Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Blythe Series cabinet pull from Amerock Corporation is a zinc die-cast handle designed for cabinet and furniture doors or drawers where a traditional look is needed. The pull uses a 5-1/16 inch (128 mm) center-to-center dimension, so it spans standard drilling patterns used on many cabinet layouts and helps align new or replacement work with existing holes. A ribbed barrel center flanked by decorative accents controls hand placement, giving fingers a consistent grip point along the pull. Smooth curved lines run out to each base, which helps the pull feel comfortable to grab from different approach angles. The polished nickel finish presents a bright, reflective surface, so it coordinates with other polished nickel decorative hardware on the same run of cabinets.
The pull uses a 128 mm center-to-center screw spacing, so installers can align this Amerock part with existing 128 mm drilling without reworking hole locations. The length of 5-3/4 inches (146 mm) gives a bit of coverage beyond the hole centers, which helps visually balance the pull on wider rails or drawer fronts. A projection of 1-9/16 inches (40 mm) sets the standoff, leaving room for fingers between the pull and the face when mounted on standard cabinet doors or drawer boxes. With an 11/16 inch (17 mm) width and an 11/16 inch (17 mm) base diameter, the contact area around each mounting point stays compact, so the hardware suits fronts where space between edges or neighboring pulls is limited.
The Amerock Blythe Series cabinet pull, identified by manufacturer part number BP55224PN, is sized for cabinet and furniture applications that match a 128 mm center-to-center layout. That metric spread is common on many factory-bored cabinet doors and drawers, so the pull fits projects where hardware positions are already set. The 5-3/4 inch (146 mm) overall length lets the pull sit comfortably on standard drawer fronts without overpowering a modest rail height. With a projection of 1-9/16 inches (40 mm), the handle stands off far enough for a full finger grip, which is useful on deeper fronts such as pantry doors or tall vanity drawers. The polished nickel finish supports use anywhere a bright, traditional-metal look is part of the design, from kitchen runs to office storage and shop cabinetry that uses decorative hardware.
The 5-1/16 inch (128 mm) center-to-center dimension on this zinc die-cast cabinet pull gives installers a predictable drilling pattern for repeat layouts across multiple cabinets. By matching holes at exactly 128 mm apart, the pull keeps hardware rows straight when doors and drawers are ganged along a wall. The 11/16 inch (17 mm) base diameter concentrates the contact around each screw location, which helps the pull sit neatly over the bore while keeping the footprint tight near panel edges. A consistent 11/16 inch (17 mm) width through the grip allows layouts to stay visually even when several pulls are used in a line, since each handle presents the same front profile to the eye. The polished nickel finish on the Blythe Series handle adds a clear, reflective surface that stays visually consistent across a bank of cabinets when all pulls in the run share this same Amerock specification.
The BP55224PN cabinet pull has a 5-1/16 inch (128 mm) center-to-center spacing, so it lines up with drilling patterns set to that common metric hardware layout.
The Blythe Series cabinet pull measures 5-3/4 inches (146 mm) in overall length, giving coverage that suits many standard drawer fronts and door rails.
The Amerock zinc die-cast pull projects 1-9/16 inches (40 mm) from the surface, creating space for fingers between the cabinet face and the grip.
This cabinet handle is made from zinc die-cast material with a polished nickel finish, combining a solid metal body with a bright, reflective surface.
The Blythe Series pull has an 11/16 inch (17 mm) width, giving a consistent front profile and defined grip thickness on doors and drawers.
The Blythe Collection pull uses a ribbed barrel center with decorative accents and smooth curved lines, creating a traditional cabinet hardware appearance.
The Blythe Series cabinet pull from Amerock Corporation brings a ribbed barrel center, decorative accents, and smooth curved lines together in a polished nickel finish, so it suits traditional cabinet layouts. With a 5-1/16 inch (128 mm) center-to-center spacing, 5-3/4 inch (146 mm) overall length, and 1-9/16 inch (40 mm) projection, it matches common cabinet drilling and clearance needs. For projects that call for zinc die-cast construction and a polished nickel look under the Amerock BP55224PN part number, this pull offers a coordinated option to keep door and drawer hardware consistent across the run.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  AMBP55222-WN Mfr# BP55222WN | Amerock Blythe 3" (76 mm) Center to Center Weathered Nickel Pull, BP55222WN |