Maxcess Elite Plus 1D Locking Device For Drawers

Maxcess Elite Plus 1D locking device is a right-hand universal locking device with flange from Grass America, designed as a drawer slides accessory for Maxcess and Elite Plus 1D systems. This right-hand unit works together with a matching left-hand device, so one right and one left are required per drawer for proper locking performance. The flange on this version identifies it as a right flanged front locking device, aligning with Grass manufacturer part number 02496-12. A lip is integrated into the design to mount to the bottom of the drawer, tying the drawer box to the slide hardware. A green adjustment plate built into the device allows the height of the drawer front to be adjusted by 3/32 inch, or 2.5 mm, which helps align drawer fronts within a run of cabinets.

Key Locking Device Details For Drawer Work

• This Grass America right-hand universal locking device with flange is part of the Maxcess and Elite Plus 1D systems, so installers can match it to that specific drawer slide family in shop or jobsite layouts.
• The component is described as a right flanged front locking device, which identifies both its orientation and front-mount role when planning hardware placement on the drawer box.
• One right and one left are required per drawer, so each drawer uses a pair of locking devices to secure the drawer member of the slide assembly on both sides.
• The device features a lip for mounting to the bottom of the drawer, giving a defined contact edge for setting the hardware consistently along the drawer underside.
• A green adjustment plate provides 3/32 inch (2.5 mm) drawer height adjustment, letting installers fine-tune vertical alignment of drawer fronts relative to surrounding fronts.

Bottom Mount And Height Alignment Details

This Grass America locking device is identified as a right flanged front locking device and mounts at the drawer front, tying into Maxcess or Elite Plus 1D drawer slides. The built-in lip allows the device to sit at the bottom of the drawer, so the hardware references from the drawer underside during layout. The universal locking device design means it serves as the locking interface between the drawer and the slide system. The integrated green adjustment plate provides 3/32 inch, or 2.5 mm, of drawer height adjustment at the hardware, allowing the installer to shift the drawer front vertically after mounting the device.

Using This Grass Device In Drawer Projects

Where This Right-Hand Flanged Device Fits

This right-hand universal locking device with flange is described as a drawer slides accessory for Maxcess and Elite Plus 1D systems, so it fills the role of a front locking connection on the right side of the drawer. The SAP description and web description both refer to it as a right flanged front locking device, identifying its place at the front of the drawer box. Because one right and one left are required per drawer, this device is used on the right side while a corresponding left-hand unit is used on the opposite side. The lip that mounts to the bottom of the drawer positions the device along the underside, so it works with drawer construction that allows bottom mounting at the front.

How Adjustment And Mounting Support Consistent Results

The green adjustment plate built into this Grass America locking device provides 3/32 inch (2.5 mm) of drawer height adjustment, which allows the installer to move the drawer front up or down slightly after the device is mounted. This adjustment range is useful when aligning multiple drawer fronts, since it lets the installer fine-tune the vertical position without remaking the drawer. The front locking role of the device means this height change directly affects how the drawer front lines up with adjacent fronts. The lip that mounts to the bottom of the drawer creates a repeatable reference, so multiple drawers can be set to the same hardware location and then dialed in with the same 2.5 mm adjustment capability. As part of the Maxcess or Elite Plus 1D drawer slides accessory family, this right-hand unit is selected when a flanged right front locking device is required to match Grass part number 02496-12.

Common Questions About Grass 02496-12 Use

Selecting This Grass Device For Your Drawer Run

The Grass America Maxcess and Elite Plus 1D right-hand universal locking device with flange, part number 02496-12, provides front locking and height adjustment at the bottom of the drawer. When a drawer project calls for one right and one left locking device per drawer, this right-hand unit supplies the right-side component with a lip for mounting to the drawer underside and a green plate offering 3/32 inch, or 2.5 mm, of vertical adjustment. For drawer runs built around Maxcess or Elite Plus 1D slides, this right flanged front locking device is selected when that specific Grass part is required on the hardware list.