Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the right-hand, no-flange front locking device for Grass Dynapro undermount drawer slides, providing two-direction adjustment to true the drawer front after hanging. It is a system-specific component — it works with Dynapro slides only and is not interchangeable with locking devices from other undermount programs.
The front locking device is the connection point between the drawer box and the Dynapro undermount slide. After the slide is mounted and the drawer box is set on the runners, the locking device clips under the front of the box and locks the drawer in place. Once locked, the 2D adjustment range lets the installer shift the front in height and side to close gaps and align reveals without pulling the drawer back out. That two-step sequence — hang, then dial — is where this clip earns its place in a production workflow.
The no-flange version is the right choice when the drawer box front edge is flat, with no recessed step for a flanged clip to register against. Shops running frameless box programs on a CNC often land here; the specific box construction drives the clip choice more than any other variable.
The clip body is molded plastic, which is standard for locking devices in this product class. The green color is a functional identifier within the Dynapro system — it marks the 2D adjustment version at a glance on the shelf or in the bin, reducing the chance of grabbing the wrong variant on a busy install day. The snap-fit mechanism is engineered to the Dynapro platform's tolerances, so the engagement and release feel are consistent across the system.
Cabinet shops running Grass Dynapro undermount slides need one right-hand and one left-hand front locking device per drawer to complete each installation. This clip covers the right side. If your shop builds flat-front drawer boxes without a flange profile at the front edge, the no-flange version is the correct selection. Designers and contractors specifying Dynapro installations should confirm the box construction with the cabinet shop to land on the right clip style before the order goes in.
No. This locking device is engineered for the Grass Dynapro system only. It will not fit TANDEM, Movento, Actro, or other undermount runners — locking devices are brand- and series-specific.
One. This is the right-hand clip only. A complete drawer requires one right-hand and one left-hand front locking device — order both orientations.
Green identifies this as the 2D adjustment version within the Dynapro locking device family. Other Dynapro locking devices carry different color codes corresponding to their adjustment class.
The choice depends on how the drawer box front is constructed. A flat front edge with no recessed step takes the no-flange clip. A box with a front flange profile takes the flanged version. Check the drawer box spec or the Dynapro installation guide for your box program.
Height and side. After the drawer is hung, the clip's adjustment lets you move the front up to +3.5 mm in height and +/- 1.5 mm side to side to align the reveal.
One right clip in the right orientation with the right box profile, and the drawer front goes on straight — dial the reveal, release with a press, and move to the next box.
Sold In: 1 Each
