Amerock Glacio Series Clear Crystal/Gunmetal 1-3/8 in (35 mm) L x 1-3/8 in (35 mm) W Knob, -BP36653CGM
Description
Amerock Glacio Cabinet Knob For Doors And Drawers
Amerock Glacio cabinet knob is a clear crystal and gunmetal knob designed for drawers and doors, so it handles typical cabinet use while adding a defined visual point on the face. The Glacio Collection blends crystal-clear accents with finished mountings, which creates a strong contrast that helps the knob stand out on the surface. This knob measures 1-3/8 inch in diameter and width, giving a compact footprint that suits standard cabinet layouts without crowding adjacent hardware. The projection is 1-5/16 inch, providing hand clearance while keeping the pull point close to the door or drawer front for controlled opening. A base diameter of 3/4 inch keeps the contact area tight, which helps when aligning the knob to stile or rail details. The knob uses an 8-32 thread, aligning with common cabinet drilling setups in many shops.
Key Glacio Knob Details For Daily Use
- The Glacio Collection design blends crystal-clear accents with finished mountings, so the clear top visually floats above the gunmetal base and creates depth on flat fronts.
- A clear crystal and gunmetal finish combination delivers a light-catching face with a darker anchor point, which helps the knob read clearly against both light and dark cabinet finishes.
- Zinc material in the mounting body provides a solid metallic base for the crystal element, giving a firm feel at the grip point and consistent seating against the door or drawer front.
- The 1-3/8 inch diameter and width concentrate the pull area, which is practical for standard 3 inch and wider stiles where centered knobs need a balanced proportion.
- A 1-5/16 inch projection pulls the gripping surface forward enough for fingers to catch the knob while keeping the throw short, which supports smooth operation in tighter walkways.
- The 3/4 inch base diameter keeps the footprint compact, which helps when laying out knobs close to panel edges or decorative profiles without overlapping details.
Installation Fit And Mounting Dimensions
This Amerock Glacio knob uses an 8-32 thread, so it works with common cabinet door and drawer drilling patterns that are already tapped for standard 8-32 machine screws. The 1-3/8 inch diameter gives the installer a clear center point to reference when marking the bore location on stile or rail intersections. A projection of 1-5/16 inch balances clearance and reach, which matters when setting knobs in rows on upper and lower doors where hands approach from different angles. The 3/4 inch base diameter defines a small contact circle, so it sits neatly on narrow frames and flat panel faces without covering routed edges or profiles that need to remain visible.
Using The Glacio Knob In Cabinet Projects
Where This Clear Crystal Knob Works Best
The clear crystal and gunmetal finish on this Glacio knob suits cabinet layouts where contrast and light play are part of the design, because the transparent top lets surrounding finishes show through while the gunmetal base anchors the look. At 1-3/8 inch diameter, the knob scales well on standard kitchen and bath doors or drawers, avoiding an oversized look on small fronts while still reading as a defined pull point on wider faces. The 1-5/16 inch projection positions the gripping surface slightly off the face, which is useful on doors near walls or tall appliances where additional reach could cause contact. With a 3/4 inch base diameter, the knob seats cleanly on narrow rails, so it suits applications such as smaller vanity doors or upper cabinets where stile width is limited.
Details That Support Consistent Cabinet Layouts
The consistent 1-3/8 inch width and diameter help maintain even sight lines when this knob is repeated across a run of doors and drawers, because each center point aligns visually without changing the footprint. The zinc mounting body gives the knob a defined weight at the hand, which supports repeatable feel across multiple openings in high-use areas. Using an 8-32 thread ties the knob to a standard fastener size, which simplifies planning for door and drawer fronts drilled on shop jigs that expect 8-32 hardware. The 1-5/16 inch projection keeps the functional depth uniform across the project, so doors and drawers open with a similar hand position even when cabinet depths vary. The 3/4 inch base diameter keeps the bearing surface tight to the mounting area, which helps when aligning the knob to centerlines or measured offsets along detailed moldings.
Common Questions About Amerock Glacio Cabinet Knob
What are the key dimensions of this Amerock Glacio knob?
The Amerock Glacio knob has a 1-3/8 inch diameter and width, a 1-5/16 inch projection, and a 3/4 inch base diameter, so it fits typical cabinet fronts without crowding nearby edges.
How does the clear crystal and gunmetal finish look on cabinets?
The clear crystal top and gunmetal base create a contrast where the crystal catches light while the darker base defines the mounting point, helping the knob stand out on doors and drawers.
What material is used in the Amerock Glacio knob body?
The Amerock Glacio knob uses zinc for the mounting body, which provides a solid metallic base under the crystal component and a firm feel when pulling doors or drawers.
Which thread size does this knob use for mounting?
This Glacio knob uses an 8-32 thread, so it matches standard cabinet hardware drilling and tap sizes commonly used in cabinet shops and installation work.
How far does the Glacio knob project from the cabinet face?
The Glacio knob projects 1-5/16 inch from the cabinet surface, positioning the grip close enough for tight spaces while giving fingers room to pull comfortably.
What does the 3/4 inch base diameter mean in practice?
The 3/4 inch base diameter defines a compact contact area on the cabinet face, which helps when positioning the knob on narrow stiles or near molded details.
Select This Knob For Crystal And Gunmetal Projects
The Amerock Glacio cabinet knob pairs a clear crystal face with a gunmetal base, so it supports projects that call for visible contrast and defined pull points on cabinet fronts. Its 1-3/8 inch diameter, 1-5/16 inch projection, and 3/4 inch base diameter give predictable sizing for layout work across doors and drawers. With a zinc mounting body and 8-32 thread, the knob fits into standard cabinet hardware workflows while maintaining consistent feel across multiple openings.
