Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynapro 2D left hand front locking device is a Grass America front locking device that supports accurate adjustment of Dynapro drawers, so drawer fronts can be aligned cleanly in cabinetry runs. This left hand front locking device is identified as F134108950233, which lets shops match it to drawings and order repeat parts with confidence. The unit provides 2D or 3D adjustment for drawers, giving installers height, side, and optional depth fine-tuning so fronts can be brought into the same plane. It works for standard width or inset drawers, so the same part handles common face frame or frameless design choices. A minimum inside drawer width 5-7/8 in (150 mm) is specified, which tells the builder when this device fits the drawer layout. The locking device uses lightweight, high strength material, which keeps the drawer hardware lighter while still supporting normal drawer use in cabinetry projects.
Pre-drilling recommended 3/32 in (2.5 mm) gives a clear drill size for mounting, which speeds shop setup and reduces split risk at the front of the drawer box. The device provides 2D or 3D adjustment for drawers, so on 3D applications the hardware supports depth tuning along with height and side. Depth adjustment range plus 3.0 mm forward adjustment, available on the 3D version only, lets the drawer front move slightly toward the cabinet face, which helps bring faces flush with neighboring fronts or adjacent doors. Height adjustment range plus 3.5 mm gives upward travel that can clean up uneven reveals under a countertop or rail. Side adjustment range plus or minus 1.5 mm lets the installer shift the drawer front left or right, helping equalize gaps and avoid rubbing against adjacent components.
This Dynapro 2D left hand front locking device from Grass America is suited to Dynapro drawer projects needing front adjustment on the left side of the drawer box, so a matched part can be used across a run of cabinets. It works for standard width or inset drawers, fitting typical kitchen, bath, and casework situations where fronts must align to neighboring fronts or doors. The minimum inside drawer width 5-7/8 in (150 mm) means the device is aimed at drawers with at least this internal span, so this value can be used during design when sizing smaller drawers. Height adjustment range plus 3.5 mm allows installers to nudge the front upward relative to the slide position, which helps match lines under countertops or top rails. Side adjustment range plus or minus 1.5 mm gives small but useful lateral motion to equalize reveals between drawer fronts in stacks or banks.
The device provides 2D or 3D adjustment for drawers, and that flexibility helps bring fronts into plane after the boxes and fronts are already built. On installations using the 3D version, the depth adjustment range plus 3.0 mm forward adjustment lets the front move slightly toward the face of the cabinet, which is useful when fine-tuning overlay or inset alignment. Using the specified pre-drilling recommended 3/32 in (2.5 mm) helps create consistent pilot holes, so screws track straight and the device sits in a repeatable position on each drawer. Lightweight, high strength material keeps stress on the drawer front area lower while still supporting the locking and adjustment function over repeated adjustments. The manufacturer part number F134108950233 identifies this specific left hand unit, which simplifies ordering the same locking device again for service work or for matching new cabinets to an existing installation.
The Dynapro 2D left hand front locking device provides 2D or 3D adjustment for drawers, which lets installers fine-tune height, side, and, on 3D versions, depth for cleaner front alignment.
The device is specified for standard width or inset drawers, so it serves projects where drawer fronts sit between gables or face frame members.
The Dynapro 2D left hand front locking device is specified for a minimum inside drawer width 5-7/8 in, or 150 mm, guiding its use on narrower drawer boxes.
The locking device offers a height adjustment range of plus 3.5 mm, allowing upward movement of the drawer front to refine vertical reveals.
The Dynapro front locking device provides side adjustment range of plus or minus 1.5 mm, giving lateral fine-tuning to align gaps between neighboring fronts.
Pre-drilling recommended 3/32 in, or 2.5 mm, provides a clear pilot size that supports consistent mounting without splitting the drawer material.
The Dynapro 2D left hand front locking device from Grass America combines 2D or 3D adjustment for drawers with defined ranges for height, side, and depth, so installers can plan predictable alignment. With its minimum inside drawer width 5-7/8 in (150 mm), lightweight, high strength material, and specified pre-drilling recommended 3/32 in (2.5 mm), this F134108950233 front locking device offers a clear spec for drawer projects that depend on precise, repeatable front adjustment.
Sold In: 1 Each
