Hickory Hardware self-close hinge gives a 1/2 inch overlay on face frame cabinet doors, so the door edge covers 1/2 inch of the frame for a consistent reveal on matching runs. This semi-concealed face frame hinge keeps part of the steel hinge visible while the rest sits out of sight, which suits traditional and utility cabinetry where quick visual alignment is useful. The steel construction provides a solid, rigid hinge body, which matters when doors are opened repeatedly in busy kitchens or shops. The antique brass finish colors the exposed portions of the hinge, so the visible hardware can coordinate with other antique brass components in the project. The self-close function brings the door shut as it approaches the frame, which helps doors settle to a closed position without manual pressure on every use during daily operation.
This semi-concealed face frame hinge uses a screw-on method, so the hinge leaves fasten directly to the door and to the face frame using 8-32 screws for secure attachment. The 1/2 inch overlay dimension sets how far the door covers the frame, which helps match new or replacement doors to an existing face frame layout. The full wrap style surrounds the frame side, which stabilizes the hinge on the frame edge during mounting and contributes to long-term alignment. A projection of 1-1/2 inches defines how far the hinge extends out when the door swings, which helps anticipate clearance around adjacent doors or walls. The hinge width of 1-9/16 inches defines the footprint on the frame edge, which matters when laying out multiple hinges along narrow rails or stiles.
This 1/2 inch overlay face frame hinge is designed for cabinets that use a face frame construction and require the door edge to overlap the frame by 1/2 inch, which is common in many kitchen and utility layouts. The semi-concealed style leaves a portion of the hinge visible on the frame, which suits projects targeting a traditional appearance where hardware is meant to be seen rather than hidden. The antique brass finish supports designs that rely on warm metal tones, so the hinge can visually align with antique brass pulls or knobs across doors and drawers. With a 1-9/16 inch width at the hinge, the footprint matches typical face frame widths, which helps the hinge sit comfortably on standard rails and stiles without crowding edges or neighboring hardware placements.
The specified 1/2 inch overlay gives a clear reference when cutting and drilling doors, which helps installers repeat the same reveal across a bank of cabinets without constant recalculation. The 1-1/2 inch projection defines the space the hinge occupies as the door moves, which helps plan door swing so adjacent doors, appliances, or walls are not obstructed during use. The full wrap structure around the frame side steadies the hinge in two directions, which reduces the tendency for the hinge to twist under door weight over time. Using a steel hinge body delivers consistent behavior under load, which helps doors open and close with the same feel after extended use. The self-close feature pulls the door shut as it nears the frame, which reduces small gaps that can appear when doors are left slightly ajar along a long cabinet run.
This Hickory Hardware self-close hinge provides a 1/2 inch overlay, so the cabinet door covers 1/2 inch of the face frame, supporting consistent reveals on matching doors.
This hinge is a semi-concealed face frame hinge with a full wrap frame wing, so it is intended for cabinets that use a face frame structure.
The P5710F-AB hinge is made from steel with an antique brass finish, so exposed areas show a warm brass tone while the steel body carries the door load.
This semi-concealed hinge has a 1-1/2 inch projection, which defines the clearance needed for door swing relative to nearby doors, walls, or cabinets.
The hinge has a width of 1-9/16 inches, a projection of 1-1/2 inches, and a 1/2 inch overlay, which together set the mounting footprint and door position.
The Belwith Keeler P5710F-AB hinge uses a screw-on mounting method with 8-32 screws, so the leaves fasten directly to the cabinet door and face frame.
The Hickory Hardware self-close hinge combines a 1/2 inch overlay, semi-concealed face frame design, and full wrap frame wing, which suits many traditional cabinet projects needing visible hardware and predictable door positioning. The steel construction with antique brass finish supports doors that will be used daily while matching antique brass decorative hardware across the project. With 1-1/2 inch projection and 1-9/16 inch width, the hinge dimensions provide clear layout references for planning door swing and hinge spacing. For new cabinets or updating existing face frame installations, this Belwith Keeler P5710F-AB hinge offers defined geometry and finish to support consistent results.