Fastmount male self tapping clip gives panel installers a standard profile clip that threads directly into the panel to build repeatable panel mounting systems. This clip is part of the Fastmount Standard Profile Series, so it works within that indexed fastening system for consistent alignment from panel to panel. Identified by manufacturer part number PC-M1B, it sits within the panel assembly fittings family, so it is designed to work as a structural connection point between panels and mating clips. As a panel mounting fastener, it supports woodworking workflows where panels need to be removed and refitted without damage to the panel core. Sold in box quantity, 100 per box, it supports running production work where multiple panels or sections must be mounted using the same fastening standard.
This Fastmount male self tapping clip mounts into a 3/8 inch hole, so drilling that diameter gives the correct starting point for driving the clip into the panel. The clip is installed using the SLCT-10 install tool, which provides a dedicated driving interface tailored to this part, helping keep the clip square to the panel face as it cuts its own thread. Because the clip is self tapping, it combines the drilling and threading functions at the fastening point after the 3/8 inch hole is prepared, which streamlines the assembly step on production jobs. Working as a male clip in the Standard Profile Series, it seats into matched female components to support controlled panel removal and refit.
The Fastmount PC-M1B clip sits in the Fasteners and Panel Mounting Systems category, so it is intended for applications where panels must be mechanically fastened rather than bonded. As a panel assembly fitting, it becomes the male half of a Fastmount connection, seating into SLPC-F1, SLPC-SF1, SLPC-RF1-B, or SLPC-AF1 female components to secure the panel to its support structure. Because it mounts into a 3/8 inch hole, this clip suits panel substrates where that hole size can be drilled cleanly without damaging the panel face. The standard profile configuration means this clip belongs to a defined height family, which supports layout work where several clips must share the same stand-off relative to the panel surface.
The self tapping design of the Fastmount male self tapping clip lets the PC-M1B form its own thread in the drilled 3/8 inch hole, which reduces separate tapping operations and keeps the panel interface consistent clip to clip. Using the SLCT-10 install tool gives this part a dedicated driving method, which helps maintain alignment as the clip is driven home, reducing the risk of skewed clips that could compromise fit with the mating female parts. Interfacing specifically with SLPC-F1, SLPC-SF1, SLPC-RF1-B, and SLPC-AF1 ties this clip into a defined Fastmount ecosystem, so the relationship between panel and sub-structure is mechanically indexed rather than improvised. The specified 11 lbs pull out force gives installers a numeric value to use when deciding clip quantity and spacing, supporting predictable performance of the finished panel mounting system.
The Fastmount PC-M1B is a male self tapping clip in the Standard Profile Series, so it functions as a panel assembly fitting within Fastmount panel mounting systems.
The Fastmount male self tapping clip mounts into a 3/8 inch hole, giving installers a clear drilling dimension for preparing panel substrates.
The Fastmount PC-M1B fits into SLPC-F1, SLPC-SF1, SLPC-RF1-B, and SLPC-AF1, so it operates as the male component in those Fastmount connections.
The Fastmount PC-M1B is a self tapping clip installed into a drilled 3/8 inch hole using the SLCT-10 install tool to drive and seat the clip.
The Fastmount male self tapping clip has a pull out force of 11 lbs, giving a defined straight-pull resistance value for panel mounting calculations.
The standard profile design sets the Fastmount PC-M1B within a fixed height family, supporting consistent stand-off and alignment across multiple clips on a panel.
The Fastmount male self tapping clip in the Standard Profile Series gives panel installers a defined PC-M1B component that mounts into a 3/8 inch hole and interfaces with specific SLPC-series female clips. With its 11 lbs pull out force and dedicated SLCT-10 install tool, this panel assembly fitting supports planned clip spacing and repeatable installation steps. For projects using Fastmount panel mounting systems, choosing this standard profile male clip helps maintain a consistent fastening standard across panels.
Sold In: 100 Each