Amerock Glacio pull 96mm describes a cabinet pull from the Amerock Glacio collection that uses a 96 mm center-to-center dimension, giving installers a defined drill layout that matches standard 3-3/4 inch handle spreads. The pull combines zinc and glass material, creating a solid metallic mounting with a clear glass grip that presents a distinct visual break between the two surfaces. The finish is listed as clear and gunmetal, so the transparent glass sits visually against a dark metallic tone that suits modern, transitional, and contrast-heavy cabinet designs. The pull length is 5-5/16 inches, so the overall bar extends past the 3-3/4 inch mounting span for finger clearance at each end. A projection of 1-1/2 inches moves the hand gripping point forward from the door face, which helps fingers wrap behind the glass bar on thicker doors and drawer fronts.
The 3-3/4 inch (96 mm) center-to-center measurement defines the mounting span, so holes are positioned to match that distance when laying out new fronts or re-using an existing pattern with the same spacing. A 1-1/2 inch projection controls how far the pull stands off the face, which is useful when planning around door reveals or adjacent hardware so that hands can grip without brushing the door surface. The 5-5/16 inch overall length sets the visual length along the rail, allowing spacing decisions near panel profiles or appliances. With a width of 3/4 inch, the bar sits visibly narrow compared to its length, which influences placement on slim stiles or divided drawer fronts.
The Glacio series pull is described as blending crystal-clear accents with finished metallic mountings, so the pull works in layouts where a clear glass grip is desired with a defined metal base. The clear and gunmetal finish pairing lets the pull sit on light or dark cabinetry while maintaining visible contrast, because the transparent glass reads differently from the dark metal feet. The 3-3/4 inch (96 mm) center-to-center size aligns with a common cabinet drilling standard, so this pull fits projects built around that spacing across kitchen, bath, or built-in casework. With a 5-5/16 inch overall length, the pull can be used on both doors and medium-width drawers where a mid-sized handle footprint is needed for proportion.
The defined 96 mm center-to-center spacing supports consistent drilling jigs and repeated layouts, because the installer can set a single template dimension for all locations using this Amerock Glacio pull 96mm. The 1-1/2 inch projection keeps the hand contact point away from the door or drawer face, which can help reduce fingerprint transfer directly at the edge of high-use fronts. A 3/4 inch width across the front bar makes the pull feel slender relative to its length, which influences drilling choices on narrow rails where wider pulls might crowd the edges. The zinc and glass material build assigns the structural role to zinc while presenting glass visually, which allows the mounting feet to maintain rigidity against the cabinet surface as the glass grip is used. The clear and gunmetal finish pairing maintains a defined boundary between the transparent section and the darker base, which helps align the pull in designs built around mixed materials.
The Amerock Glacio series pull has a 3-3/4 inch, or 96 mm, center-to-center size, which sets the drilling distance between mounting holes on cabinet doors and drawers.
The BP36654CGM pull is 5-5/16 inches long, so it extends past the mounting holes to give extra grip area and a defined visual footprint on the cabinet front.
The pull uses zinc and glass, with zinc providing the metallic mounting section and glass forming the clear grip, combining structural support with a transparent accent.
The pull has a 1-1/2 inch projection, so it stands off from the cabinet surface, giving room behind the bar for fingers when opening doors and drawers.
The width of the pull is 3/4 inch, which defines the front bar profile and helps align the hardware visually on narrow or wider cabinet rails.
This Glacio series pull is described as clear and gunmetal, pairing a transparent glass grip with a dark metallic mounting for contrast on cabinet fronts.
This Amerock Glacio pull 96mm pairs a 3-3/4 inch center-to-center span with a 5-5/16 inch overall length, giving a mid-size footprint that works across doors and drawers. The zinc and glass construction with clear and gunmetal finish supports projects targeting a mixed-material look. With its 1-1/2 inch projection and 3/4 inch width, the pull offers predictable hand clearance and a slender profile. For cabinet runs based on 96 mm spacing, this part number BP36654CGM provides a defined size and finish combination ready for repeatable layouts.
Sold In: 1 Each
