Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynapro 2D right-hand front locking device is a Grass America front locking device with flange designed for Dynapro drawer systems. It provides 2D or 3D adjustment for drawers, so installers can dial in height, side, and in some versions depth alignment after mounting the drawer. The device is suitable for standard width or inset drawers, helping one part serve multiple cabinet layouts. A minimum inside drawer width of 5-7/8 inches, or 150 mm, is specified, which defines the smallest drawer box size where this right-hand device is intended to function within its design range. The lightweight, high strength material keeps the component easy to handle during installation while supporting the drawer in service. As a right-hand front locking device, it works on the right side of the drawer front connection, pairing with a corresponding left-hand unit in typical Dynapro installations.
The Dynapro front locking device with flange provides 2D or 3D adjustment for drawers, so once the runner system is installed, the drawer front can be shifted using the device rather than reworking joints. Height adjustment range of plus 3.5 mm lets the installer move the drawer front up relative to the runner position to align with adjacent fronts. Side adjustment range of plus or minus 1.5 mm provides lateral fine tuning, which helps create even reveals between drawers and doors. Depth adjustment range of plus 3.0 mm forward adjustment, specified for the 3D version only, allows limited front-to-back positioning to set how the drawer front sits relative to the cabinet face. Pre-drilling with a 3/32 inch, or 2.5 mm, bit is recommended in the description, guiding hole sizing for fastening and contributing to a cleaner installation process.
The Grass America Dynapro 2D right-hand front locking device with flange is specified for drawers using the Dynapro system, so it serves as the front connection point between the drawer box and slide on the right side. Its suitability for standard width or inset drawers supports both overlay and inset-style drawer layouts using the same core hardware family. The stated minimum inside drawer width of 5-7/8 inches, or 150 mm, defines where this right-hand device is meant to operate, aligning with typical small to large cabinet drawer widths. Lightweight, high strength material makes the device practical to handle when fitting multiple drawers, reducing hand strain while retaining structural capability in the front connection area. By providing 2D or 3D adjustment for drawers, the device becomes a key tuning element whenever fronts need visual alignment across a project.
The height adjustment range of plus 3.5 mm gives room to shift the drawer front upward relative to the slide, which helps correct small layout differences between cabinet sections without modifying the cabinet face. Side adjustment range of plus or minus 1.5 mm lets the installer move the drawer front left or right, supporting tight and consistent vertical reveals between stacked drawers. Depth adjustment range of plus 3.0 mm forward adjustment, defined for the 3D version only, allows controlled projection of the drawer front from the cabinet, which is particularly useful when working against face frames or detailed trim. Because the device provides 2D or 3D adjustment for drawers from a single front connection point, it simplifies fine tuning on site and reduces the need for extensive shimming or re-drilling. Pre-drilling with a 3/32 inch, or 2.5 mm, bit, as specified, supports accurate pilot holes for the device and helps maintain consistent positioning across multiple drawers.
The Dynapro 2D right-hand front locking device with flange is a Grass America front locking device for Dynapro drawer systems, serving as the right-side front connection that also provides adjustment functions.
The device provides height adjustment of plus 3.5 mm and side adjustment of plus or minus 1.5 mm, allowing the drawer front to be shifted up and sideways to match surrounding fronts.
The Dynapro front locking device description specifies a depth adjustment range of plus 3.0 mm forward adjustment for the 3D version only, which sets how far the drawer front projects from the cabinet.
The locking device is specified for standard width or inset drawers, so it supports both typical overlay configurations and inset drawer applications within the Dynapro system.
The description lists a minimum inside drawer width of 5-7/8 inches, or 150 mm, defining the smallest internal drawer box width suited to this right-hand front locking device.
The product description recommends pre-drilling with a 3/32 inch, or 2.5 mm, bit, providing guidance on pilot hole sizing when fastening the front locking device.
The Dynapro 2D right-hand front locking device with flange from Grass America pairs with Dynapro drawer slides while providing 2D or 3D adjustment for drawers. Specified ranges for height, side, and depth adjustment, along with the defined minimum inside drawer width, help match this right-hand device to the drawer construction on the project. Lightweight, high strength material supports handling and service demands at the drawer front. When a Dynapro installation calls for precise visual alignment on standard width or inset drawers, this right-hand front locking device offers defined mechanical adjustment within the Dynapro system.
Sold In: 1 Each
