105 Degree Soft-Closing Air Hinge For Concealed Doors

105 degree opening integrated soft-closing air hinge gives cabinet doors a 105 degree swing while controlling the close, which helps protect the door and cabinet faces in everyday use. Salice Air hinges are fully recessed into both the cabinet door and cabinet, so the hardware stays concealed and keeps clean lines on visible surfaces. The nickel-plated finish identifies this version and coordinates with other nickel hardware in the same run. As an invisible hinge in the Invisible and Recessed Hinges category, it supports designs where exposed hinges would conflict with the layout. Being part of Salice America means this hinge follows a system approach, which is useful when matching hinges across multiple doors in a project.

Key Salice Air Hinge Details For Cabinet Work

• The hinge height is only 10 mm, so it recesses into shallow pockets and preserves more material around the mortise, which helps maintain door strength near the edge.
• The hinge is fully recessed into cabinet door and cabinet, which keeps the hardware hidden and reduces visual distractions on frameless or flush cabinet fronts.
• Three way adjustment built into the hinge allows fine-tuning in three directions, which helps align reveals and compensate for small drilling variances during installation.
• The hinge attaches to the top and bottom panel of the cabinet, so loads are carried vertically and distributed at two points, which helps support the specified door sizes.
• The opening degree of 105 degrees lets doors swing past square, which provides easier reach into the cabinet interior without over-rotating the door.

Invisible Hinge Mounting And Door Preparation Details

Designed for minimum 18 mm (3/4 inch) thick wood doors or panels, this hinge suits common cabinet door stock, which simplifies material selection on a shop-standard build. Compatibility with aluminum-framed doors allows the same hinge type to be used on mixed-material runs where some doors are aluminum framed. A 16.5 mm deep metal cup defines the pocket depth in the door, so boring operations can be set once and repeated across multiple doors. The cup length L = 2.5 mm guides the mortise layout and helps position the hinge accurately relative to the door edge. Possible drilling distance on the door for wood doors from 3 mm (1/8 inch) to 6 mm (1/4 inch) provides a narrow but usable band for setting overlay or inset relationships within the Salice layout.

Why This Salice Invisible Hinge Fits Demanding Projects

Invisible Recessed Air Hinge For Cabinet Doors

This Salice invisible recessed air hinge installs fully inside both the cabinet and door, which lets designers run continuous face lines without exposed hardware interruptions. Being part of the Invisible Hinges product class means it is intended for applications where traditional cup-and-arm hinges would be visible and change the aesthetic. The nickel-plated finish suits projects where bright metal details are used elsewhere, which can support a consistent hardware look across a room. With a maximum door weight of 44 lb (20 kg), the hinge handles typical single cabinet doors, which helps keep heavier doors working within the stated envelope. The maximum door height of 2,100 mm (84 inches) and width of 610 mm (24 inches) define the outer limits for door size, which helps plan tall cabinets or wider doors while staying inside the hinge capability. The hinge is available with a soft-close mechanism, so doors decelerate during closing and contact the cabinet more gently, which reduces impact on the mounting points over repeated cycles. The product is available in nickel or titanium finishes, offering a choice of appearance so projects can align the hinge finish with other components on the job.

Three Way Adjustment And Soft-Close For Consistent Results

The hinge comes with three way adjustment, which lets the installer adjust vertically, horizontally, and in depth at the hinge location so reveals can be dialed in after the door is mounted. This three way adjustment capability is valuable when cabinet boxes vary slightly from plan, because it allows the door position to be corrected without re-boring or re-mortising. The integrated soft-closing function is part of the hinge design, so no separate damper is needed at the hinge location and the close behavior remains consistent across the door. A 105 degree opening angle provides enough swing for most base and wall cabinet layouts, which helps doors clear face frames or adjacent doors within standard kitchen and casework geometry. Designed for aluminum-framed doors as well as minimum 18 mm thick wood doors or panels, the hinge supports projects that mix materials while maintaining the same opening and closing characteristics. The stated maximum door size of 2,100 mm high by 610 mm wide and maximum door weight of 44 lb helps determine the number of hinges and door design parameters for a given run. The metal cup depth of 16.5 mm is shallow enough for standard door constructions, which keeps boring operations straightforward on both small and tall doors.

Common Questions About CEL6XE9XXV Air Hinge Use

Select This Salice Air Hinge For Concealed Projects

The Salice America 105 degree opening integrated soft-closing air hinge, in nickel-plated finish, combines invisible installation with three way adjustment, which supports clean cabinet faces and precise reveals on both wood and aluminum-framed doors within the stated size and weight limits.