
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Grass Maxcess undermount drawer slides front locking devices are designed as the front locking point for Grass Maxcess undermount drawer slides, so the drawer engages securely with the slide system during everyday use. This right-front locking device is supplied as Manufacturer Part 02499-12S from Grass America, giving installers a clear reference when matching components on a job or planning repeat orders. The design is classified as an accessory for drawer slides, so it functions as a dedicated connection point rather than a general-purpose bracket. Each drawer requires one right and one left front locking device, which defines how many right-side units are needed when laying out a bank of drawers. Grass America branding aligns this part with the Maxcess undermount platform, supporting consistent system selection across a project.
The right-front locking device integrates a green adjustment plate that provides 3/32 inch, or 2.5 mm, of drawer height adjustment, so the drawer front can be aligned neatly with adjacent fronts without changing cabinet construction. Because the adjustment happens at the locking device, corrections to the vertical position can be made at the front of the drawer where the reveal is most visible, helping installers dial in consistent gaps. As an accessory for Grass Maxcess undermount drawer slides, this device supports the intended fit between the drawer box and the slide, maintaining proper engagement while height changes are applied through the adjustment plate.
This right-front locking device with flange is used at the front right corner of a drawer that runs on Grass Maxcess undermount drawer slides, providing the locking interface to the slide at that location. Because each drawer requires one right and one left device, this part becomes the standard right-side component across all drawers using the same undermount system on a project. The accessory classification within drawer slide accessories signals that it is meant to work directly with the slide hardware, supporting the floating feel typical of undermount drawers while anchoring the front of the box to the running gear. The flange and locking geometry are configured for the Maxcess platform, so the device aligns the drawer front with the slide track intent at the right side.
The green adjustment plate built into the locking device offers 3/32 inch, or 2.5 mm, of drawer height adjustment, which gives installers a controlled range to correct vertical reveals without cutting or rebuilding drawer components. Because the adjustment lives in the front locking device, it directly affects how the drawer front meets the face frame or case front, letting the user nudge the box up or down relative to neighboring fronts for a straight visual line. Tying height control to a color-identified green plate also simplifies on-site adjustments, because the adjustment element is visually distinct from the rest of the hardware, helping installers return to the same component when fine tuning. In repeat work, this 2.5 mm range becomes a predictable tolerance window when building drawer boxes, knowing that small variances can be reconciled at the hardware rather than at the saw.
Manufacturer Part 02499-12S identifies the Grass America right-front locking device for Maxcess undermount drawer slides, so the correct side-specific part can be selected or reordered for matching installations.
The product is described as a right front locking device, so it is intended for the right front position on a drawer, with a separate left device required to complete the pair.
Each drawer requires one right and one left locking device, so a bank of drawers uses one right-front unit and one left-front unit for every drawer box that runs on the system.
The green adjustment plate in the locking device provides 3/32 inch, or 2.5 mm, of drawer height adjustment, which allows fine tuning of front reveals after the drawer is installed.
The device is described as a front locking device with flange, so the flange forms part of the front engagement area where the drawer interfaces with the undermount slide hardware.
The locking device is specified for Grass Maxcess undermount drawer slides, so it serves as the matching front locking component that connects the drawer box to that slide system.
This right-front locking device from Grass America, identified as Manufacturer Part 02499-12S, is specified for Grass Maxcess undermount drawer slides, so it pairs with that system on new builds or service work. With one right and one left unit required per drawer, project counts stay straightforward when planning hardware needs across multiple drawer openings. The integrated green adjustment plate delivers 3/32 inch, or 2.5 mm, of vertical tuning at the front, helping align drawer fronts into a consistent visual plane. For jobs built around the Grass Maxcess undermount platform, this right-front locking device provides the defined front connection and adjustment range that support precise drawer fit.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | GF02498-12 Mfr# 02498-12S | Grass Maxcess Undermount Drawer Slides Front Locking Devices with Flange 1-D Left |