
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Dorus KS217 hot melt adhesive is a filled hot melt adhesive formulated for edgebanding work where PVC, wood, and laminates are used together, so one product supports a broad range of shop tasks. The natural color hot melt pellets are suitable for use as a multi-purpose hot melt in granular feed or quick melt glue systems, which helps match the adhesive feed style of many edgebanders. The same adhesive also performs well in standard glue pot setups, so a single adhesive can serve both quick melt and traditional machines. Very good adhesion with PVC, wood, and laminates produces dependable bonding across these materials during production runs. High bond strength and coverage help support strong edge bonds along longer parts. Very good wetting, even on difficult edgebanding materials, helps the glue flow into surface irregularities so joints remain tight along the full length.
The technical information lists a viscosity of 55,000 at 392 F, which describes how the adhesive flows at that temperature and helps relate to glue spread behavior in the machine. The softening point of 221 F defines the temperature at which the solid adhesive begins to soften, which indicates conditions where the bond transitions from solid to softened. An application temperature range of 374-392 F allows the adhesive to be applied in a molten state across this band, which ties directly to typical edgebander temperature settings. A feed speed of 40 ft./minute is specified, which connects the adhesive performance to a defined line speed during edgebanding operations.
This hot melt adhesive is described as a multi-purpose hot melt recommended for granular feed or quick melt glue systems, which means it supports edgebanders designed to meter pellets through these feeding styles. The adhesive also performs well in standard glue pot setups, so it can be used in machines that maintain a molten glue reservoir during continuous operation. Applications listed include veneer, polyester, PVC, melamine, solid wood, ABS, tropical and oils veneers, and laminates such as teak and pine, which ties the product directly to a wide range of common edge materials. Very good adhesion with PVC, wood, and laminates, combined with very good wetting, supports bonding across these materials so a single adhesive can serve diverse edge programs in the same shop.
Very good wetting even on difficult edgebanding materials helps the molten adhesive spread across surfaces, which contributes to tight joints that visually close the seam between edge and panel. High final bond strength gives the glue line strong holding power once cooled, which matters when edges experience handling, machining, or in-service loads. High heat resistance means the finished bond holds up when temperatures approach the listed softening point, which supports performance where components may be exposed to elevated ambient or incidental heat. Good running properties help maintain steady adhesive flow through granular feed or quick melt systems and standard glue pots, which supports consistent glue film thickness and reduces variation along the panel length. Being described as the most commonly used type of edgebanding adhesive connects these properties to everyday edgebanding conditions in typical woodworking production.
Dorus KS217 hot melt adhesive is a filled hot melt adhesive, which provides very good adhesion with PVC, wood, and laminates for typical edgebanding applications.
The adhesive is used for veneer, polyester, PVC, melamine, solid wood, ABS, tropical and oils veneers, and laminates such as teak and pine in edgebanding work.
The hot melt adhesive is recommended for granular feed or quick melt glue systems and also performs well in standard glue pot setups on edgebanders.
The hot melt adhesive has an application temperature range of 374-392 F, which aligns with typical temperature settings on edgebanding equipment.
The adhesive has a viscosity of 55,000 at 392 F, which relates to how it flows through glue systems and forms a consistent glue line on the edge.
The hot melt adhesive is described as the most commonly used type of edgebanding adhesive because it offers high bond strength, good running properties, and broad material suitability.
Dorus KS217 hot melt adhesive, natural, 55lb bag from Doellken Woodtape provides a multi-purpose hot melt adhesive option for veneer, PVC, melamine, solid wood, ABS, and laminate edgebanding. Its very good adhesion with PVC, wood, and laminates, combined with high bond strength and coverage, supports tight, secure edges across varied jobs. Good running properties, a 374-392 F application temperature range, and suitability for granular feed, quick melt glue systems, and standard glue pot setups align this adhesive with common edgebanding equipment. For woodworking operations that need one hot melt adhesive to serve a broad set of edgebanding materials and machine styles, this product aligns performance properties with typical shop requirements.
Sold In: 55 Pound
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Box | WWTHERM300-NAT Mfr# 089047742 088 1 | Thermomelt™ 300 Edgebanding Pellet, Natural , 33.1lb Box |