Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dorus KS217 hot melt adhesive is a white, filled hot melt adhesive supplied in pellet form that bonds PVC, wood, laminates, veneer, polyester, melamine, solid wood, ABS, tropical and oils veneers and laminates such as teak and pine, so one adhesive can be used across mixed edgebanding runs in the shop. The adhesive provides very good adhesion with PVC, wood and laminates, which helps edgeband stay secure on cabinets and panels during everyday use. The formulation delivers high bond strength and coverage, so each pass along the edge uses less material for the same holding power. Very good wetting even on difficult edgebanding materials produces tight joints along the edge, which supports clean-looking seams after trimming and scraping. High final bond strength and high heat resistance keep edges stable when parts are exposed to typical heat sources during service.
This hot melt adhesive has an application temperature range of 374-392 F, which defines the working melt window so the glue can wet the banding properly during application. Within that range, the viscosity is specified at 55,000 at 392 F, giving a flow profile that supports controlled, even laydown from typical edgebander glue systems. The stated good running properties mean the adhesive is formulated to move smoothly through granular feed or quick melt glue systems, helping maintain a consistent glue film during production. A recommended feed speed of 40 ft./minute ties the adhesive behavior to typical machine settings, so operators can match line speed to the adhesive characteristics for reliable bonding along the full edge length.
This hot melt adhesive is used as an edgebanding adhesive on veneer, polyester, PVC, melamine, solid wood, ABS, tropical and oils veneers and laminates such as teak and pine, so it can serve on both man-made and natural edge materials. Very good adhesion with PVC, wood and laminates allows one adhesive to handle common carcass boards and decorative bands without changing glue between runs. Because it is the most commonly used type of edgebanding adhesive, it aligns well with standard cabinet and fixture production where repeatable results across many board types are important. High final bond strength supports use on working edges that experience regular handling, helping the banding stay seated at doors, drawer fronts and casework edges. High heat resistance supports performance in interior spaces where panels may be exposed to elevated temperatures from lighting or nearby equipment.
The multi-purpose formulation recommended for granular feed or quick melt glue systems, and also effective in standard glue pot setups, means Dorus KS217 fits both modern and conventional edgebanders, simplifying adhesive stocking when a shop operates multiple lines. Good running properties support smooth conveying of pellets through hoppers and melt units, which helps maintain steady glue weight and reduces interruptions during long runs. Very good wetting even on difficult edgebanding materials produces tight joints, which is important when trimming and scraping, because a well-wetted joint resists chipping at the interface. High coverage allows technicians to achieve strong bonds with a thinner applied layer, which can improve edge appearance while controlling adhesive consumption on high-volume jobs. The specified viscosity at 392 F, combined with the 374-392 F application range, provides a clear thermal window for setting machine temperatures so the glue flows enough to wet surfaces while staying in place on the edge.
Dorus KS217 hot melt adhesive bonds veneer, polyester, PVC, melamine, solid wood, ABS, tropical and oils veneers and laminates such as teak and pine, so it covers a wide range of typical edgebanding materials.
This hot melt adhesive is used as a multi-purpose edgebanding adhesive, providing very good adhesion with PVC, wood and laminates, tight joints and high final bond strength for cabinet and panel edges.
Dorus KS217 hot melt adhesive is recommended for granular feed or quick melt glue systems and also performs well in standard glue pot setups, so it suits different edgebander designs.
This hot melt adhesive has an application temperature range of 374-392 F, which sets the thermal window for melting and applying the glue during edgebanding operations.
Dorus KS217 hot melt adhesive has a viscosity of 55,000 at 392 F, giving a flow characteristic that supports controlled glue application on edge surfaces.
This hot melt adhesive lists a feed speed of 40 ft./minute, linking the adhesive performance to a typical edgebander line speed for consistent bonding.
Dorus KS217 hot melt adhesive in white pellet form is a multi-purpose edgebanding adhesive that bonds veneer, polyester, PVC, melamine, solid wood, ABS, tropical and oils veneers and laminates such as teak and pine, so a single product can serve varied production work. Very good adhesion, very good wetting, high bond strength and high coverage support strong, tight joints along cabinet and panel edges. With an application temperature range of 374-392 F, specified viscosity at 392 F and a 40 ft./minute feed speed reference, the adhesive aligns with common edgebander settings, making it a practical choice for steady shop workflow.
Sold In: 55 Pound
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 44 Pound |  JW28871-44 Mfr# 288.71 | Jowatherm All Purpose Hot Melt Glue, White, 44lb Bag |
