Amerock Glacio Series 5-1/16 in (128 mm) Center to Center Clear/Gunmetal Pull, -BP36655CGM

Amerock Glacio 128mm Pull For Cabinets

Amerock Glacio 128mm pull is a decorative cabinet handle that uses a zinc and glass construction to deliver a clear, crystal-like grip supported by a sturdy metal mount. The pull spans 6-9/16 inches in overall length, giving doors and drawers a substantial handhold across the face. A 5-1/16 inch center-to-center mounting dimension matches the 128 mm standard, so hole spacing lines up with common cabinet drilling patterns. The 1-1/2 inch projection sets the grip away from the surface, providing finger clearance when opening heavier fronts. A 3/4 inch width keeps the pull looking slim while still offering a defined edge to grab. The clear and gunmetal finish combination ties glass clarity to a darker metallic base, so the pull reads as both decorative hardware and a functional handle on finished installations.

Practical Details Of This Glacio Cabinet Pull

• The 5-1/16 inch (128 mm) center-to-center dimension controls drilling layout, so cabinets can be bored accurately and repeated across multiple fronts without layout changes between doors and drawers.
• The 6-9/16 inch overall length spreads the handle visually across the panel, which helps balance wider drawer fronts and gives hands more contact area when pulling loaded drawers open.
• The 1-1/2 inch projection stands the grip out from the cabinet face, allowing fingers to wrap behind the pull comfortably even on thicker door profiles or applied molding details.
• The 3/4 inch width keeps the handle profile slim, which supports tight reveals between fronts while still presenting an edge that installers and users can reliably grasp.
• The clear and gunmetal finish pairing creates a contrast between the glass and metal portions, helping the pull read clearly against both light and dark cabinet finishes on the job.
• The zinc and glass material combination uses metal at the mounting points and glass along the visible grip, so the pull works as both a structural handle and a design element.

Mounting And Fit Details For The 128mm Pull

This Amerock Glacio pull uses a 5-1/16 inch (128 mm) center-to-center layout, so installers can align it with standard 128 mm drilling jigs and boring patterns on cabinet doors and drawers. The 6-9/16 inch overall length leaves some metal and glass extending beyond the mounting holes, which visually anchors the pull on the face while keeping the screw locations predictable. With a projection of 1-1/2 inches, the handle stands off enough for fingers to get behind the glass portion without contacting the cabinet face during normal use. The 3/4 inch width keeps the footprint narrow, helping the pull fit between tight edge distances or on narrower rails where wider hardware might crowd the design.

Using This Amerock Glacio Pull In Projects

Where The Glacio Clear Gunmetal Pull Fits

The Amerock Glacio Series 5-1/16 in (128 mm) center to center clear/gunmetal pull operates as a handle for cabinet doors and drawers in decorative hardware installations. As part of the Glacio collection, it pairs crystal-clear accents with metallic gunmetal mounts, which gives designers a way to coordinate multiple pulls on the same project while keeping a consistent visual story. The zinc and glass materials position the metal portion at the mounting area and the glass along the grip, so the working load transfers through the zinc while the glass remains the visible touchpoint. In use on cabinets, the 6-9/16 inch length and 5-1/16 inch hole spacing place the mounting points toward the center of the pull, distributing force across the face of the cabinet front when the handle is pulled.

Details That Support Consistent Cabinet Results

The 128 mm center-to-center dimension on this Amerock BP36655CGM pull aligns with a widely used drilling standard, which supports repeatable setups when fabricators run multiple doors and drawers through a boring pattern. The 1-1/2 inch projection keeps the glass grip clear of the cabinet face, reducing hand contact with finished surfaces during everyday operation. A 3/4 inch width allows the pull to sit comfortably on rails or stiles without overpowering the joinery lines, so layouts stay clean across banks of fronts. The clear glass portion visually lightens the hardware while the gunmetal finish on the zinc base defines the mounting area, making it easier to position the pull relative to edges and reveals during installation. Across a run of cabinets, these consistent dimensions help maintain uniform handle placement and workflow.

Common Questions About This Glacio Cabinet Pull

Selecting This Pull For Cabinet Projects

This Amerock Glacio cabinet pull pairs a 5-1/16 inch (128 mm) center-to-center layout with a 6-9/16 inch overall length, so it fits standard drilling while spanning the face of doors and drawers. The zinc and glass construction with a clear and gunmetal finish turns the handle into both a working grip and a design element on completed cabinets. For projects that call for decorative handles and pulls, this part number BP36655CGM offers a defined size, projection, and visual style ready to integrate into layout plans.