed face mount hinge that provides a 3/8 inch offset, so a 3/8 inch inset cabinet door can sit correctly on a face frame. The semi-concealed design leaves part of the steel hinge visible, which helps during alignment and later adjustment checks on the job. The screw-on mounting style lets the installer fasten the hinge directly through the leaf, supporting straightforward layout on cabinet frames. The satin nickel finish gives the hinge a neutral metal appearance, so it visually coordinates with many satin nickel cabinet pulls in the same space. With a manufacturer part number P140-SN, the hinge can be specified and reordered consistently across projects. The hinge is identified as free swinging and non self-closing, which means the door movement is not spring-driven and can be positioned by hand as needed.
This hinge is a face mount hinge, so it fastens directly to the face of the cabinet frame, keeping installation work on the outer surface instead of cutting into the wood. The screw-on mounting style supports straightforward fastening, because the screws pass through the hinge to secure it to the cabinet components. The specified screw size of 8-32 by 1 inch defines the thread and length the hinge is designed around, which matters when matching pilot hole sizes and material thickness. A center-to-center measurement is listed, giving a repeatable spacing reference for drilling screw locations. With a projection of 9/16 inch and a length or diameter of 2-3/4 inch identified for the hinge, the installer can plan door swing paths and clearances before committing to drilling on finished cabinetry.
This hinge is identified as a semi-concealed face-frame hinge in the hinges category, so it is suited to cabinets that use a face frame construction rather than frameless carcasses. The 3/8 inch offset is designed for doors that overlap the frame by 3/8 inch while still being inset, which aligns with common 3/8 inch inset cabinet door layouts. Because it is a face mount hinge, it attaches to the front of the frame, supporting applications where the cabinet interior is already finished and the work should remain on the front side. The satin nickel finish and steel surface material suit interior woodworking environments where a satin nickel hinge appearance is preferred alongside matching pulls and knobs. The hinge width of 2-1/8 inch and length or diameter of 2-3/4 inch give it proportions that fit many standard cabinet door sizes and rail widths.
The specified 3/8 inch offset gives a defined relationship between the door edge and the frame, so once one hinge position is proven, that setup can be repeated across banks of doors with consistent reveals. The semi-concealed configuration leaves part of the hinge visible, which helps installers see screw positions and leaf alignment at a glance, reducing time spent opening and closing doors to confirm fit. The 9/16 inch projection affects how the door moves away from the frame during swing, so knowing this value helps avoid interference with nearby doors, handles, or walls. Steel as the surface material provides a sturdy base for the hinge leaves, supporting the repetitive opening and closing expected in cabinet use. The screw-on specification, paired with the 8-32 by 1 inch screw size, ties the hinge to a known fastener pattern, which supports predictable pilot hole drilling and torque settings. The clearly defined width, length or diameter, and center-to-center information all contribute to accurate layout, reduced rework, and consistent hinge placement from cabinet to cabinet.
The hinge is listed under semi-concealed face-frame hinges and face mount hinges, so it is suited to cabinets that use a face frame construction with surface-mounted hinge leaves.
The 3/8 inch offset is intended for 3/8 inch inset doors, so the door overlap and inset relationship to the face frame can follow a known pattern for consistent reveals.
The hinge is described as free swinging and non self-closing, so the door movement is not spring-driven and the door position is set by how far it is moved.
The listed 9/16 inch projection indicates how far the hinge extends from the mounting surface, which affects door swing clearance and nearby component spacing.
The 2-1/8 inch width and 2-3/4 inch length or diameter define the hinge footprint, helping lay out hinge spacing and screw locations on cabinet rails and stiles.
The satin nickel finish establishes the hinge color and sheen, supporting projects that use other satin nickel hardware and keeping the visible hinge appearance consistent.
The Belwith Keeler Hickory Hardware free swinging 3/8 inch inset face mount hinge in satin nickel brings together a defined 3/8 inch offset, semi-concealed configuration, and face-frame mounting. With its steel construction, 9/16 inch projection, and specified 2-1/8 inch width, it provides clear dimensional information to plan cabinet door layouts. The screw-on design with 8-32 by 1 inch screws and an identified center-to-center dimension supports predictable drilling patterns across multiple doors. For projects calling for a satin nickel semi-concealed face-frame hinge with a 3/8 inch inset configuration, this P140-SN hinge aligns well with those requirements.