Grass Maxcess Undermount Drawer Slides Front Locking Devices with Flange 1-D Left

Grass Maxcess Front Locking Device Purpose

Grass Maxcess undermount drawer slide front locking device uses a dedicated left 1-D front locking unit to secure the front of the drawer to the Maxcess undermount slides, which gives a defined connection point for consistent drawer engagement on the slide system. The Grass America branding links this part directly to the Maxcess undermount platform, so installers can keep the slide system using matching components from the same manufacturer. The left-hand design works together with a separate right-hand unit, so each front corner of the drawer has its own locking point that holds the drawer on the slide hardware. One right and one left are required per drawer, so every drawer box in a run follows the same fastening method and adjustment approach at the front. The 1-D designation identifies this as a dedicated locking and height-adjustment point at the front of the drawer.

Key Grass Maxcess Front Locking Details

• The product is a left front locking device for Grass Maxcess undermount drawer slides, so it serves as the left-side front connection between drawer and slide in that specific system.
• One right and one left are required per drawer, so each drawer front is supported at both corners with matched locking devices that share the same adjustment range.
• The height of the drawer can be adjusted by 3/32 inch, or 2.5 mm, via the green adjustment plate, so installers can fine-tune the vertical position of the drawer front relative to the cabinet.
• The green adjustment plate is integrated into the locking device, so height changes happen directly at the front lock point where reveal differences are most visible.
• The manufacturer part number 02498-12S identifies this specific left front unit, so repeat orders and replacements can be matched precisely to existing Grass Maxcess installations.

Front Locking Device Installation And Adjustment

The Grass Maxcess front locking device left positions at the front underside of the drawer, so it interacts directly with the corresponding Maxcess undermount slide to capture the drawer front. Because one right and one left are required per drawer, each drawer is assembled with a mirrored set of front locking points that align the front corners with the slides. The green adjustment plate on this device allows a 3/32 inch, or 2.5 mm, drawer height adjustment, so installers can raise or lower the drawer front relative to the slide while the drawer remains mounted. That adjustment range at the front locking point provides enough movement to correct minor layout variances and achieve even reveals across a cabinet run using the same Grass Maxcess slide family.

Using This Grass America Locking Device In Projects

Where This Left Front Locking Device Fits

This left front locking device is designed for Grass Maxcess undermount drawer slides, so it fits into projects that are already built around the Maxcess undermount platform from Grass America. Because it is the left-hand front unit, it installs on the left underside of the drawer front where the Maxcess slide engages. One right and one left are required per drawer, so every drawer using Maxcess slides can be set up with a matched pair of front locks that share the same geometry and adjustment method. The manufacturer part number 02498-12S ties this device to Grass America production, so shops standardizing on Maxcess hardware can reference the number when matching hardware to existing layouts or documentation.

How Height Adjustment Supports Clean Alignment

The drawer height adjustment of 3/32 inch, or 2.5 mm, via the green adjustment plate on this locking device gives installers a controlled way to refine vertical alignment at the drawer front. Because the adjustment mechanism is built into the front locking device, any height change happens exactly where the drawer front meets the cabinet face, which is where reveal lines are most visible. On a run of drawers using Grass Maxcess undermount slides, the paired left and right front locking devices on each drawer can be set to the same height range so drawer fronts sit level with one another. The green adjustment plate provides a clear visual reference point on the hardware, which helps installers repeat the same height setting across multiple drawers when trimming in final reveals.

Common Questions About Grass Maxcess Locking Device

Selecting This Left Front Device For Maxcess

The Grass Maxcess undermount drawer slide front locking device in this left-hand 1-D version provides the dedicated left connection and 3/32 inch, or 2.5 mm, height adjustment needed at the drawer front. One right and one left are required per drawer, so every drawer using Grass Maxcess undermount slides can share the same front locking layout and height-adjustment method. With the Grass America part number 02498-12S identifying this left unit, ordering focuses on matching Grass Maxcess projects that need accurate front locking and repeatable drawer height alignment on the left side.