105˚ Opening Integrated Push-to-Open Air Hinge, Titanium

105 Degree Air Hinge For Invisible Cabinet Doors

105 Degree Opening Integrated Self-Closing Air Hinge is a Salice America hinge designed as an invisible hinge for cabinet doors. The hinge has only 10 mm height, so it recesses fully into the cabinet door and cabinet, keeping the hinge concealed while the door operates normally. It is classified as an invisible hinge and fits the Invisible and Recessed Hinges category, which keeps the focus on clean cabinet lines instead of exposed hardware. The hinge is recessed into both the cabinet door and cabinet itself, so the door swings on a concealed pivot rather than a surface-mounted arm. A 105 degree opening angle lets the door open wide enough for everyday access while controlling the swing. The integrated self-closing Air hinge mechanism is available with a push self-opening design, so the hinge can support door movement without external devices.

Key Salice Air Hinge Details For Projects

• The Salice Air hinge has only 10 mm height, so it seats entirely inside the door and cabinet thickness, which keeps the hinge hidden while allowing full cabinet function.
• The hinge is fully recessed into cabinet door and cabinet itself, so the hinge body sits inside machined pockets, which supports clean cabinet faces and reduces external projections.
• The Air hinge is categorized as an invisible hinge, so it is intended for installations where visible hinge leaves are not desired, supporting a streamlined cabinet appearance.
• The hinge offers a 105 degree degree of opening, so doors open sufficiently for access while limiting over-travel, which helps control door swing near adjacent cabinets.
• The product is available with a push self-opening mechanism, so a door can be opened by activating the hinge mechanism, which supports handle-free cabinet designs.
• The Air hinge is available in a titanium finish, so the hinge color can coordinate with other titanium-tone hardware where the mortised areas may be visible during door movement.

Recessed Hinge Mounting And Adjustment Function

The Salice Air hinge is attached to the top and bottom panel of the cabinet, so each door is supported at two points along its vertical edge rather than by side-mount arms. A 16.5 mm deep metal cup provides the main seating depth in the door, so boring operations can be set to a consistent depth for repeatable fitting. The hinge comes with three way adjustment, so the installed door position can be fine-tuned in three directions to improve reveals and alignment between doors. Possible drilling distance on the door for wood doors ranges from 3 mm to 6 mm, so the cup position along the edge can be set within that range to match the required overlay and alignment targets for the run of cabinets.

Using This Salice Air Hinge In Cabinet Work

Where This Air Hinge Fits In Cabinet Construction

This Salice America Air hinge is designed for minimum 18 mm thick wood doors or panels, so it works with typical 3/4 inch cabinet door stock used in many woodworking projects. It is also designed for aluminum-framed doors, so it can be applied where a cabinet design mixes aluminum frames with standard case construction. Maximum door weight is 44 lb (20 kg), so a single door using this hinge set can be sized within that load while remaining supported by the hinge geometry. Maximum dimensions of the door are 2,100 mm height and 610 mm width, so tall or wide fronts within those limits can be hinged using this model. The hinge belongs to the Invisible Hinges product class, so it is aimed at applications where recessed, modern cabinet fronts are preferred instead of traditional exposed hinges. The hinge is available in finishes of nickel or titanium, so hinge color choice can be matched to other project hardware where mortise visibility may occur.

How Air Hinge Design Supports Repeatable Results

The Salice Air hinge is fully recessed into both door and cabinet panels, so once the pockets are machined to the 16.5 mm cup depth and specified positions, each hinge seats consistently for repeatable results across multiple doors. The three way adjustment capability within the hinge allows small corrections after door mounting, so slight variations in boring or case construction can be compensated without rebuilding parts. The possible drilling distance range from 3 mm to 6 mm on wood doors lets layouts be tuned during boring, so overlay relationships and gaps can be kept consistent along a cabinet run using the same hinge model. The 105 degree opening angle is defined for this hinge, so casework can be planned around that swing, reducing interference with adjacent components when doors operate. Mounting the hinge to the top and bottom panel of the cabinet positions the pivot at two stable points, so door movement follows a predictable path once installed.

Common Questions About This Salice Air Hinge

Selecting This Air Hinge For Your Next Cabinet Run

The Salice America 105 Degree Opening Integrated Self-Closing Air Hinge in titanium provides an invisible hinge option that recesses completely into 18 mm wood or aluminum-framed doors. With three way adjustment, 16.5 mm deep metal cup design, and 105 degree opening angle, it supports precise alignment and defined door movement. Using the specified maximum door weight of 44 lb and maximum dimensions of 2,100 mm by 610 mm, cabinet doors can be sized within the hinge design envelope. For projects calling for invisible and recessed hinges, this Salice Air hinge offers a concealed solution tailored to these dimensions and mounting requirements.