Fastmount 22 lb female self tapping clip gives a metal fixing point in panel mounting systems so panels can be secured as part of a Fastmount assembly. The 22 lb reference in the name identifies this clip within the Fastmount range, helping match it with design documents and part schedules. As a metal female clip in the Fastmount Metal Series, it serves as the receiving component in a panel assembly fitting, so it works on the panel or structure side that accepts the matching male part. Classified under panel assembly fittings, it is intended for use where panels need a defined connection position. As part of Fastmount panel mounting systems, it supports repeatable placement of panels in woodworking or interior fit-out workflows where structured fastener locations matter.
The Fastmount 22 lb female self tapping clip is installed with screws, so the installer secures it to the chosen surface using screw fixings before engaging the matching male clip. Because it is a female self tapping clip, the component is formed to accept the compatible male clip SLMC-M5, creating a defined mating interface when both parts are installed. The web description notes install tool SLMC-IT5, so the clip is designed to work with that specific tool during installation. Using the named Fastmount install tool supports consistent placement of the female clip relative to the panel or structure, which helps align the clip with the SLMC-M5 male part in a Fastmount panel mounting system.
The Fastmount 22 lb female self tapping clip sits within the Fasteners and Panel Mounting Systems category, so it is intended for use wherever structured fastening of panels is required as part of a Fastmount solution. As a panel assembly fitting, it forms part of a defined hardware set on cabinets, wall panels, or interior elements that specify Fastmount components, so the female clip MC-F10 can be positioned on the panel or supporting structure according to the installation layout. Its identity as a metal female clip means it is the receiving partner for the compatible male clip SLMC-M5, so the installer assigns it to the side of the assembly that must accept the male clip engagement.
Because the web description states compatibility with male clip SLMC-M5, the MC-F10 female clip is chosen when the matching SLMC-M5 is already specified in the project. In that role, the female self tapping clip helps define the final panel position with the male clip, which supports repeatable fit whenever the panel is mounted in the same Fastmount system.
The Fastmount MC-F10 designation links directly to the manufacturer part number MC-F10, which ties the installed clip to Fastmount documentation and drawings, reducing confusion between different Fastmount panel assembly fittings on the same job. Its classification as a metal female self tapping clip indicates that it is the female component in the Fastmount Metal Series, so installers can differentiate it from non-metal or non-female Fastmount clips when planning panel mounting sequences.
Being explicitly compatible with the SLMC-M5 male clip means the MC-F10 is part of a known Fastmount pairing, so the geometry of engagement between male and female clips is predefined rather than improvised on site. The reference to install tool SLMC-IT5 in the web description shows that Fastmount supports this clip with a dedicated installation tool, and that association allows the installer to apply the tool when positioning MC-F10, aiming for consistent clip alignment across multiple panels.
The Fastmount MC-F10 clip is a metal female self tapping clip in the Fastmount Metal Series, used as a panel assembly fitting within panel mounting systems.
The Fastmount metal female self tapping clip MC-F10 is compatible with the male clip SLMC-M5, so those two parts are used together in a Fastmount panel mounting assembly.
The Fastmount 22 lb female self tapping clip is installed with screws, so it is secured to the mounting surface before the matching SLMC-M5 male clip is engaged.
The MC-F10 female self tapping clip uses the Fastmount install tool SLMC-IT5, which is referenced in the web description for this panel assembly fitting.
This Fastmount clip is listed under Fasteners, Panel Mounting Systems, and Panel Assembly Fittings, helping project documents treat it as a dedicated panel connection part.
The name "22 lb" identifies this Fastmount female self tapping clip within the product range, so it can be distinguished from other Fastmount clips during specification.
The Fastmount 22 lb female self tapping clip MC-F10 is defined as a metal female clip in the Fastmount Metal Series, compatible with SLMC-M5 and installed with screws using install tool SLMC-IT5. Those specific identifiers and pairings help align the female clip with Fastmount panel mounting system drawings and part lists, so it can be assigned wherever a Fastmount panel assembly fitting is called out. When a project specifies the SLMC-M5 male clip and the MC-F10 female clip, this product fills the female side of that matched Fastmount connection.
Sold In: 10 Each