PANEL CLIP - SELF TAPPING MALE, PC-M2H

Fastmount PC-M2H Panel Clip For Secure Mounting

Fastmount PC-M2H panel clip is a self tapping male panel assembly fitting that mounts into a 3/8 inch hole, giving installers a defined drill size that speeds layout and drilling on repeat work. As part of the Fastmount panel mounting systems category, this clip is designed as a panel assembly fitting, so it works as a structural connection point between the panel and a matching female clip. The heavy duty description signals that the clip is intended for demanding panel applications where load rating is important during service. With a minimum panel thickness of 11/32 inch, the clip suits jobs where panels fall at or above this thickness, helping set material choices during project planning. The PC-M2H identity lets shops standardize on a precise manufacturer part number for reordering and matching to drawings.

Key Fastmount PC-M2H Panel Clip Details

• The PC-M2H is a self tapping male clip, so it forms its own thread in the prepared 3/8 inch hole, reducing separate tapping steps and keeping installation straightforward on site or in the shop.
• Mounting into a 3/8 inch hole defines the drill size needed before pressing in the clip, supporting consistent fit and repeatable alignment across multiple panels in the same project.
• The clip fits into Fastmount female clips SLPC-F1, SLPC-SF1, SLPC-RF1-B, and SLPC-AF1, allowing planners to specify compatible mating components for the complete panel mounting system.
• A minimum panel thickness of 11/32 inch means the clip is suited to panels at this thickness or greater, which guides material selection when designing wall or ceiling panel layouts.
• A pull out force of 22 lbs indicates the resistance to straight-line withdrawal, helping installers judge loading expectations when panels are removed and refitted during service access.
• The designated install tool SLCT-10 is matched to this clip, so installers have a clear tool reference for driving the clip properly and keeping installation technique consistent.

Installation And Fit For Self Tapping PC-M2H

The Fastmount PC-M2H self tapping male clip mounts into a 3/8 inch hole, so installation starts with drilling that precise diameter to receive the clip. Because the clip is self tapping, it forms its own grip as it is driven, which streamlines work compared with separate tapping operations. The specified minimum panel thickness of 11/32 inch helps align this clip with suitable substrates, so the installer works within a known material window. Using the SLCT-10 install tool ties the process to a dedicated driver, helping maintain alignment and seating depth while clips are installed across a run of panels.

Using Fastmount PC-M2H In Panel Mounting Systems

Where The PC-M2H Panel Clip Is Applied

The Fastmount PC-M2H panel clip sits within the Fasteners and Panel Mounting Systems category, so its role is to anchor panels as part of a defined system. As a panel assembly fitting, this male clip works with matching Fastmount female clips SLPC-F1, SLPC-SF1, SLPC-RF1-B, and SLPC-AF1 to create a connection between substrate and removable panel. The need for a 3/8 inch mounting hole means it is suited to applications where that hole size can be drilled into the panel material, such as many architectural or furniture panels that meet the minimum 11/32 inch thickness requirement. In use, this arrangement lets the male clip on the panel engage the female clip fixed to the supporting structure so the panel can be mounted and later removed as needed.

Why PC-M2H Details Matter For Repeatable Results

The PC-M2H self tapping design means the clip cuts its own thread as it is driven into the 3/8 inch hole, which reduces variation that might appear with separate tapping setups and helps multiple installers follow the same process. The specified minimum panel thickness of 11/32 inch gives designers a clear boundary when choosing materials, so panel edges and cores are thick enough to support the clip in service. The 22 lbs pull out force rating gives a numeric value for the axial load the connection can resist, which aids in planning how panels will behave during normal removal and refitting. Matching the clip with the SLCT-10 install tool ties the installation method to a named tool, helping shops document a standard workflow. The defined compatibility with SLPC-F1, SLPC-SF1, SLPC-RF1-B, and SLPC-AF1 female clips lets the system be laid out confidently on drawings and cut lists so the correct components are paired from the start.

Common Questions About Fastmount PC-M2H Panel Clip

Select Fastmount PC-M2H For Defined Panel Mounting

The Fastmount PC-M2H panel clip gives installers a self tapping male fitting that works in a 3/8 inch hole with panels from 11/32 inch thickness. With defined compatibility to Fastmount female clip models and a 22 lbs pull out force rating, it offers specific values for planning panel layouts. Using the SLCT-10 installation tool and the PC-M2H part number simplifies specifying, ordering, and repeating the same configuration across projects. Choose this Fastmount panel assembly fitting when a structured panel mounting system and known performance figures are required.