Rev-A-Shelf 4WCT Series 21-1/8"Wx22"Dx2-3/8"H Walnut Cutlery Tray Insert, -4WCT-WN-3SH

Choose a walnut cutlery tray insert

walnut cutlery tray insert gives a drawer a dedicated place for organizing flatware in a clean, built-in layout. The Rev-A-Shelf cutlery tray insert is a drawer insert made from solid walnut and finished with a UV cured satin finish. This silverware tray is designed for frameless cabinets and is listed at 21-1/8 inches wide, 22 inches deep, and 2-3/8 inches high. The trimmable design can help installers adapt the fit to the drawer opening when project conditions require adjustment. Buyers searching for RS4WCT-WN-3SH or a solid walnut cutlery insert can use these verified details to confirm whether this insert matches the drawer size, cabinet style, and finish direction of the job before ordering.

See how this drawer insert helps

• Solid walnut construction - The Rev-A-Shelf cutlery tray insert uses real walnut for a durable wood interior look that suits cabinet upgrades and custom drawer layouts.
• UV cured satin finish - The finished surface helps provide a consistent appearance and a ready-to-install presentation without needing site finishing.
• Trimmable design - This drawer insert can help installers fine-tune fit when the drawer opening needs adjustment within the limits of the product design.
• For frameless cabinets - The product is specified for frameless cabinets, which helps buyers narrow compatibility before placing an order.
• 21-1/8 inch width - The listed width gives buyers a clear starting point when checking drawer box dimensions and side clearance.
• 22 inch depth - The stated depth helps confirm front-to-back drawer space for a full cutlery tray insert installation.
• 2-3/8 inch height - The tray height helps buyers review drawer side height and available vertical space before install.
• Rev-A-Shelf cutlery tray insert format - The dedicated cutlery layout supports organized storage for silverware instead of using loose bins or generic plastic trays.

Confirm fit for this silverware tray

Key specs to confirm: This Rev-A-Shelf drawer insert is listed at 21-1/8 inches wide, 22 inches deep, and 2-3/8 inches high. It is described as a trimmable solid walnut cutlery tray insert with a UV cured satin finish for frameless cabinets. Before purchase, confirm your actual drawer box inside width, inside depth, side height, and whether trimming is appropriate for your installation plan. If you are comparing this item to RS4WCT-WN-1SH or RS4WD-22SH-WN-1, confirm the exact dimensions and layout in the manufacturer documentation rather than assuming interchangeability. Any load, compliance, or safety details are not provided here and should be confirmed with the manufacturer or technical documentation.

What's included: Verified information shows the product is packed and sold as shown below, but the exact included components are not fully listed in the provided data. Confirm included pieces if your project requires hardware, instructions, or additional inserts.

What to verify before ordering: Confirm frameless cabinet application, drawer interior measurements, desired cutlery layout, whether trimming is needed, and whether the listed walnut finish matches the rest of the drawer interior package.

Use this Rev-A-Shelf cutlery tray insert

Match this silverware tray to daily use

A Rev-A-Shelf cutlery tray insert is often chosen when a basic loose tray shifts inside the drawer or leaves wasted space around the edges. In a kitchen remodel, shop build, or cabinet refresh, a wood drawer insert can give silverware a more fixed layout that matches the cabinet interior better than a drop-in plastic organizer. This product is a solid walnut cutlery insert with a UV cured satin finish, so it is suited to buyers who want a wood interior component rather than a mixed-material organizer.

The listed dimensions of 21-1/8 inches wide, 22 inches deep, and 2-3/8 inches high matter most when the drawer opening is already built and the organizer must fit the available space. The trimmable format can be useful for installers who need some adjustment during fit-up, but buyers should still measure the actual inside drawer dimensions before ordering. Trimming does not remove the need to confirm width, depth, and height. It is also important to verify that the cabinet application is frameless cabinets, because that is the compatibility detail provided in the product data.

This drawer insert can fit several practical scenarios. A professional installer may use it in a frameless kitchen project where the homeowner wants a walnut silverware tray that aligns with other wood accessories. A cabinet shop may specify it for a drawer that needs a built-in cutlery layout with a finished appearance. A serious DIY buyer may choose it when replacing a generic organizer with a dedicated walnut drawer insert. In each case, the main value comes from matching the verified dimensions, cabinet style, and material to the actual drawer.

If you are searching by reference numbers such as RS4WCT-WN-3SH, RS4WCT-WN-1SH, or RS4WD-22SH-WN-1, use those references as a starting point only. Model numbers in the same family can differ in width, compartment layout, or intended drawer size. Confirm the exact product drawing or specification sheet before finalizing the order.

Compare this drawer insert with basic trays

When buyers compare a walnut cutlery tray insert to a generic organizer, the main differences usually come down to material, fit, and cabinet integration. This Rev-A-Shelf cutlery tray insert is made from solid walnut and has a UV cured satin finish, which gives it a furniture-style wood appearance that many cabinet projects call for. A generic tray may still organize silverware, but it may not match the drawer interior or cabinet package the same way.

Another important difference is application fit. This product is specified for frameless cabinets and includes listed dimensions, so it supports a more exact fit check before purchase. That matters for trade buyers who need to reduce ordering mistakes and keep installation moving. A tray without clear dimensions or cabinet application notes can create more guesswork at install time.

The trimmable design also changes how buyers evaluate the product. Instead of assuming one fixed size will work in every drawer, installers can review whether the insert can be adjusted to suit the opening. That does not mean every drawer is automatically compatible, but it does provide a practical path when the opening is close to the listed size. For a project where wood species, finish direction, and cabinet style matter, a solid walnut cutlery insert from Rev-A-Shelf can be easier to align with the rest of the job than a non-matching organizer. The right choice depends on careful measurement, cabinet type confirmation, and checking what is included before ordering.

Ask fit questions before drawer install

Order the right walnut drawer insert

walnut drawer insert selection starts with accurate drawer measurements and the right cabinet application. This Rev-A-Shelf cutlery tray insert offers solid walnut construction, a UV cured satin finish, and a trimmable format for frameless cabinets. Before purchase, confirm the 21-1/8 inch width, 22 inch depth, 2-3/8 inch height, and the exact included components for your order. Careful fit checks help ensure the silverware tray matches the drawer opening and the finish direction of the project.